XOrg in Debian10/Buster not usable with AMD Duron / Matrox G400
Markus Hiereth
post at hiereth.de
Thu Jul 18 09:11:48 UTC 2019
Hello Adam,
Adam Jackson <ajax at redhat.com> schrieb am 17. Juli 2019 um 17:06
> Try this again, but invoke the server as 'Xorg -verbose' so we can see
> the complete set of messages being printed.
I made some more tests but I am not able to identify what log entries
are decisive. Therefore complete logfiles attached here.
What I tried to find out is whether the X-server starts after creating
the MTRR storage areas using a bash command echo "base=.." >|
/proc/mtrr. It is not the case. But it reduces the number of error
messages. Thus, probably two mtrr storage areas are involved. I also
wonder about the meaning of the output for "count".
The logfiles of verbosity level 6 do not differ much to those of the
default level 3. In case You need more verbosity, tell it to me.
Attached You find
- a logging file of my bash operations, showing the commands and the
state of the MTRR storage area.
- a (commented) part of the dmesg record. Initially during boot. In
the middle lines that I regard as related to the graphic card. At
the end, there are entries related to systemd calls for xdm / the X
server as well as entries from my Xorg invocations.
- the Xorg logfiles resulting from the varios conditions before
invoking Xorg.
Best regards
Markus
-------------- next part --------------
root at lune:# cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
reg05: base=0x0e0000000 ( 3584MB), size= 64MB, count=1: write-combining
root at lune:# Xorg -logfile log1_0.txt -logverbose 6
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
Current Operating System: Linux lune 4.19.0-5-686-pae #1 SMP Debian 4.19.37-5 (2019-06-19) i686
Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686-pae root=/dev/sda7
Build Date: 05 March 2019 08:11:12PM
xorg-server 2:1.20.4-1 (https://www.debian.org/support)
Current version of pixman: 0.36.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "log1_0.txt", Time: Thu Jul 18 00:05:29 2019
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
error setting MTRR (base = 0x00000000dc000000, size = 0x02000000, type = 1) Invalid argument (22)
error setting MTRR (base = 0x00000000dc000000, size = 0x01000000, type = 1) Invalid argument (22)
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x69ccf2]
(EE) 1: linux-gate.so.1 (?+0x0) [0xb7ef8d87]
(EE) 2: ? (?+0x0) [0xc0000000]
(EE) unw_step failed: unspecified (general) error [-1]
(EE)
(EE) Segmentation fault at address 0xc0000000
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "log1_0.txt" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
Abgebrochen
root at lune:# cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
reg05: base=0x0e0000000 ( 3584MB), size= 64MB, count=1: write-combining
root at lune:# echo "base=0xdc000000
size=0x1000000 type=write-combining" >| /proc/mtrr
root at lune:# cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
reg01: base=0x0dc000000 ( 3520MB), size= 16MB, count=1: write-combining
reg05: base=0x0e0000000 ( 3584MB), size= 64MB, count=1: write-combining
root at lune:# Xorg -logfile log2_0.txt -logverbose 6
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
Current Operating System: Linux lune 4.19.0-5-686-pae #1 SMP Debian 4.19.37-5 (2019-06-19) i686
Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686-pae root=/dev/sda7
Build Date: 05 March 2019 08:11:12PM
xorg-server 2:1.20.4-1 (https://www.debian.org/support)
Current version of pixman: 0.36.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "log2_0.txt", Time: Thu Jul 18 00:07:23 2019
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
error setting MTRR (base = 0x00000000dc000000, size = 0x02000000, type = 1) Invalid argument (22)
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x5fecf2]
(EE) 1: linux-gate.so.1 (?+0x0) [0xb7ef9d87]
(EE) 2: ? (?+0x0) [0xc0000000]
(EE) unw_step failed: unspecified (general) error [-1]
(EE)
(EE) Segmentation fault at address 0xc0000000
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "log2_0.txt" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
Abgebrochen
cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
reg05: base=0x0e0000000 ( 3584MB), size= 64MB, count=1: write-combining
root at lune:# echo "base=0xdc000000
size=0x1000000 type=write-combining" >| /proc/mtrr
cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
reg01: base=0x0dc000000 ( 3520MB), size= 32MB, count=2: write-combining
reg05: base=0x0e0000000 ( 3584MB), size= 64MB, count=1: write-combining
root at lune:#
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
Current Operating System: Linux lune 4.19.0-5-686-pae #1 SMP Debian 4.19.37-5 (2019-06-19) i686
Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686-pae root=/dev/sda7
Build Date: 05 March 2019 08:11:12PM
xorg-server 2:1.20.4-1 (https://www.debian.org/support)
Current version of pixman: 0.36.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "log3_0.txt", Time: Thu Jul 18 00:35:07 2019
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
error setting MTRR (base = 0x00000000dc000000, size = 0x01000000, type = 1) Invalid argument (22)
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x670cf2]
(EE) 1: linux-gate.so.1 (?+0x0) [0xb7edfd87]
(EE) 2: ? (?+0x0) [0xc0000000]
(EE) unw_step failed: unspecified (general) error [-1]
(EE)
(EE) Segmentation fault at address 0xc0000000
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "log3_0.txt" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
Abgebrochen
-------------- next part --------------
[ 0.000000] Linux version 4.19.0-5-686-pae (debian-kernel at lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19)
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001fff8000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 2.3 present.
[ 0.000000] DMI: K7Upgrade-600 /K7Upgrade-600 , BIOS P1.50 04/08/2005
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 699.326 MHz processor
[ 0.009496] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.009514] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.009543] last_pfn = 0x1fff0 max_arch_pfn = 0x1000000
[ 0.009568] MTRR default type: uncachable
[ 0.009573] MTRR fixed ranges enabled:
[ 0.009581] 00000-9FFFF write-back
[ 0.009586] A0000-BFFFF uncachable
[ 0.009591] C0000-C7FFF write-protect
[ 0.009597] C8000-EFFFF uncachable
[ 0.009602] F0000-FFFFF write-protect
[ 0.009606] MTRR variable ranges enabled:
[ 0.009614] 0 base 000000000 mask FE0000000 write-back
[ 0.009619] 1 disabled
[ 0.009622] 2 disabled
[ 0.009626] 3 disabled
[ 0.009630] 4 disabled
[ 0.009636] 5 base 0E0000000 mask FFC000000 write-combining
[ 0.009640] 6 disabled
[ 0.009644] 7 disabled
[ 0.009962] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.041692] initial memory mapped: [mem 0x00000000-0x1affffff]
...
