<html> <head> <meta content="text/html; charset=utf-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> <div class="moz-cite-prefix">On 08/24/2016 08:10 AM, Jim Abernathy wrote: </div> <blockquote cite="mid:BLU437-SMTP3948A71576F047DD6BF8AFAEEA0@phx.gbl" type="cite"> On 08/24/2016 07:16 AM, Jim Abernathy wrote: <blockquote type="cite"> On 08/23/2016 10:33 AM, Christopher Barry wrote: <blockquote type="cite">On Tue, 23 Aug 2016 06:53:13 -0400 Jim Abernathy <a class="moz-txt-link-rfc2396E" href="mailto:jfabernathy@outlook.com"><jfabernathy@outlook.com></a> wrote: <blockquote type="cite">On 08/19/2016 10:17 AM, Jim Abernathy wrote: <blockquote type="cite">Not having much luck with the Distro forums on this issue so I thought I'd ask for advice here. I've been running Ubuntu 14.04.5 for some time on Intel Core i5 GFX without any issues. My display is HDMI from the PC to an Onkyo A/V receiver then to a Sony KDL-XBR6. When I try a fresh install of 16.04.1, I get a display that blanks out for 3-5 seconds at random times depending on what is being displayed at the time. I also have small abouts of video noise that is random horizontal lines about 1 pixel tall scattered through the page. I noticed that 14.04.05 uses X server 1.17.2 and 16.04.1 uses 1.18.3. When I do the command xrandr --verbose I see some small differences between 14.04 and 16.04, but it's things like 2 digits displayed instead of 1. i.e. 60.0 vs. 60.00. I'm only concerned with 1080P HD. I've tried this on different computers all with Intel GFX. same results. This does not occur on other monitors or TVs. I'd blame it on Sony and Onkyo if they didn't work so well with Windows, all versions, and ubuntu all versions except 16.04. It's almost like the auto detection software in the newest version of X is off just enough to make my display flaky. Kind of like the old analog CRT TVs that were sensitive to small tweaks to the horizontal and vertical adjustments. Any help would be appreciated. Jim A </blockquote> Can someone let me know where I can ask questions regarding problems with X?? I thought this forum would be the place? Jim A </blockquote> Jim, From the data above, I do not think it's possible to troubleshoot very effectively. It also seems like (to me anyway) that you have a fairly non-standard kind of configuration going on. If I understand it, you have a media-center type PC with an integrated Intel graphics card on an core i5 processor. Using an HDMI cable, you're plugging into an Onkyo A/V receiver (you do not mention the model), which in turn connects to a Sony KDL-XBR6 LCD TV. What happens when you connect your PC to a the Sony directly or to a normal PC LCD monitor? Does that work? Are you using an xorg configuration file, or are you allowing automatic setup via kernel mode switching? If you a have config file(s), what happens when you move them out of the way temporarily and allow automatic config? </blockquote> I'm using automatic setup on install. I played with the concept of creating an xorg.conf file. It's not as easy as it used to be. I tried without success to create an entry with a modeline statement but it messed things up so I abandoned that path of debug. <blockquote type="cite">What's in your /var/log/Xorg.0.log? </blockquote> I'll post the Xorg log later when I'm back at that PC. I looked at it to confirm no errors and which xorg configuration file it was using. I'll post one from my test system that has nothing but 16.04 installed plus current updates. </blockquote> Below is the part of dmesg related to Intel: jim@test:~$ dmesg | grep intel [ 1.504215] intel_idle: MWAIT substates: 0x21120 [ 1.504218] intel_idle: v0.4.1 model 0x2A [ 1.504221] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.891286] fb: switching to inteldrmfb from EFI VGA [ 3.190749] fbcon: inteldrmfb (fb0) is primary device [ 3.190970] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.280413] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 6.601171] intel_rapl: Found