display/GFX issue with Ubuntu 16.04 not seen in 14.04

Jim Abernathy jfabernathy at outlook.com
Wed Aug 24 12:16:44 UTC 2016



On 08/24/2016 08:10 AM, Jim Abernathy wrote:
>
>
> On 08/24/2016 07:16 AM, Jim Abernathy wrote:
>>
>>
>> On 08/23/2016 10:33 AM, Christopher Barry wrote:
>>> On Tue, 23 Aug 2016 06:53:13 -0400
>>> Jim Abernathy <jfabernathy at outlook.com> wrote:
>>>
>>>> On 08/19/2016 10:17 AM, Jim Abernathy wrote:
>>>>> Not having much luck with the Distro forums on this issue so I
>>>>> thought I'd ask for advice here.
>>>>>
>>>>> I've been running Ubuntu 14.04.5 for some time on Intel Core i5 GFX
>>>>> without any issues.  My display is HDMI from the PC to an Onkyo A/V
>>>>> receiver then to a Sony KDL-XBR6.
>>>>>
>>>>> When I try a fresh install of 16.04.1, I get a display that blanks
>>>>> out for 3-5 seconds at random times depending on what is being
>>>>> displayed at the time.  I also have small abouts of video noise that
>>>>> is random horizontal lines about 1 pixel tall scattered through the
>>>>> page.
>>>>>
>>>>> I noticed that 14.04.05 uses X server 1.17.2 and 16.04.1 uses 1.18.3.
>>>>>
>>>>> When I do the command xrandr --verbose I see some small differences
>>>>> between 14.04 and 16.04, but it's things like 2 digits displayed
>>>>> instead of 1.  i.e. 60.0 vs. 60.00. I'm only concerned with 1080P HD.
>>>>>
>>>>> I've tried this on different computers all with Intel GFX. same
>>>>> results.
>>>>>
>>>>> This does not occur on other monitors or TVs.
>>>>>
>>>>> I'd blame it on Sony and Onkyo if they didn't work so well with
>>>>> Windows, all versions, and ubuntu all versions except 16.04.
>>>>>
>>>>> It's almost like the auto detection software in the newest version
>>>>> of X is off just enough to make my display flaky.  Kind of like the
>>>>> old analog CRT TVs that were sensitive to small tweaks to the
>>>>> horizontal and vertical adjustments.
>>>>>
>>>>> Any help would be appreciated.
>>>>>
>>>>> Jim A
>>>> Can someone let me know where I can ask questions regarding problems
>>>> with X??  I thought this forum would be the place?
>>>>
>>>> Jim A
>>>>
>>> Jim,
>>>
>>>  From the data above, I do not think it's possible to troubleshoot very
>>> effectively. It also seems like (to me anyway) that you have a fairly
>>> non-standard kind of configuration going on.
>>>
>>> If I understand it, you have a media-center type PC with an integrated
>>> Intel graphics card on an core i5 processor. Using an HDMI cable, 
>>> you're
>>> plugging into an Onkyo A/V receiver (you do not mention the model),
>>> which in turn connects to a Sony KDL-XBR6 LCD TV.
>>>
>>> What happens when you connect your PC to a the Sony directly or to
>>> a normal PC LCD monitor? Does that work?
>>>
>>> Are you using an xorg configuration file, or are you allowing automatic
>>> setup via kernel mode switching? If you a have config file(s), what
>>> happens when you move them out of the way temporarily and allow
>>> automatic config?
>> I'm using automatic setup on install. I played with the concept of 
>> creating an xorg.conf file. It's not as easy as it used to be.  I 
>> tried without success to create an entry with a modeline statement 
>> but it messed things up so I abandoned that path of debug.
>>> What's in your /var/log/Xorg.0.log?
>> I'll post the Xorg log later when I'm back at that PC.  I looked at 
>> it to confirm no errors and which xorg configuration file it was 
>> using.  I'll post one from my test system that has nothing but 16.04 
>> installed plus current updates.