[ 0.644063] PCI host bridge to bus 0000:00
[ 0.644137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.644210] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.644281] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.644360] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.644439] pci_bus 0000:00: root bus resource [mem 0x20000000-0xffdfffff window]
[ 0.644518] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.644619] pci 0000:00:00.0: [1106:3189] type 00 class 0x060000
[ 0.644655] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
[ 0.645154] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[ 0.645259] pci 0000:00:01.0: supports D1
[ 0.645579] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[ 0.645617] pci 0000:00:0f.0: reg 0x10: [io 0xec00-0xec07]
[ 0.645633] pci 0000:00:0f.0: reg 0x14: [io 0xe800-0xe803]
[ 0.645649] pci 0000:00:0f.0: reg 0x18: [io 0xe400-0xe407]
[ 0.645664] pci 0000:00:0f.0: reg 0x1c: [io 0xe000-0xe003]
[ 0.645679] pci 0000:00:0f.0: reg 0x20: [io 0xdc00-0xdc0f]
[ 0.645694] pci 0000:00:0f.0: reg 0x24: [io 0xd800-0xd8ff]
[ 0.646064] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[ 0.646140] pci 0000:00:0f.1: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.646170] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.646254] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.646324] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.646395] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.646822] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.646891] pci 0000:00:10.0: reg 0x20: [io 0xc800-0xc81f]
[ 0.646960] pci 0000:00:10.0: supports D1 D2
[ 0.646967] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.647290] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.647359] pci 0000:00:10.1: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.647428] pci 0000:00:10.1: supports D1 D2
[ 0.647434] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.647751] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.647820] pci 0000:00:10.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.647891] pci 0000:00:10.2: supports D1 D2
[ 0.647897] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648216] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.648285] pci 0000:00:10.3: reg 0x20: [io 0xd400-0xd41f]
[ 0.648356] pci 0000:00:10.3: supports D1 D2
[ 0.648362] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.648689] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.648724] pci 0000:00:10.4: reg 0x10: [mem 0xdfffbe00-0xdfffbeff]
[ 0.648830] pci 0000:00:10.4: supports D1 D2
[ 0.648836] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.649248] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[ 0.649358] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.649816] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[ 0.649855] pci 0000:00:11.5: reg 0x10: [io 0xc400-0xc4ff]
[ 0.649970] pci 0000:00:11.5: supports D1 D2
[ 0.650291] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.650325] pci 0000:00:12.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.650342] pci 0000:00:12.0: reg 0x14: [mem 0xdfffbd00-0xdfffbdff]
[ 0.650441] pci 0000:00:12.0: supports D1 D2
[ 0.650447] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.650803] pci_bus 0000:01: extended config space not accessible
[ 0.650993] pci 0000:01:00.0: [102b:0525] type 00 class 0x030000
[ 0.651026] pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xddffffff pref]
[ 0.651041] pci 0000:01:00.0: reg 0x14: [mem 0xdfefc000-0xdfefffff]
[ 0.651055] pci 0000:01:00.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
[ 0.651091] pci 0000:01:00.0: reg 0x30: [mem 0xdfee0000-0xdfeeffff pref]
[ 0.651322] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.651399] pci 0000:00:01.0: bridge window [mem 0xdee00000-0xdfefffff]
[ 0.651408] pci 0000:00:01.0: bridge window [mem 0xdad00000-0xdecfffff pref]
...
[ 0.659076] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.659166] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.659247] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.659313] vgaarb: loaded
[ 0.659783] EDAC MC: Ver: 3.0.0
[ 0.660667] PCI: Using ACPI for IRQ routing
[ 0.660752] PCI: pci_cache_line_size set to 32 bytes
[ 0.660839] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.660845] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
...
[ 0.777304] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.781033] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.781165] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.781247] PCI: CLS 32 bytes, default 32
[ 0.781484] Unpacking initramfs...
[ 2.745726] Freeing initrd memory: 21016K
[ 2.745899] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.745971] software IO TLB: mapped [mem 0x16000000-0x1a000000] (64MB)
[ 2.748749] Initialise system trusted keyrings
...
(the following lines correspond to invocation of the X-server by systemd)
[ 56.043341] no MTRR for dc000000,2000000 found
[ 57.931430] no MTRR for dc000000,1000000 found
[ 59.205557] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 59.205580] [drm] No driver support for vblank timestamp query.
[ 59.205593] [drm] Initialized mga 3.2.1 20051102 for 0000:01:00.0 on minor 0
[ 71.674351] no MTRR for dc000000,2000000 found
[ 72.974469] no MTRR for dc000000,1000000 found
[ 74.317744] no MTRR for dc000000,2000000 found
[ 75.543223] no MTRR for dc000000,1000000 found
[ 76.542183] no MTRR for dc000000,2000000 found
[ 77.766395] no MTRR for dc000000,1000000 found
...
(the following line correspond to invoking Xorg with no change of mtrr)
[ 2217.416175] no MTRR for dc000000,2000000 found
[ 2218.631474] no MTRR for dc000000,1000000 found
...
(the following line correspond to invoking Xorg after adding mtrr)
[ 2331.601772] no MTRR for dc000000,2000000 found
(the following line correspond to invoking Xorg after two additions to mtrr)
[ 3997.246669] no MTRR for dc000000,1000000 found
-------------- next part --------------
[ 2217.455]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 2217.456] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[ 2217.457] Current Operating System: Linux lune 4.19.0-5-686-pae #1 SMP Debian 4.19.37-5 (2019-06-19) i686
[ 2217.457] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686-pae root=/dev/sda7
[ 2217.458] Build Date: 05 March 2019 08:11:12PM
[ 2217.458] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[ 2217.459] Current version of pixman: 0.36.0
[ 2217.459] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2217.460] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2217.463] (++) Log file: "log1_0.txt", Time: Thu Jul 18 00:05:29 2019
[ 2217.464] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2217.464] (==) No Layout section. Using the first Screen section.
[ 2217.464] (==) No screen section available. Using defaults.
[ 2217.465] (**) |-->Screen "Default Screen Section" (0)
[ 2217.465] (**) | |-->Monitor "<default monitor>"
[ 2217.466] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2217.467] (==) Automatically adding devices
[ 2217.467] (==) Automatically enabling devices
[ 2217.467] (==) Automatically adding GPU devices
[ 2217.467] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2217.467] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2217.467] Entry deleted from font path.