RAPL domain package [ 6.601179] intel_rapl: Found RAPL domain core [ 6.601183] intel_rapl: Found RAPL domain uncore [ 37.185938] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 37.185988] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun Here is the xorg.log </blockquote> Well it ended up attached as a file. I was having so many problems when I opened up email, file browser, and gedit with the log file that the display was blank for 15-20 seconds and normal for 1-2 that it mad it almost impossible to get the information. So the more stuff on the screen the more of a problem it is. I'm not on another computer and will paste in the xorg.log [ 7.791] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 7.791] X Protocol Version 11, Revision 0 [ 7.791] Build Operating System: Linux 3.13.0-92-generic x86_64 Ubuntu [ 7.791] Current Operating System: Linux test 4.4.0-34-generic #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 x86_64 [ 7.791] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic.efi.signed root=UUID=620eae70-f47f-4693-af7b-4e165863134d ro quiet splash vt.handoff=7 [ 7.791] Build Date: 22 July 2016 07:50:34AM [ 7.791] xorg-server 2:1.18.3-1ubuntu2.3 (For technical support please see <a class="moz-txt-link-freetext" href="http://www.ubuntu.com/support">http://www.ubuntu.com/support</a>) [ 7.791] Current version of pixman: 0.33.6 [ 7.791] Before reporting problems, check <a class="moz-txt-link-freetext" href="http://wiki.x.org">http://wiki.x.org</a> to make sure that you have the latest version. [ 7.791] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.791] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 24 07:59:18 2016 [ 7.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 7.792] (==) No Layout section. Using the first Screen section. [ 7.792] (==) No screen section available. Using defaults. [ 7.792] (**) |-->Screen "Default Screen Section" (0) [ 7.792] (**) | |-->Monitor "<default monitor>" [ 7.793] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.793] (==) Automatically adding devices [ 7.793] (==) Automatically enabling devices [ 7.793] (==) Automatically adding GPU devices [ 7.793] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 7.793] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 7.793] Entry deleted from font path. [ 7.793] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 7.794] Entry deleted from font path. [ 7.794] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 7.794] Entry deleted from font path. [ 7.794] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 7.794] Entry deleted from font path. [ 7.794] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 7.794] Entry deleted from font path. [ 7.794] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 7.794] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 7.794] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.794] (II) Loader magic: 0x5613949b6da0 [ 7.794] (II) Module ABI versions: [ 7.794] X.Org ANSI C Emulation: 0.4 [ 7.794] X.Org Video Driver: 20.0 [ 7.794] X.Org XInput driver : 22.1 [ 7.794] X.Org Server Extension : 9.0 [ 7.802] (++) using VT number 7 [ 7.802] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 7.803] (II) xfree86: Adding drm device (/dev/dri/card0) [ 7.828] (--) PCI:*(0:0:2:0) 8086:0106:8086:2044 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64 [ 7.828] (II) LoadModule: "glx" [ 7.837] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.865] (II) Module glx: vendor="X.Org Foundation" [ 7.865] compiled for 1.18.3, module version = 1.0.0 [ 7.865] ABI class: X.Org Server Extension, version 9.0 [ 7.865] (==) AIGLX enabled [ 7.865] (==) Matched intel as autoconfigured driver 0 [ 7.865] (==) Matched intel as autoconfigured driver 1 [ 7.865] (==) Matched modesetting as autoconfigured driver 2 [ 7.865] (==) Matched fbdev as autoconfigured driver 3 [ 7.865] (==) Matched vesa as autoconfigured driver 4 [ 7.865] (==) Assigned the driver to the xf86ConfigLayout [ 7.865] (II) LoadModule: "intel" [ 7.866] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 7.869] (II) Module intel: vendor="X.Org Foundation" [ 7.869] compiled for 1.18.1, module version = 2.99.917 [ 7.869] Module class: X.Org Video Driver [ 7.869] ABI class: X.Org Video Driver, version 20.0 [ 7.869] (II) LoadModule: "modesetting" [ 7.870] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 7.870] (II) Module modesetting: vendor="X.Org Foundation" [ 7.870] compiled for 1.18.3, module version = 1.18.3 [ 7.870] Module class: X.Org Video Driver [ 7.870] ABI class: X.Org Video Driver, version 20.0 [ 7.870] (II) LoadModule: "fbdev" [ 7.870] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 7.870] (II) Module fbdev: vendor="X.Org Foundation" [ 7.870] compiled for 1.18.1, module version = 0.4.4 [ 7.870] Module class: X.Org Video Driver [ 7.870] ABI class: X.Org Video Driver, version 20.0 [ 7.870] (II) LoadModule: "vesa" [ 7.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 7.871] (II) Module vesa: vendor="X.Org Foundation" [ 7.871] compiled for 1.18.1, module version = 2.3.4 [ 7.871] Module class: X.Org Video Driver [ 7.871] ABI class: X.Org Video Driver, version 20.0 [ 7.871] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 7.871] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 7.871] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 7.871] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 7.871] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 7.871] (II) FBDEV: driver for framebuffer: fbdev [ 7.871] (II) VESA: driver for VESA chipsets: vesa [ 7.873] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010 [ 7.873] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 (Timo Aaltonen <a class="moz-txt-link-rfc2396E" href="mailto:tjaalton@debian.org"><tjaalton@debian.org></a>) [ 7.873] (II) intel(0): SNA compiled for use with valgrind [ 7.874] (WW) Falling back to old probe method for modesetting [ 7.874] (WW) Falling back to old probe method for fbdev [ 7.874] (II) Loading sub module "fbdevhw" [ 7.874] (II) LoadModule: "fbdevhw" [ 7.874] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 7.874] (II) Module fbdevhw: vendor="X.Org Foundation" [ 7.874] compiled for 1.18.3, module version = 0.0.2 [ 7.874] ABI class: X.Org Video Driver, version 20.0 [ 7.874] (WW) Falling back to old probe method for vesa [ 7.875] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000 [ 7.875] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads [ 7.875] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 7.876] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 7.876] (==) intel(0): RGB weight 888 [ 7.876] (==) intel(0): Default visual is TrueColor [ 7.877] (II) intel(0): Output VGA1 has no monitor section [ 7.877] (II) intel(0): Enabled output VGA1 [ 7.877] (II) intel(0): Output HDMI1 has no monitor section [ 7.877] (II) intel(0): Enabled output HDMI1 [ 7.877] (II) intel(0): Output DP1 has no monitor section [ 7.877] (II) intel(0): Enabled output DP1 [ 7.877] (II) intel(0): Output HDMI2 has no monitor section [ 7.877] (II) intel(0): Enabled output HDMI2 [ 7.877] (II) intel(0): Output DP2 has no monitor section [ 7.877] (II) intel(0): Enabled output DP2 [ 7.877] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 7.878] (II) intel(0): Output VIRTUAL1 has no monitor section [ 7.878] (II) intel(0): Enabled output VIRTUAL1 [ 7.878] (--) intel(0): Output HDMI1 using initial mode 1920x1080i on pipe 0 [ 7.878] (==) intel(0): TearFree disabled [ 7.878] (==) intel(0): DPI set to (96, 96) [ 7.878] (II) Loading sub module "dri2" [ 7.878] (II) LoadModule: "dri2" [ 7.878] (II) Module "dri2" already built-in [ 7.878] (II) Loading sub module "present" [ 7.878] (II) LoadModule: "present" [ 7.878] (II) Module "present" already built-in [ 7.878] (II) UnloadModule: "modesetting" [ 7.878] (II) Unloading modesetting [ 7.878] (II) UnloadModule: "fbdev" [ 7.878] (II) Unloading fbdev [ 7.878] (II) UnloadSubModule: "fbdevhw" [ 7.878] (II) Unloading fbdevhw [ 7.878] (II) UnloadModule: "vesa" [ 7.878] (II) Unloading vesa [ 7.878] (==) Depth 24 pixmap format is 32 bpp [ 7.886] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend [ 7.886] (==) intel(0): Backing store enabled [ 7.886] (==) intel(0): Silken mouse enabled [ 7.887] (II) intel(0): HW Cursor enabled [ 7.887] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 7.888] (==) intel(0): DPMS enabled [ 7.888] (==) intel(0): Display hotplug detection enabled [ 7.889] (II) intel(0): [DRI2] Setup complete [ 7.889] (II) intel(0): [DRI2] DRI driver: i965 [ 7.889] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 7.889] (II) intel(0): direct rendering: DRI2 enabled [ 7.889] (II) intel(0): hardware support for Present enabled [ 7.889] (--) RandR disabled [ 7.914] (II) SELinux: Disabled on system [ 7.985] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 7.985] (II) AIGLX: enabled GLX_ARB_create_context [ 7.985] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 7.985] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 7.985] (II) AIGLX: enabled GLX_INTEL_swap_event [ 7.985] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 7.985] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 7.985] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 7.985] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 7.985] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 7.985] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 7.986] (II) AIGLX: Loaded and initialized i965 [ 7.986] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 8.020] (II) intel(0): switch to mode <a class="moz-txt-link-abbreviated" href="mailto:1920x1080@60.0">1920x1080@60.0</a> on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 8.020] (II) intel(0): Setting screen physical size to 508 x 285 [ 8.259] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 8.268] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 8.268] (II) LoadModule: "evdev" [ 8.268] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 8.273] (II) Module evdev: vendor="X.Org Foundation" [ 8.273] compiled for 1.18.1, module version = 2.10.1 [ 8.273] Module class: X.Org XInput Driver [ 8.273] ABI class: X.Org XInput driver, version 22.1 [ 8.273] (II) Using input driver 'evdev' for 'Power Button' [ 8.273] (**) Power Button: always reports core events [ 8.273] (**) evdev: Power Button: Device: "/dev/input/event1" [ 8.274] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 8.274] (--) evdev: Power Button: Found keys [ 8.274] (II) evdev: Power Button: Configuring as keyboard [ 8.274] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 8.274] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 8.274] (**) Option "xkb_rules" "evdev" [ 8.274] (**) Option "xkb_model" "pc105" [ 8.274] (**) Option "xkb_layout" "us" [ 8.275] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 8.275] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 8.275] (II) Using input driver 'evdev' for 'Video Bus' [ 8.275] (**) Video Bus: always reports core events [ 8.275] (**) evdev: Video Bus: Device: "/dev/input/event2" [ 8.275] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 8.275] (--) evdev: Video Bus: Found keys [ 8.275] (II) evdev: Video Bus: Configuring as keyboard [ 8.275] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2" [ 8.275] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 8.275] (**) Option "xkb_rules" "evdev" [ 8.275] (**) Option "xkb_model" "pc105" [ 8.275] (**) Option "xkb_layout" "us" [ 8.277] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 8.277] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 8.277] (II) Using input driver 'evdev' for 'Power Button' [ 8.277] (**) Power Button: always reports core events [ 8.277] (**) evdev: Power Button: Device: "/dev/input/event0" [ 8.277] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 8.277] (--) evdev: Power Button: Found keys [ 8.277] (II) evdev: Power Button: Configuring as keyboard [ 8.277] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 