>
> Below is the part of dmesg related to Intel:
> jim at test:~$ dmesg | grep intel
> [    1.504215] intel_idle: MWAIT substates: 0x21120
> [    1.504218] intel_idle: v0.4.1 model 0x2A
> [    1.504221] intel_idle: lapic_timer_reliable_states 0xffffffff
> [    2.891286] fb: switching to inteldrmfb from EFI VGA
> [    3.190749] fbcon: inteldrmfb (fb0) is primary device
> [    3.190970] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [    6.280413] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
> [    6.601171] intel_rapl: Found RAPL domain package
> [    6.601179] intel_rapl: Found RAPL domain core
> [    6.601183] intel_rapl: Found RAPL domain uncore
> [   37.185938] [drm:intel_set_pch_fifo_underrun_reporting [i915]] 
> *ERROR* uncleared pch fifo underrun on pch transcoder A
> [   37.185988] [drm:intel_pch_fifo_underrun_irq_handler [i915]] 
> *ERROR* PCH transcoder A FIFO underrun
>
> Here is the xorg.log
>
>
Well it ended up attached as a file.  I was having so many problems when 
I opened up email, file browser, and gedit with the log file that the 
display was blank for 15-20 seconds and normal for 1-2 that it mad it 
almost impossible to get the information.  So the more stuff on the 
screen the more of a problem it is.  I'm not on another computer and 
will paste in the xorg.log

[     7.791]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[     7.791] X Protocol Version 11, Revision 0
[     7.791] Build Operating System: Linux 3.13.0-92-generic x86_64 Ubuntu
[     7.791] Current Operating System: Linux test 4.4.0-34-generic 
#53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 x86_64
[     7.791] Kernel command line: 
BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic.efi.signed 
root=UUID=620eae70-f47f-4693-af7b-4e165863134d ro quiet splash vt.handoff=7
[     7.791] Build Date: 22 July 2016  07:50:34AM
[     7.791] xorg-server 2:1.18.3-1ubuntu2.3 (For technical support 
please see http://www.ubuntu.com/support)
[     7.791] Current version of pixman: 0.33.6
[     7.791]     Before reporting problems, check http://wiki.x.org
     to make sure that you have the latest version.
[     7.791] Markers: (--) probed, (**) from config file, (==) default 
setting,
     (++) from command line, (!!) notice, (II) informational,
     (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.791] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 24 
07:59:18 2016
[     7.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.792] (==) No Layout section.  Using the first Screen section.
[     7.792] (==) No screen section available. Using defaults.
[     7.792] (**) |-->Screen "Default Screen Section" (0)
[     7.792] (**) |   |-->Monitor "<default monitor>"
[     7.793] (==) No monitor specified for screen "Default Screen Section".
     Using a default monitor configuration.
[     7.793] (==) Automatically adding devices
[     7.793] (==) Automatically enabling devices
[     7.793] (==) Automatically adding GPU devices
[     7.793] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.793] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not 
exist.
[     7.793]     Entry deleted from font path.
[     7.793] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not 
exist.
[     7.794]     Entry deleted from font path.
[     7.794] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not 
exist.
[     7.794]     Entry deleted from font path.
[     7.794] (WW) The directory "/usr/share/fonts/X11/100dpi" does not 
exist.
[     7.794]     Entry deleted from font path.
[     7.794] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     7.794]     Entry deleted from font path.
[     7.794] (==) FontPath set to:
     /usr/share/fonts/X11/misc,
     /usr/share/fonts/X11/Type1,
     built-ins
[     7.794] (==) ModulePath set to 
"/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     7.794] (II) The server relies on udev to provide the list of input 
devices.
     If no devices become available, reconfigure udev or disable 
AutoAddDevices.