[ 2217.467] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 2217.467] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2217.467] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2217.467] (II) Loader magic: 0x76a740
[ 2217.467] (II) Module ABI versions:
[ 2217.467] X.Org ANSI C Emulation: 0.4
[ 2217.467] X.Org Video Driver: 24.0
[ 2217.467] X.Org XInput driver : 24.1
[ 2217.467] X.Org Server Extension : 10.0
[ 2217.473] (--) using VT number 3
[ 2217.473] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 2217.476] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2217.487] (--) PCI:*(1 at 0:0:0) 102b:0525:102b:19d8 rev 4, Mem @ 0xdc000000/33554432, 0xdfefc000/16384, 0xdf000000/8388608, BIOS @ 0x????????/131072
[ 2217.487] (II) LoadModule: "glx"
[ 2217.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2217.496] (II) Module glx: vendor="X.Org Foundation"
[ 2217.496] compiled for 1.20.4, module version = 1.0.0
[ 2217.496] ABI class: X.Org Server Extension, version 10.0
[ 2217.496] (==) Matched mga as autoconfigured driver 0
[ 2217.496] (==) Matched modesetting as autoconfigured driver 1
[ 2217.496] (==) Matched fbdev as autoconfigured driver 2
[ 2217.496] (==) Matched vesa as autoconfigured driver 3
[ 2217.496] (==) Assigned the driver to the xf86ConfigLayout
[ 2217.496] (II) LoadModule: "mga"
[ 2217.497] (II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
[ 2217.497] (II) Module mga: vendor="X.Org Foundation"
[ 2217.498] compiled for 1.20.3, module version = 2.0.0
[ 2217.498] Module class: X.Org Video Driver
[ 2217.498] ABI class: X.Org Video Driver, version 24.0
[ 2217.498] (II) LoadModule: "modesetting"
[ 2217.498] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2217.499] (II) Module modesetting: vendor="X.Org Foundation"
[ 2217.499] compiled for 1.20.4, module version = 1.20.4
[ 2217.499] Module class: X.Org Video Driver
[ 2217.499] ABI class: X.Org Video Driver, version 24.0
[ 2217.499] (II) LoadModule: "fbdev"
[ 2217.500] (WW) Warning, couldn't open module fbdev
[ 2217.500] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2217.500] (II) LoadModule: "vesa"
[ 2217.501] (WW) Warning, couldn't open module vesa
[ 2217.501] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2217.501] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200 eW3 Nuvoton,
mgag200eH, mgag200eH3, mgag400, mgag550
[ 2217.502] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2217.510] (WW) Falling back to old probe method for modesetting
[ 2217.511] (II) Loading sub module "vgahw"
[ 2217.511] (II) LoadModule: "vgahw"
[ 2217.511] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2217.512] (II) Module vgahw: vendor="X.Org Foundation"
[ 2217.512] compiled for 1.20.4, module version = 0.1.0
[ 2217.512] ABI class: X.Org Video Driver, version 24.0
[ 2217.512] (--) MGA(0): Chipset: "mgag400" (G400)
[ 2217.517] xf86TokenToOptinfo: table is NULL
[ 2217.517] xf86TokenToOptinfo: table is NULL
[ 2217.517] (==) MGA(0): Using HW cursor
[ 2217.517] (--) MGA(0): Linear framebuffer at 0xDC000000
[ 2217.517] (--) MGA(0): MMIO registers at 0xDFEFC000
[ 2217.518] (--) MGA(0): Pseudo-DMA transfer window at 0xDF000000
[ 2217.519] (II) MGA(0): MAPPED Framebuffer DC000000 2000000 to B5265000.
[ 2217.521] (II) MGA(0): UNMAPPING framebuffer 0xB5265000, 0x2000000.
[ 2217.530] (II) MGA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2217.530] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
[ 2217.530] (==) MGA(0): RGB weight 888
[ 2217.530] (==) MGA(0): Using AGP 1x mode
[ 2217.530] (==) MGA(0): Using EXA acceleration
[ 2217.530] (II) Loading sub module "exa"
[ 2217.531] (II) LoadModule: "exa"
[ 2217.531] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2217.532] (II) Module exa: vendor="X.Org Foundation"
[ 2217.532] compiled for 1.20.4, module version = 2.6.0
[ 2217.532] ABI class: X.Org Video Driver, version 24.0
[ 2217.537] (--) MGA(0): Video BIOS info block at offset 0x07A80
[ 2217.537] (==) MGA(0): VideoRAM: 16384 kByte
[ 2217.537] (II) Loading sub module "ddc"
[ 2217.537] (II) LoadModule: "ddc"
[ 2217.537] (II) Module "ddc" already built-in
[ 2217.537] (II) Loading sub module "i2c"
[ 2217.537] (II) LoadModule: "i2c"
[ 2217.537] (II) Module "i2c" already built-in
[ 2217.538] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B6249000.
[ 2217.539] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 2217.638] (II) MGA(0): I2C bus "DDC P1" initialized.
[ 2217.639] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
[ 2218.433] (--) MGA(0): No DDC signal
[ 2218.433] (II) Loading sub module "vbe"
[ 2218.433] (II) LoadModule: "vbe"
[ 2218.434] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2218.434] (II) Module vbe: vendor="X.Org Foundation"
[ 2218.435] compiled for 1.20.4, module version = 1.1.0
[ 2218.435] ABI class: X.Org Video Driver, version 24.0
[ 2218.435] (II) Loading sub module "int10"
[ 2218.435] (II) LoadModule: "int10"
[ 2218.435] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 2218.436] (II) Module int10: vendor="X.Org Foundation"
[ 2218.436] compiled for 1.20.4, module version = 1.0.0
[ 2218.436] ABI class: X.Org Video Driver, version 24.0
[ 2218.436] (II) MGA(0): initializing int10
[ 2218.439] (II) MGA(0): Primary V_BIOS segment is: 0xc000
[ 2218.439] (II) MGA(0): VESA BIOS detected
[ 2218.439] (II) MGA(0): VbeVersion is 512, OemStringPtr is 0xc0006cca,
OemVendorNamePtr is 0xc0006cdf, OemProductNamePtr is 0xc0006ce6,
OemProductRevPtr is 0xc0006cf2
[ 2218.440] (II) MGA(0): VESA VBE Version 2.0
[ 2218.440] (II) MGA(0): VESA VBE Total Mem: 16384 kB
[ 2218.440] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
[ 2218.440] (II) MGA(0): VESA VBE OEM Software Rev: 1.5
[ 2218.440] (II) MGA(0): VESA VBE OEM Vendor: Matrox
[ 2218.440] (II) MGA(0): VESA VBE OEM Product: Matrox G400
[ 2218.440] (II) MGA(0): VESA VBE OEM Product Rev: 00
[ 2218.583] (II) MGA(0): VESA VBE DDC supported
[ 2218.583] (II) MGA(0): VESA VBE DDC Level none
[ 2218.583] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
[ 2218.726] (II) MGA(0): VESA VBE DDC read failed
[ 2218.737] (II) MGA(0): UNMAPPING framebuffer 0xB6249000, 0x1000000.