8.277] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 8.277] (**) Option "xkb_rules" "evdev" [ 8.277] (**) Option "xkb_model" "pc105" [ 8.277] (**) Option "xkb_layout" "us" [ 8.279] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5) [ 8.288] (II) No input driver specified, ignoring this device. [ 8.288] (II) This device may have been added with another device file. [ 8.288] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event6) [ 8.288] (II) No input driver specified, ignoring this device. [ 8.288] (II) This device may have been added with another device file. [ 8.289] (II) config/udev: Adding input device Wireless Keyboard/Mouse (/dev/input/event3) [ 8.289] (**) Wireless Keyboard/Mouse: Applying InputClass "evdev keyboard catchall" [ 8.289] (II) Using input driver 'evdev' for 'Wireless Keyboard/Mouse' [ 8.289] (**) Wireless Keyboard/Mouse: always reports core events [ 8.289] (**) evdev: Wireless Keyboard/Mouse: Device: "/dev/input/event3" [ 8.289] (--) evdev: Wireless Keyboard/Mouse: Vendor 0x99a Product 0x7202 [ 8.289] (--) evdev: Wireless Keyboard/Mouse: Found keys [ 8.290] (II) evdev: Wireless Keyboard/Mouse: Configuring as keyboard [ 8.290] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:099A:7202.0001/input/input3/event3" [ 8.290] (II) XINPUT: Adding extended input device "Wireless Keyboard/Mouse" (type: KEYBOARD, id 9) [ 8.290] (**) Option "xkb_rules" "evdev" [ 8.290] (**) Option "xkb_model" "pc105" [ 8.290] (**) Option "xkb_layout" "us" [ 8.291] (II) config/udev: Adding input device Wireless Keyboard/Mouse (/dev/input/event4) [ 8.291] (**) Wireless Keyboard/Mouse: Applying InputClass "evdev pointer catchall" [ 8.291] (**) Wireless Keyboard/Mouse: Applying InputClass "evdev keyboard catchall" [ 8.291] (II) Using input driver 'evdev' for 'Wireless Keyboard/Mouse' [ 8.291] (**) Wireless Keyboard/Mouse: always reports core events [ 8.291] (**) evdev: Wireless Keyboard/Mouse: Device: "/dev/input/event4" [ 8.291] (--) evdev: Wireless Keyboard/Mouse: Vendor 0x99a Product 0x7202 [ 8.291] (--) evdev: Wireless Keyboard/Mouse: Found 3 mouse buttons [ 8.291] (--) evdev: Wireless Keyboard/Mouse: Found scroll wheel(s) [ 8.291] (--) evdev: Wireless Keyboard/Mouse: Found relative axes [ 8.291] (--) evdev: Wireless Keyboard/Mouse: Found x and y relative axes [ 8.291] (--) evdev: Wireless Keyboard/Mouse: Found absolute axes [ 8.291] (II) evdev: Wireless Keyboard/Mouse: Forcing absolute x/y axes to exist. [ 8.291] (--) evdev: Wireless Keyboard/Mouse: Found keys [ 8.291] (II) evdev: Wireless Keyboard/Mouse: Configuring as mouse [ 8.300] (II) evdev: Wireless Keyboard/Mouse: Configuring as keyboard [ 8.300] (II) evdev: Wireless Keyboard/Mouse: Adding scrollwheel support [ 8.300] (**) evdev: Wireless Keyboard/Mouse: YAxisMapping: buttons 4 and 5 [ 8.300] (**) evdev: Wireless Keyboard/Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 8.300] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:099A:7202.0002/input/input4/event4" [ 8.300] (II) XINPUT: Adding extended input device "Wireless Keyboard/Mouse" (type: KEYBOARD, id 10) [ 8.300] (**) Option "xkb_rules" "evdev" [ 8.300] (**) Option "xkb_model" "pc105" [ 8.300] (**) Option "xkb_layout" "us" [ 8.300] (II) evdev: Wireless Keyboard/Mouse: initialized for relative axes. [ 8.300] (WW) evdev: Wireless Keyboard/Mouse: ignoring absolute axes. [ 8.301] (**) Wireless Keyboard/Mouse: (accel) keeping acceleration scheme 1 [ 8.301] (**) Wireless Keyboard/Mouse: (accel) acceleration profile 0 [ 8.301] (**) Wireless Keyboard/Mouse: (accel) acceleration factor: 2.000 [ 8.301] (**) Wireless Keyboard/Mouse: (accel) acceleration threshold: 4 [ 8.302] (II) config/udev: Adding input device Wireless Keyboard/Mouse (/dev/input/mouse0) [ 8.302] (II) No input driver specified, ignoring this device. [ 8.302] (II) This device may have been added with another device file. [ 8.332] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event6) [ 8.332] (II) No input driver