[     7.794] (II) Loader magic: 0x5613949b6da0
[     7.794] (II) Module ABI versions:
[     7.794]     X.Org ANSI C Emulation: 0.4
[     7.794]     X.Org Video Driver: 20.0
[     7.794]     X.Org XInput driver : 22.1
[     7.794]     X.Org Server Extension : 9.0
[     7.802] (++) using VT number 7

[     7.802] (II) systemd-logind: logind integration requires -keeptty 
and -keeptty was not provided, disabling logind integration
[     7.803] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.828] (--) PCI:*(0:0:2:0) 8086:0106:8086:2044 rev 9, Mem @ 
0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[     7.828] (II) LoadModule: "glx"
[     7.837] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.865] (II) Module glx: vendor="X.Org Foundation"
[     7.865]     compiled for 1.18.3, module version = 1.0.0
[     7.865]     ABI class: X.Org Server Extension, version 9.0
[     7.865] (==) AIGLX enabled
[     7.865] (==) Matched intel as autoconfigured driver 0
[     7.865] (==) Matched intel as autoconfigured driver 1
[     7.865] (==) Matched modesetting as autoconfigured driver 2
[     7.865] (==) Matched fbdev as autoconfigured driver 3
[     7.865] (==) Matched vesa as autoconfigured driver 4
[     7.865] (==) Assigned the driver to the xf86ConfigLayout
[     7.865] (II) LoadModule: "intel"
[     7.866] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     7.869] (II) Module intel: vendor="X.Org Foundation"
[     7.869]     compiled for 1.18.1, module version = 2.99.917
[     7.869]     Module class: X.Org Video Driver
[     7.869]     ABI class: X.Org Video Driver, version 20.0
[     7.869] (II) LoadModule: "modesetting"
[     7.870] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.870] (II) Module modesetting: vendor="X.Org Foundation"
[     7.870]     compiled for 1.18.3, module version = 1.18.3
[     7.870]     Module class: X.Org Video Driver
[     7.870]     ABI class: X.Org Video Driver, version 20.0
[     7.870] (II) LoadModule: "fbdev"
[     7.870] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     7.870] (II) Module fbdev: vendor="X.Org Foundation"
[     7.870]     compiled for 1.18.1, module version = 0.4.4
[     7.870]     Module class: X.Org Video Driver
[     7.870]     ABI class: X.Org Video Driver, version 20.0
[     7.870] (II) LoadModule: "vesa"
[     7.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     7.871] (II) Module vesa: vendor="X.Org Foundation"
[     7.871]     compiled for 1.18.1, module version = 2.3.4
[     7.871]     Module class: X.Org Video Driver
[     7.871]     ABI class: X.Org Video Driver, version 20.0
[     7.871] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
     i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
     915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
     Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
     GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     7.871] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     7.871] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     7.871] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 
5200, 6200, P6300
[     7.871] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     7.871] (II) FBDEV: driver for framebuffer: fbdev
[     7.871] (II) VESA: driver for VESA chipsets: vesa
[     7.873] (II) intel(0): Using Kernel Mode Setting driver: i915, 
version 1.6.0 20151010
[     7.873] (II) intel(0): SNA compiled: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1 (Timo Aaltonen <tjaalton at debian.org>)
[     7.873] (II) intel(0): SNA compiled for use with valgrind
[     7.874] (WW) Falling back to old probe method for modesetting
[     7.874] (WW) Falling back to old probe method for fbdev
[     7.874] (II) Loading sub module "fbdevhw"
[     7.874] (II) LoadModule: "fbdevhw"
[     7.874] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     7.874] (II) Module fbdevhw: vendor="X.Org Foundation"
[     7.874]     compiled for 1.18.3, module version = 0.0.2
[     7.874]     ABI class: X.Org Video Driver, version 20.0
[     7.874] (WW) Falling back to old probe method for vesa
[     7.875] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD 
Graphics 2000
[     7.875] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, 
sse4.2; using a maximum of 2 threads
[     7.875] (II) intel(0): Creating default Display subsection in 
Screen section
     "Default Screen Section" for depth/fbbpp 24/32
[     7.876] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     7.876] (==) intel(0): RGB weight 888
[     7.876] (==) intel(0): Default visual is TrueColor
[     7.877] (II) intel(0): Output VGA1 has no monitor section
[     7.877] (II) intel(0): Enabled output VGA1
[     7.877] (II) intel(0): Output HDMI1 has no monitor section
[     7.877] (II) intel(0): Enabled output HDMI1
[     7.877] (II) intel(0): Output DP1 has no monitor section
[     7.877] (II) intel(0): Enabled output DP1
[     7.877] (II) intel(0): Output HDMI2 has no monitor section
[     7.877] (II) intel(0): Enabled output HDMI2
[     7.877] (II) intel(0): Output DP2 has no monitor section
[     7.877] (II) intel(0): Enabled output DP2
[     7.877] (--) intel(0): Using a maximum size of 256x256 for hardware 
cursors
[     7.878] (II) intel(0): Output VIRTUAL1 has no monitor section
[     7.878] (II) intel(0): Enabled output VIRTUAL1
[     7.878] (--) intel(0): Output HDMI1 using initial mode 1920x1080i 
on pipe 0
[     7.878] (==) intel(0): TearFree disabled
[     7.878] (==) intel(0): DPI set to (96, 96)
[     7.878] (II) Loading sub module "dri2"
[     7.878] (II) LoadModule: "dri2"
[     7.878] (II) Module "dri2" already built-in
[     7.878] (II) Loading sub module "present"
[     7.878] (II) LoadModule: "present"
[     7.878] (II) Module "present" already built-in
[     7.878] (II) UnloadModule: "modesetting"
[     7.878] (II) Unloading modesetting
[     7.878] (II) UnloadModule: "fbdev"
[     7.878] (II) Unloading fbdev
[     7.878] (II) UnloadSubModule: "fbdevhw"
[     7.878] (II) Unloading fbdevhw
[     7.878] (II) UnloadModule: "vesa"
[     7.878] (II) Unloading vesa
[     7.878] (==) Depth 24 pixmap format is 32 bpp
[     7.886] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) 
backend
[     7.886] (==) intel(0): Backing store enabled
[     7.886] (==) intel(0): Silken mouse enabled
[     7.887] (II) intel(0): HW Cursor enabled
[     7.887] (II) intel(0): RandR 1.2 enabled, ignore the following 
RandR disabled message.