[ 2218.740] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2218.740] (==) MGA(0): Min pixel clock is 17 MHz
[ 2218.740] (--) MGA(0): Max pixel clock is 300 MHz
[ 2218.740] (II) MGA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[ 2218.740] (II) MGA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[ 2218.740] (II) MGA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[ 2218.740] (WW) MGA(0): Unable to estimate virtual size
[ 2218.740] (II) MGA(0): Clock range: 17.75 to 300.00 MHz
[ 2218.740] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
[ 2218.740] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[ 2218.740] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
[ 2218.740] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[ 2218.740] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
[ 2218.740] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
[ 2218.740] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 2218.740] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 2218.740] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 2218.740] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 2218.741] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 2218.741] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 2218.741] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
[ 2218.742] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[ 2218.742] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[ 2218.742] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[ 2218.742] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[ 2218.742] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 2218.742] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range)
[ 2218.742] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2218.742] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[ 2218.743] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "832x624" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "416x312" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2218.744] (II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[ 2218.744] (II) MGA(0): Not using default mode "1360x768" (mode clock too high)
[ 2218.745] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1440x900" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "720x450" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1600x1024" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "800x512" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2218.745] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[ 2218.746] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[ 2218.746] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[ 2218.747] (II) MGA(0): Not using default mode "960x540" (monitor doesn't support reduced blanking)
[ 2218.747] (II) MGA(0): Not using default mode "1024x576" (monitor doesn't support reduced blanking)
[ 2218.747] (II) MGA(0): Not using default mode "1280x720" (monitor doesn't support reduced blanking)
[ 2218.747] (II) MGA(0): Not using default mode "1280x720" (mode clock too high)
[ 2218.747] (II) MGA(0): Not using default mode "1368x768" (monitor doesn't support reduced blanking)
[ 2218.747] (II) MGA(0): Not using default mode "1368x768" (mode clock too high)
[ 2218.747] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[ 2218.747] (II) MGA(0): Not using default mode "2560x1440" (unknown reason)
[ 2218.747] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[ 2218.748] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 2218.748] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[ 2218.748] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[ 2218.748] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[ 2218.748] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2218.748] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2218.748] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "1920x1080" (unknown reason)
[ 2218.748] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 2218.748] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[ 2218.748] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[ 2218.748] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 2218.748] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 2218.748] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2218.748] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2218.749] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[ 2218.749] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2218.749] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[ 2218.749] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2218.749] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 2218.749] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 2218.750] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 2218.750] (II) MGA(0): Not using default mode "2560x1600" (unknown reason)
[ 2218.750] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2218.750] (II) MGA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
[ 2218.750] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2218.750] (II) MGA(0): Virtual size is 1024x768 (pitch 1024)
[ 2218.750] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 2218.750] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 2218.750] (**) MGA(0): *Default mode "1024x576": 46.5 MHz, 35.9 kHz, 59.9 Hz
[ 2218.750] (II) MGA(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz zd)
[ 2218.750] (**) MGA(0): *Default mode "960x540": 40.8 MHz, 33.5 kHz, 59.6 Hz
[ 2218.750] (II) MGA(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 2218.751] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 2218.751] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 2218.751] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "684x384": 42.6 MHz, 47.8 kHz, 59.9 Hz (D)
[ 2218.751] (II) MGA(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 2218.751] (II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 2218.751] (II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "640x360": 37.2 MHz, 44.8 kHz, 59.9 Hz (D)
[ 2218.751] (II) MGA(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 2218.751] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "512x288": 23.2 MHz, 35.9 kHz, 60.0 Hz (D)
[ 2218.751] (II) MGA(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz zd)
[ 2218.751] (**) MGA(0): *Default mode "512x288": 21.0 MHz, 35.5 kHz, 59.9 Hz (D)
[ 2218.751] (II) MGA(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz zd)
[ 2218.752] (**) MGA(0): *Default mode "480x270": 18.6 MHz, 33.3 kHz, 59.8 Hz (D)
[ 2218.752] (II) MGA(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz zd)
[ 2218.752] (**) MGA(0): *Default mode "480x270": 20.4 MHz, 33.5 kHz, 59.6 Hz (D)
[ 2218.752] (II) MGA(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz zd)
[ 2218.752] (**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 2218.752] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 2218.752] (**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 2218.752] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 2218.752] (==) MGA(0): DPI set to (96, 96)
[ 2218.752] (II) MGA(0): YDstOrg is set to 0
[ 2218.752] (II) Loading sub module "fb"
[ 2218.752] (II) LoadModule: "fb"
[ 2218.753] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2218.754] (II) Module fb: vendor="X.Org Foundation"
[ 2218.754] compiled for 1.20.4, module version = 1.0.0
[ 2218.754] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2218.754] (II) Loading sub module "ramdac"
[ 2218.754] (II) LoadModule: "ramdac"
[ 2218.754] (II) Module "ramdac" already built-in
[ 2218.754] (II) UnloadModule: "modesetting"
[ 2218.754] (II) Unloading modesetting
[ 2218.755] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B622D000.