specified, ignoring this device. [ 8.332] (II) This device may have been added with another device file. [ 8.332] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5) [ 8.332] (II) No input driver specified, ignoring this device. [ 8.332] (II) This device may have been added with another device file. [ 36.789] (II) intel(0): EDID vendor "ONK", prod id 2930 [ 36.789] (II) intel(0): Using EDID range info for horizontal sync [ 36.789] (II) intel(0): Using EDID range info for vertical refresh [ 36.789] (II) intel(0): Printing DDC gathered Modelines: [ 36.789] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 36.789] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 36.789] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 36.789] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 36.789] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 36.789] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 36.789] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 36.789] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 36.789] (II) intel(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [ 36.789] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 36.789] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 36.789] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e) [ 36.789] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 36.789] (II) intel(0): Modeline "1440x480"x0.0 54.00 1440 1472 1596 1716 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 36.789] (II) intel(0): Modeline "2880x240"x0.0 54.00 2880 2956 3204 3432 240 244 247 262 -hsync -vsync (15.7 kHz e) [ 36.789] (II) intel(0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 36.790] (II) intel(0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 36.790] (II) intel(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 36.790] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 37.127] (II) intel(0): switch to mode <a class="moz-txt-link-abbreviated" href="mailto:1920x1080@60.0">1920x1080@60.0</a> on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 37.593] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 37.794] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 37.925] (--) intel(0): HDMI max TMDS frequency 225000KHz <blockquote cite="mid:BLU437-SMTP3948A71576F047DD6BF8AFAEEA0@phx.gbl" type="cite"> <blockquote type="cite"> <blockquote type="cite"> People here help quite readily if they have data to act upon. -- Regards, Christopher Barry _______________________________________________ <a class="moz-txt-link-abbreviated" href="mailto:xorg@lists.x.org">xorg@lists.x.org</a>: X.Org support Archives: <a class="moz-txt-link-freetext" href="http://lists.freedesktop.org/archives/xorg">http://lists.freedesktop.org/archives/xorg</a> Info: <a class="moz-txt-link-freetext" href="https://lists.x.org/mailman/listinfo/xorg">https://lists.x.org/mailman/listinfo/xorg</a> Your subscription address: %(user_address)s </blockquote> _______________________________________________ <a class="moz-txt-link-abbreviated" href="mailto:xorg@lists.x.org">xorg@lists.x.org</a>: X.Org support Archives: <a class="moz-txt-link-freetext" href="http://lists.freedesktop.org/archives/xorg">http://lists.freedesktop.org/archives/xorg</a> Info: <a class="moz-txt-link-freetext" href="https://lists.x.org/mailman/listinfo/xorg">https://lists.x.org/mailman/listinfo/xorg</a> Your subscription address: %(user_address)s </blockquote> <fieldset class="mimeAttachmentHeader"></fieldset> <pre wrap="">_______________________________________________ <a class="moz-txt-link-abbreviated" href="mailto:xorg@lists.x.org">xorg@lists.x.org</a>: X.Org support Archives: <a class="moz-txt-link-freetext" href="http://lists.freedesktop.org/archives/xorg">http://lists.freedesktop.org/archives/xorg</a> Info: <a class="moz-txt-link-freetext" href="https://lists.x.org/mailman/listinfo/xorg">https://lists.x.org/mailman/listinfo/xorg</a> Your subscription address: %(user_address)s</pre> </blockquote> </body> </html>