[     7.888] (==) intel(0): DPMS enabled
[     7.888] (==) intel(0): Display hotplug detection enabled
[     7.889] (II) intel(0): [DRI2] Setup complete
[     7.889] (II) intel(0): [DRI2]   DRI driver: i965
[     7.889] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     7.889] (II) intel(0): direct rendering: DRI2 enabled
[     7.889] (II) intel(0): hardware support for Present enabled
[     7.889] (--) RandR disabled
[     7.914] (II) SELinux: Disabled on system
[     7.985] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     7.985] (II) AIGLX: enabled GLX_ARB_create_context
[     7.985] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     7.985] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     7.985] (II) AIGLX: enabled GLX_INTEL_swap_event
[     7.985] (II) AIGLX: enabled GLX_SGI_swap_control and 
GLX_MESA_swap_control
[     7.985] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     7.985] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     7.985] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     7.985] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer 
objects
[     7.985] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     7.986] (II) AIGLX: Loaded and initialized i965
[     7.986] (II) GLX: Initialized DRI2 GL provider for screen 0
[     8.020] (II) intel(0): switch to mode 1920x1080 at 60.0 on HDMI1 using 
pipe 0, position (0, 0), rotation normal, reflection none
[     8.020] (II) intel(0): Setting screen physical size to 508 x 285
[     8.259] (II) config/udev: Adding input device Power Button 
(/dev/input/event1)
[     8.268] (**) Power Button: Applying InputClass "evdev keyboard 
catchall"
[     8.268] (II) LoadModule: "evdev"
[     8.268] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.273] (II) Module evdev: vendor="X.Org Foundation"
[     8.273]     compiled for 1.18.1, module version = 2.10.1
[     8.273]     Module class: X.Org XInput Driver
[     8.273]     ABI class: X.Org XInput driver, version 22.1
[     8.273] (II) Using input driver 'evdev' for 'Power Button'
[     8.273] (**) Power Button: always reports core events
[     8.273] (**) evdev: Power Button: Device: "/dev/input/event1"
[     8.274] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.274] (--) evdev: Power Button: Found keys
[     8.274] (II) evdev: Power Button: Configuring as keyboard
[     8.274] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     8.274] (II) XINPUT: Adding extended input device "Power Button" 
(type: KEYBOARD, id 6)
[     8.274] (**) Option "xkb_rules" "evdev"
[     8.274] (**) Option "xkb_model" "pc105"
[     8.274] (**) Option "xkb_layout" "us"
[     8.275] (II) config/udev: Adding input device Video Bus 
(/dev/input/event2)
[     8.275] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.275] (II) Using input driver 'evdev' for 'Video Bus'
[     8.275] (**) Video Bus: always reports core events
[     8.275] (**) evdev: Video Bus: Device: "/dev/input/event2"
[     8.275] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.275] (--) evdev: Video Bus: Found keys
[     8.275] (II) evdev: Video Bus: Configuring as keyboard
[     8.275] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[     8.275] (II) XINPUT: Adding extended input device "Video Bus" 
(type: KEYBOARD, id 7)
[     8.275] (**) Option "xkb_rules" "evdev"
[     8.275] (**) Option "xkb_model" "pc105"
[     8.275] (**) Option "xkb_layout" "us"
[     8.277] (II) config/udev: Adding input device Power Button 
(/dev/input/event0)
[     8.277] (**) Power Button: Applying InputClass "evdev keyboard 
catchall"
[     8.277] (II) Using input driver 'evdev' for 'Power Button'
[     8.277] (**) Power Button: always reports core events
[     8.277] (**) evdev: Power Button: Device: "/dev/input/event0"
[     8.277] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.277] (--) evdev: Power Button: Found keys
[     8.277] (II) evdev: Power Button: Configuring as keyboard
[     8.277] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     8.277] (II) XINPUT: Adding extended input device "Power Button" 
(type: KEYBOARD, id 8)
[     8.277] (**) Option "xkb_rules" "evdev"
[     8.277] (**) Option "xkb_model" "pc105"
[     8.277] (**) Option "xkb_layout" "us"
[     8.279] (II) config/udev: Adding input device HDA Intel PCH 
HDMI/DP,pcm=3 (/dev/input/event5)
[     8.288] (II) No input driver specified, ignoring this device.