[ 2218.756] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 2218.850] (--) MGA(0): 16 DWORD fifo
[ 2218.864] (==) MGA(0): Default visual is TrueColor
[ 2218.864] (II) MGA(0): [drm] bpp: 32 depth: 24
[ 2218.864] (II) MGA(0): [drm] Sarea 2200+664: 2864
[ 2218.864] drmOpenDevice: node name is /dev/dri/card0
[ 2218.865] drmOpenDevice: open result is 14, (OK)
[ 2218.865] drmOpenDevice: node name is /dev/dri/card0
[ 2218.865] drmOpenDevice: open result is 14, (OK)
[ 2218.865] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 2218.865] drmOpenDevice: node name is /dev/dri/card0
[ 2218.865] drmOpenDevice: open result is 14, (OK)
[ 2218.865] drmOpenByBusid: drmOpenMinor returns 14
[ 2218.865] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 2218.865] (II) [drm] DRM interface version 1.4
[ 2218.866] (II) [drm] DRM open master succeeded.
[ 2218.866] (II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
[ 2218.866] (II) MGA(0): [drm] framebuffer handle = 0xdc000000
[ 2218.866] (II) MGA(0): [drm] added 1 reserved context for kernel
[ 2218.866] (II) MGA(0): X context handle = 0x1
[ 2218.866] (EE) MGA(0): [drm] failed to setup DRM signal handler
[ 2218.866] (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
[ 2218.867] (II) MGA(0): X 1024 Y 768 bpp 32
[ 2218.867] (II) MGA(0): Start at 0xb622d000, size ffec00, osb 301000
[ 2218.867] (II) EXA(0): Offscreen pixmap area of 13622272 bytes
[ 2218.867] (II) EXA(0): Driver registered support for the following operations:
[ 2218.867] (II) Solid
[ 2218.867] (II) Copy
[ 2218.867] (II) Composite (RENDER acceleration)
[ 2218.867] (II) UploadToScreen
[ 2218.867] (==) MGA(0): Backing store enabled
[ 2218.867] (==) MGA(0): Silken mouse enabled
[ 2218.868] (==) MGA(0): DPMS enabled
[ 2218.868] (II) MGA(0): Using overlay video
[ 2218.868] (WW) MGA(0): Direct rendering disabled
[ 2218.868] (II) Initializing extension Generic Event Extension
[ 2218.870] (II) Initializing extension SHAPE
[ 2218.871] (II) Initializing extension MIT-SHM
[ 2218.872] (II) Initializing extension XInputExtension
[ 2218.874] (II) Initializing extension XTEST
[ 2218.875] (II) Initializing extension BIG-REQUESTS
[ 2218.877] (II) Initializing extension SYNC
[ 2218.878] (II) Initializing extension XKEYBOARD
[ 2218.879] (II) Initializing extension XC-MISC
[ 2218.880] (II) Initializing extension SECURITY
[ 2218.882] (II) Initializing extension XFIXES
[ 2218.883] (II) Initializing extension RENDER
[ 2218.884] (II) Initializing extension RANDR
[ 2218.887] (II) Initializing extension COMPOSITE
[ 2218.888] (II) Initializing extension DAMAGE
[ 2218.889] (II) Initializing extension MIT-SCREEN-SAVER
[ 2218.891] (II) Initializing extension DOUBLE-BUFFER
[ 2218.892] (II) Initializing extension RECORD
[ 2218.893] (II) Initializing extension DPMS
[ 2218.894] (II) Initializing extension Present
[ 2218.896] (II) Initializing extension DRI3
[ 2218.896] (II) Initializing extension X-Resource
[ 2218.897] (II) Initializing extension XVideo
[ 2218.898] (II) Initializing extension XVideo-MotionCompensation
[ 2218.898] (II) Initializing extension SELinux
[ 2218.898] (II) SELinux: Disabled on system
[ 2218.898] (II) Initializing extension GLX
[ 2218.900] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2219.094] (II) IGLX: Loaded and initialized swrast
[ 2219.095] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2219.095] (II) Initializing extension XFree86-VidModeExtension
[ 2219.096] (II) Initializing extension XFree86-DGA
[ 2219.097] (II) Initializing extension XFree86-DRI
[ 2219.099] (II) Initializing extension DRI2
[ 2219.305] (II) XKB: Reusing cached keymap
[ 2219.373] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 2219.373] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2219.373] (II) LoadModule: "evdev"
[ 2219.374] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2219.376] (II) Module evdev: vendor="X.Org Foundation"
[ 2219.376] compiled for 1.20.1, module version = 2.10.6
[ 2219.376] Module class: X.Org XInput Driver
[ 2219.376] ABI class: X.Org XInput driver, version 24.1
[ 2219.376] (II) Using input driver 'evdev' for 'Power Button'
[ 2219.376] Option "_source" "server/udev"
[ 2219.376] Option "name" "Power Button"
[ 2219.376] Option "path" "/dev/input/event4"
[ 2219.376] Option "device" "/dev/input/event4"
[ 2219.376] Option "major" "13"
[ 2219.376] Option "minor" "68"
[ 2219.377] Option "xkb_layout" "de"
[ 2219.377] Option "xkb_model" "pc105"
[ 2219.377] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 2219.377] Option "driver" "evdev"
[ 2219.377] (**) Power Button: always reports core events
[ 2219.377] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 2219.378] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2219.378] (--) evdev: Power Button: Found keys
[ 2219.378] (II) evdev: Power Button: Configuring as keyboard
[ 2219.378] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 2219.378] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2219.378] (**) Option "xkb_rules" "evdev"
[ 2219.378] (**) Option "xkb_model" "pc105"
[ 2219.378] (**) Option "xkb_layout" "de"
[ 2219.514] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2219.515] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2219.515] (II) Using input driver 'evdev' for 'Power Button'
[ 2219.515] Option "_source" "server/udev"
[ 2219.515] Option "name" "Power Button"
[ 2219.515] Option "path" "/dev/input/event2"
[ 2219.515] Option "device" "/dev/input/event2"
[ 2219.515] Option "major" "13"
[ 2219.515] Option "minor" "66"
[ 2219.515] Option "xkb_layout" "de"
[ 2219.515] Option "xkb_model" "pc105"
[ 2219.515] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 2219.515] Option "driver" "evdev"
[ 2219.515] (**) Power Button: always reports core events
[ 2219.515] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2219.515] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2219.515] (--) evdev: Power Button: Found keys
[ 2219.515] (II) evdev: Power Button: Configuring as keyboard
[ 2219.516] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 2219.516] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2219.516] (**) Option "xkb_rules" "evdev"
[ 2219.516] (**) Option "xkb_model" "pc105"
[ 2219.516] (**) Option "xkb_layout" "de"
[ 2219.516] (II) XKB: Reusing cached keymap
[ 2219.521] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 2219.522] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2219.522] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2219.522] Option "_source" "server/udev"
[ 2219.522] Option "name" "Sleep Button"
[ 2219.522] Option "path" "/dev/input/event3"
[ 2219.522] Option "device" "/dev/input/event3"
[ 2219.522] Option "major" "13"
[ 2219.522] Option "minor" "67"
[ 2219.522] Option "xkb_layout" "de"
[ 2219.522] Option "xkb_model" "pc105"
[ 2219.522] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 2219.522] Option "driver" "evdev"
[ 2219.522] (**) Sleep Button: always reports core events
[ 2219.522] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 2219.523] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2219.523] (--) evdev: Sleep Button: Found keys
[ 2219.523] (II) evdev: Sleep Button: Configuring as keyboard
[ 2219.523] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 2219.523] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2219.523] (**) Option "xkb_rules" "evdev"
[ 2219.523] (**) Option "xkb_model" "pc105"
[ 2219.523] (**) Option "xkb_layout" "de"
[ 2219.523] (II) XKB: Reusing cached keymap
[ 2219.529] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2219.530] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2219.530] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2219.530] Option "_source" "server/udev"
[ 2219.530] Option "name" "AT Translated Set 2 keyboard"
[ 2219.530] Option "path" "/dev/input/event0"
[ 2219.530] Option "device" "/dev/input/event0"
[ 2219.530] Option "major" "13"
[ 2219.530] Option "minor" "64"
[ 2219.530] Option "xkb_layout" "de"
[ 2219.530] Option "xkb_model" "pc105"
[ 2219.530] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2219.530] Option "driver" "evdev"
[ 2219.530] (**) AT Translated Set 2 keyboard: always reports core events
[ 2219.530] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2219.530] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2219.531] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2219.531] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2219.531] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2219.531] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2219.531] (**) Option "xkb_rules" "evdev"
[ 2219.531] (**) Option "xkb_model" "pc105"
[ 2219.531] (**) Option "xkb_layout" "de"
[ 2219.531] (II) XKB: Reusing cached keymap
[ 2219.536] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[ 2219.536] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 2219.536] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 2219.537] Option "_source" "server/udev"
[ 2219.537] Option "name" "ImExPS/2 Generic Explorer Mouse"
[ 2219.537] Option "path" "/dev/input/event1"
[ 2219.537] Option "device" "/dev/input/event1"
[ 2219.537] Option "major" "13"
[ 2219.537] Option "minor" "65"
[ 2219.537] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 2219.537] Option "driver" "evdev"
[ 2219.537] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 2219.537] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[ 2219.538] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 2219.538] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 2219.538] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 2219.538] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 2219.538] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 2219.538] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 2219.538] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 2219.538] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 2219.538] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2219.538] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 2219.538] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 2219.539] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 2219.540] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 2219.540] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 2219.540] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 2219.540] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 2219.543] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 2219.543] (II) No input driver specified, ignoring this device.
[ 2219.544] (II) This device may have been added with another device file.
[ 2219.547] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 2219.547] (II) No input driver specified, ignoring this device.
[ 2219.547] (II) This device may have been added with another device file.
[ 2219.582] (EE)
[ 2219.583] (EE) Backtrace:
[ 2219.584] (EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x69ccf2]
[ 2219.588] (EE) 1: linux-gate.so.1 (?+0x0) [0xb7ef8d87]
[ 2219.591] (EE) 2: ? (?+0x0) [0xc0000000]
[ 2219.592] (EE) unw_step failed: unspecified (general) error [-1]
[ 2219.592] (EE)
[ 2219.593] (EE) Segmentation fault at address 0xc0000000
[ 2219.594] (EE)
Fatal server error:
[ 2219.594] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2219.595] (EE)
[ 2219.595] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2219.596] (EE) Please also check the log file at "log1_0.txt" for additional information.
[ 2219.596] (EE)
[ 2219.617] (EE) Server terminated with error (1). Closing log file.
-------------- next part --------------
[ 2331.640]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 2331.641] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[ 2331.641] Current Operating System: Linux lune 4.19.0-5-686-pae #1 SMP Debian 4.19.37-5 (2019-06-19) i686
[ 2331.642] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686-pae root=/dev/sda7
[ 2331.642] Build Date: 05 March 2019 08:11:12PM
[ 2331.643] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[ 2331.643] Current version of pixman: 0.36.0
[ 2331.644] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2331.644] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2331.647] (++) Log file: "log2_0.txt", Time: Thu Jul 18 00:07:23 2019
[ 2331.648] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2331.649] (==) No Layout section. Using the first Screen section.
[ 2331.649] (==) No screen section available. Using defaults.
[ 2331.649] (**) |-->Screen "Default Screen Section" (0)
[ 2331.649] (**) | |-->Monitor "<default monitor>"
[ 2331.651] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2331.651] (==) Automatically adding devices
[ 2331.651] (==) Automatically enabling devices
[ 2331.651] (==) Automatically adding GPU devices
[ 2331.651] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2331.651] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2331.651] Entry deleted from font path.