[     8.288] (II) This device may have been added with another device file.
[     8.288] (II) config/udev: Adding input device HDA Intel PCH 
HDMI/DP,pcm=7 (/dev/input/event6)
[     8.288] (II) No input driver specified, ignoring this device.
[     8.288] (II) This device may have been added with another device file.
[     8.289] (II) config/udev: Adding input device Wireless 
Keyboard/Mouse (/dev/input/event3)
[     8.289] (**) Wireless Keyboard/Mouse: Applying InputClass "evdev 
keyboard catchall"
[     8.289] (II) Using input driver 'evdev' for 'Wireless Keyboard/Mouse'
[     8.289] (**) Wireless Keyboard/Mouse: always reports core events
[     8.289] (**) evdev: Wireless Keyboard/Mouse: Device: 
"/dev/input/event3"
[     8.289] (--) evdev: Wireless Keyboard/Mouse: Vendor 0x99a Product 
0x7202
[     8.289] (--) evdev: Wireless Keyboard/Mouse: Found keys
[     8.290] (II) evdev: Wireless Keyboard/Mouse: Configuring as keyboard
[     8.290] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:099A:7202.0001/input/input3/event3"
[     8.290] (II) XINPUT: Adding extended input device "Wireless 
Keyboard/Mouse" (type: KEYBOARD, id 9)
[     8.290] (**) Option "xkb_rules" "evdev"
[     8.290] (**) Option "xkb_model" "pc105"
[     8.290] (**) Option "xkb_layout" "us"
[     8.291] (II) config/udev: Adding input device Wireless 
Keyboard/Mouse (/dev/input/event4)
[     8.291] (**) Wireless Keyboard/Mouse: Applying InputClass "evdev 
pointer catchall"
[     8.291] (**) Wireless Keyboard/Mouse: Applying InputClass "evdev 
keyboard catchall"
[     8.291] (II) Using input driver 'evdev' for 'Wireless Keyboard/Mouse'
[     8.291] (**) Wireless Keyboard/Mouse: always reports core events
[     8.291] (**) evdev: Wireless Keyboard/Mouse: Device: 
"/dev/input/event4"
[     8.291] (--) evdev: Wireless Keyboard/Mouse: Vendor 0x99a Product 
0x7202
[     8.291] (--) evdev: Wireless Keyboard/Mouse: Found 3 mouse buttons
[     8.291] (--) evdev: Wireless Keyboard/Mouse: Found scroll wheel(s)
[     8.291] (--) evdev: Wireless Keyboard/Mouse: Found relative axes
[     8.291] (--) evdev: Wireless Keyboard/Mouse: Found x and y relative 
axes
[     8.291] (--) evdev: Wireless Keyboard/Mouse: Found absolute axes
[     8.291] (II) evdev: Wireless Keyboard/Mouse: Forcing absolute x/y 
axes to exist.
[     8.291] (--) evdev: Wireless Keyboard/Mouse: Found keys
[     8.291] (II) evdev: Wireless Keyboard/Mouse: Configuring as mouse
[     8.300] (II) evdev: Wireless Keyboard/Mouse: Configuring as keyboard
[     8.300] (II) evdev: Wireless Keyboard/Mouse: Adding scrollwheel support
[     8.300] (**) evdev: Wireless Keyboard/Mouse: YAxisMapping: buttons 
4 and 5
[     8.300] (**) evdev: Wireless Keyboard/Mouse: EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.300] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:099A:7202.0002/input/input4/event4"
[     8.300] (II) XINPUT: Adding extended input device "Wireless 
Keyboard/Mouse" (type: KEYBOARD, id 10)
[     8.300] (**) Option "xkb_rules" "evdev"
[     8.300] (**) Option "xkb_model" "pc105"
[     8.300] (**) Option "xkb_layout" "us"
[     8.300] (II) evdev: Wireless Keyboard/Mouse: initialized for 
relative axes.