[ 2331.652] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 2331.652] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2331.652] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2331.652] (II) Loader magic: 0x6cc740
[ 2331.652] (II) Module ABI versions:
[ 2331.652] X.Org ANSI C Emulation: 0.4
[ 2331.652] X.Org Video Driver: 24.0
[ 2331.652] X.Org XInput driver : 24.1
[ 2331.652] X.Org Server Extension : 10.0
[ 2331.658] (--) using VT number 3
[ 2331.658] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 2331.660] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2331.671] (--) PCI:*(1 at 0:0:0) 102b:0525:102b:19d8 rev 4, Mem @ 0xdc000000/33554432, 0xdfefc000/16384, 0xdf000000/8388608, BIOS @ 0x????????/131072
[ 2331.672] (II) LoadModule: "glx"
[ 2331.673] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2331.680] (II) Module glx: vendor="X.Org Foundation"
[ 2331.680] compiled for 1.20.4, module version = 1.0.0
[ 2331.680] ABI class: X.Org Server Extension, version 10.0
[ 2331.680] (==) Matched mga as autoconfigured driver 0
[ 2331.680] (==) Matched modesetting as autoconfigured driver 1
[ 2331.680] (==) Matched fbdev as autoconfigured driver 2
[ 2331.680] (==) Matched vesa as autoconfigured driver 3
[ 2331.680] (==) Assigned the driver to the xf86ConfigLayout
[ 2331.680] (II) LoadModule: "mga"
[ 2331.681] (II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
[ 2331.682] (II) Module mga: vendor="X.Org Foundation"
[ 2331.682] compiled for 1.20.3, module version = 2.0.0
[ 2331.682] Module class: X.Org Video Driver
[ 2331.682] ABI class: X.Org Video Driver, version 24.0
[ 2331.682] (II) LoadModule: "modesetting"
[ 2331.683] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2331.683] (II) Module modesetting: vendor="X.Org Foundation"
[ 2331.683] compiled for 1.20.4, module version = 1.20.4
[ 2331.683] Module class: X.Org Video Driver
[ 2331.684] ABI class: X.Org Video Driver, version 24.0
[ 2331.684] (II) LoadModule: "fbdev"
[ 2331.685] (WW) Warning, couldn't open module fbdev
[ 2331.685] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2331.685] (II) LoadModule: "vesa"
[ 2331.686] (WW) Warning, couldn't open module vesa
[ 2331.686] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2331.686] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200 eW3 Nuvoton,
mgag200eH, mgag200eH3, mgag400, mgag550
[ 2331.687] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2331.694] (WW) Falling back to old probe method for modesetting
[ 2331.695] (II) Loading sub module "vgahw"
[ 2331.695] (II) LoadModule: "vgahw"
[ 2331.695] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2331.696] (II) Module vgahw: vendor="X.Org Foundation"
[ 2331.696] compiled for 1.20.4, module version = 0.1.0
[ 2331.696] ABI class: X.Org Video Driver, version 24.0
[ 2331.696] (--) MGA(0): Chipset: "mgag400" (G400)
[ 2331.701] xf86TokenToOptinfo: table is NULL
[ 2331.701] xf86TokenToOptinfo: table is NULL
[ 2331.701] (==) MGA(0): Using HW cursor
[ 2331.701] (--) MGA(0): Linear framebuffer at 0xDC000000
[ 2331.702] (--) MGA(0): MMIO registers at 0xDFEFC000
[ 2331.702] (--) MGA(0): Pseudo-DMA transfer window at 0xDF000000
[ 2331.703] (II) MGA(0): MAPPED Framebuffer DC000000 2000000 to B5266000.
[ 2331.705] (II) MGA(0): UNMAPPING framebuffer 0xB5266000, 0x2000000.
[ 2331.714] (II) MGA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2331.714] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
[ 2331.714] (==) MGA(0): RGB weight 888
[ 2331.714] (==) MGA(0): Using AGP 1x mode
[ 2331.714] (==) MGA(0): Using EXA acceleration
[ 2331.714] (II) Loading sub module "exa"
[ 2331.714] (II) LoadModule: "exa"
[ 2331.715] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2331.715] (II) Module exa: vendor="X.Org Foundation"
[ 2331.715] compiled for 1.20.4, module version = 2.6.0
[ 2331.715] ABI class: X.Org Video Driver, version 24.0
[ 2331.716] (--) MGA(0): Video BIOS info block at offset 0x07A80
[ 2331.716] (==) MGA(0): VideoRAM: 16384 kByte
[ 2331.717] (II) Loading sub module "ddc"
[ 2331.721] (II) LoadModule: "ddc"
[ 2331.721] (II) Module "ddc" already built-in
[ 2331.721] (II) Loading sub module "i2c"
[ 2331.721] (II) LoadModule: "i2c"
[ 2331.721] (II) Module "i2c" already built-in
[ 2331.722] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B624A000.
[ 2331.722] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 2331.820] (II) MGA(0): I2C bus "DDC P1" initialized.
[ 2331.821] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
[ 2332.610] (--) MGA(0): No DDC signal
[ 2332.610] (II) Loading sub module "vbe"
[ 2332.610] (II) LoadModule: "vbe"
[ 2332.611] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2332.612] (II) Module vbe: vendor="X.Org Foundation"
[ 2332.612] compiled for 1.20.4, module version = 1.1.0
[ 2332.612] ABI class: X.Org Video Driver, version 24.0
[ 2332.612] (II) Loading sub module "int10"
[ 2332.612] (II) LoadModule: "int10"
[ 2332.613] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 2332.614] (II) Module int10: vendor="X.Org Foundation"
[ 2332.614] compiled for 1.20.4, module version = 1.0.0
[ 2332.614] ABI class: X.Org Video Driver, version 24.0
[ 2332.614] (II) MGA(0): initializing int10
[ 2332.616] (II) MGA(0): Primary V_BIOS segment is: 0xc000
[ 2332.617] (II) MGA(0): VESA BIOS detected
[ 2332.617] (II) MGA(0): VbeVersion is 512, OemStringPtr is 0xc0006cca,
OemVendorNamePtr is 0xc0006cdf, OemProductNamePtr is 0xc0006ce6,
OemProductRevPtr is 0xc0006cf2
[ 2332.617] (II) MGA(0): VESA VBE Version 2.0
[ 2332.617] (II) MGA(0): VESA VBE Total Mem: 16384 kB
[ 2332.617] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
[ 2332.617] (II) MGA(0): VESA VBE OEM Software Rev: 1.5
[ 2332.617] (II) MGA(0): VESA VBE OEM Vendor: Matrox
[ 2332.617] (II) MGA(0): VESA VBE OEM Product: Matrox G400
[ 2332.617] (II) MGA(0): VESA VBE OEM Product Rev: 00
[ 2332.761] (II) MGA(0): VESA VBE DDC supported
[ 2332.761] (II) MGA(0): VESA VBE DDC Level none
[ 2332.761] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
[ 2332.904] (II) MGA(0): VESA VBE DDC read failed
[ 2332.916] (II) MGA(0): UNMAPPING framebuffer 0xB624A000, 0x1000000.