[     8.300] (WW) evdev: Wireless Keyboard/Mouse: ignoring absolute axes.
[     8.301] (**) Wireless Keyboard/Mouse: (accel) keeping acceleration 
scheme 1
[     8.301] (**) Wireless Keyboard/Mouse: (accel) acceleration profile 0
[     8.301] (**) Wireless Keyboard/Mouse: (accel) acceleration factor: 
2.000
[     8.301] (**) Wireless Keyboard/Mouse: (accel) acceleration threshold: 4
[     8.302] (II) config/udev: Adding input device Wireless 
Keyboard/Mouse (/dev/input/mouse0)
[     8.302] (II) No input driver specified, ignoring this device.
[     8.302] (II) This device may have been added with another device file.
[     8.332] (II) config/udev: Adding input device HDA Intel PCH 
HDMI/DP,pcm=7 (/dev/input/event6)
[     8.332] (II) No input driver specified, ignoring this device.
[     8.332] (II) This device may have been added with another device file.
[     8.332] (II) config/udev: Adding input device HDA Intel PCH 
HDMI/DP,pcm=3 (/dev/input/event5)
[     8.332] (II) No input driver specified, ignoring this device.
[     8.332] (II) This device may have been added with another device file.
[    36.789] (II) intel(0): EDID vendor "ONK", prod id 2930
[    36.789] (II) intel(0): Using EDID range info for horizontal sync
[    36.789] (II) intel(0): Using EDID range info for vertical refresh
[    36.789] (II) intel(0): Printing DDC gathered Modelines:
[    36.789] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 
2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    36.789] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1390 
1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    36.789] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 
2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    36.789] (II) intel(0): Modeline "720x480"x0.0   27.00  720 736 798 
858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    36.789] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 
1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    36.789] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 
800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    36.789] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 
1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    36.789] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 
1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    36.789] (II) intel(0): Modeline "1400x1050"x0.0  101.00  1400 1448 
1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[    36.789] (II) intel(0): Modeline "720x576"x0.0   27.00  720 732 796 
864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    36.789] (II) intel(0): Modeline "1440x480i"x0.0   27.00  1440 1478 
1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    36.789] (II) intel(0): Modeline "1440x240"x0.0   27.00  1440 1478 
1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz e)
[    36.789] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2448 
2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[    36.789] (II) intel(0): Modeline "1440x480"x0.0   54.00  1440 1472 
1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    36.789] (II) intel(0): Modeline "2880x240"x0.0   54.00  2880 2956 
3204 3432  240 244 247 262 -hsync -vsync (15.7 kHz e)
[    36.789] (II) intel(0): Modeline "2880x480i"x0.0   54.00  2880 2956 
3204 3432  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    36.790] (II) intel(0): Modeline "2880x576"x0.0  108.00  2880 2928 
3184 3456  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    36.790] (II) intel(0): Modeline "2880x480"x0.0  108.00  2880 2944 
3192 3432  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    36.790] (--) intel(0): HDMI max TMDS frequency 225000KHz
[    37.127] (II) intel(0): switch to mode 1920x1080 at 60.0 on HDMI1 using 
pipe 0, position (0, 0), rotation normal, reflection none
[    37.593] (--) intel(0): HDMI max TMDS frequency 225000KHz
[    37.794] (--) intel(0): HDMI max TMDS frequency 225000KHz
[    37.925] (--) intel(0): HDMI max TMDS frequency 225000KHz
>>>
>>> People here help quite readily if they have data to act upon.
>>>
>>> -- 
>>> Regards,
>>> Christopher Barry
>>> _______________________________________________
>>> xorg at lists.x.org: X.Org support
>>> Archives: http://lists.freedesktop.org/archives/xorg
>>> Info: https://lists.x.org/mailman/listinfo/xorg
>>> Your subscription address: %(user_address)s
>>
>> _______________________________________________
>> xorg at lists.x.org: X.Org support
>> Archives: http://lists.freedesktop.org/archives/xorg
>> Info: https://lists.x.org/mailman/listinfo/xorg
>> Your subscription address: %(user_address)s
>
>
>
> _______________________________________________
> xorg at lists.x.org: X.Org support
> Archives: http://lists.freedesktop.org/archives/xorg
> Info: https://lists.x.org/mailman/listinfo/xorg
> Your subscription address: %(user_address)s

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.x.org/archives/xorg/attachments/20160824/424dd068/attachment-0001.html>


More information about the xorg mailing list