[ 2332.918] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2332.919] (==) MGA(0): Min pixel clock is 17 MHz
[ 2332.919] (--) MGA(0): Max pixel clock is 300 MHz
[ 2332.919] (II) MGA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[ 2332.919] (II) MGA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[ 2332.919] (II) MGA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[ 2332.919] (WW) MGA(0): Unable to estimate virtual size
[ 2332.919] (II) MGA(0): Clock range: 17.75 to 300.00 MHz
[ 2332.919] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[ 2332.919] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[ 2332.919] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 2332.919] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 2332.919] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 2332.919] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[ 2332.919] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[ 2332.920] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[ 2332.920] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 2332.920] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 2332.920] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 2332.921] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "832x624" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "416x312" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[ 2332.922] (II) MGA(0): Not using default mode "1360x768" (mode clock too high)
[ 2332.922] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 2332.922] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1440x900" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "720x450" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1600x1024" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "800x512" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 2332.923] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2332.923] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[ 2332.924] (II) MGA(0): Not using default mode "960x540" (monitor doesn't support reduced blanking)
[ 2332.924] (II) MGA(0): Not using default mode "1024x576" (monitor doesn't support reduced blanking)
[ 2332.924] (II) MGA(0): Not using default mode "1280x720" (monitor doesn't support reduced blanking)
[ 2332.924] (II) MGA(0): Not using default mode "1280x720" (mode clock too high)
[ 2332.924] (II) MGA(0): Not using default mode "1368x768" (monitor doesn't support reduced blanking)
[ 2332.924] (II) MGA(0): Not using default mode "1368x768" (mode clock too high)
[ 2332.924] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[ 2332.924] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "2560x1440" (unknown reason)
[ 2332.925] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 2332.925] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[ 2332.925] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[ 2332.925] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[ 2332.925] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2332.926] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 2332.926] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "1920x1080" (unknown reason)
[ 2332.926] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 2332.926] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[ 2332.926] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[ 2332.926] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 2332.926] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 2332.926] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 2332.926] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2332.926] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[ 2332.926] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "2560x1600" (unknown reason)
[ 2332.927] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2332.927] (II) MGA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
[ 2332.927] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 2332.928] (II) MGA(0): Virtual size is 1024x768 (pitch 1024)
[ 2332.928] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 2332.928] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 2332.928] (**) MGA(0): *Default mode "1024x576": 46.5 MHz, 35.9 kHz, 59.9 Hz
[ 2332.928] (II) MGA(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz zd)
[ 2332.928] (**) MGA(0): *Default mode "960x540": 40.8 MHz, 33.5 kHz, 59.6 Hz
[ 2332.928] (II) MGA(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz zd)
[ 2332.928] (**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 2332.928] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 2332.928] (**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 2332.928] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 2332.928] (**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 2332.928] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 2332.928] (**) MGA(0): *Default mode "684x384": 42.6 MHz, 47.8 kHz, 59.9 Hz (D)
[ 2332.928] (II) MGA(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz zd)
[ 2332.928] (**) MGA(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "640x360": 37.2 MHz, 44.8 kHz, 59.9 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "512x288": 23.2 MHz, 35.9 kHz, 60.0 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "512x288": 21.0 MHz, 35.5 kHz, 59.9 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "480x270": 18.6 MHz, 33.3 kHz, 59.8 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "480x270": 20.4 MHz, 33.5 kHz, 59.6 Hz (D)
[ 2332.929] (II) MGA(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz zd)
[ 2332.929] (**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 2332.930] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 2332.930] (**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 2332.930] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 2332.930] (==) MGA(0): DPI set to (96, 96)
[ 2332.930] (II) MGA(0): YDstOrg is set to 0
[ 2332.930] (II) Loading sub module "fb"
[ 2332.930] (II) LoadModule: "fb"
[ 2332.930] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2332.931] (II) Module fb: vendor="X.Org Foundation"
[ 2332.931] compiled for 1.20.4, module version = 1.0.0
[ 2332.931] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2332.931] (II) Loading sub module "ramdac"
[ 2332.931] (II) LoadModule: "ramdac"
[ 2332.931] (II) Module "ramdac" already built-in
[ 2332.932] (II) UnloadModule: "modesetting"
[ 2332.932] (II) Unloading modesetting
[ 2332.933] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B622E000.
[ 2332.933] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 2333.027] (--) MGA(0): 16 DWORD fifo
[ 2333.042] (==) MGA(0): Default visual is TrueColor
[ 2333.042] (II) MGA(0): [drm] bpp: 32 depth: 24
[ 2333.042] (II) MGA(0): [drm] Sarea 2200+664: 2864
[ 2333.042] drmOpenDevice: node name is /dev/dri/card0
[ 2333.042] drmOpenDevice: open result is 14, (OK)
[ 2333.042] drmOpenDevice: node name is /dev/dri/card0
[ 2333.042] drmOpenDevice: open result is 14, (OK)
[ 2333.042] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 2333.042] drmOpenDevice: node name is /dev/dri/card0
[ 2333.043] drmOpenDevice: open result is 14, (OK)
[ 2333.043] drmOpenByBusid: drmOpenMinor returns 14
[ 2333.043] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 2333.043] (II) [drm] DRM interface version 1.4
[ 2333.043] (II) [drm] DRM open master succeeded.
[ 2333.043] (II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
[ 2333.043] (II) MGA(0): [drm] framebuffer handle = 0xdc000000
[ 2333.043] (II) MGA(0): [drm] added 1 reserved context for kernel
[ 2333.043] (II) MGA(0): X context handle = 0x1
[ 2333.044] (EE) MGA(0): [drm] failed to setup DRM signal handler
[ 2333.044] (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
[ 2333.044] (II) MGA(0): X 1024 Y 768 bpp 32
[ 2333.044] (II) MGA(0): Start at 0xb622e000, size ffec00, osb 301000
[ 2333.044] (II) EXA(0): Offscreen pixmap area of 13622272 bytes
[ 2333.044] (II) EXA(0): Driver registered support for the following operations:
[ 2333.044] (II) Solid
[ 2333.045] (II) Copy
[ 2333.045] (II) Composite (RENDER acceleration)
[ 2333.045] (II) UploadToScreen
[ 2333.045] (==) MGA(0): Backing store enabled
[ 2333.045] (==) MGA(0): Silken mouse enabled
[ 2333.045] (==) MGA(0): DPMS enabled
[ 2333.046] (II) MGA(0): Using overlay video
[ 2333.046] (WW) MGA(0): Direct rendering disabled
[ 2333.046] (II) Initializing extension Generic Event Extension
[ 2333.047] (II) Initializing extension SHAPE
[ 2333.048] (II) Initializing extension MIT-SHM
[ 2333.050] (II) Initializing extension XInputExtension
[ 2333.051] (II) Initializing extension XTEST
[ 2333.052] (II) Initializing extension BIG-REQUESTS
[ 2333.054] (II) Initializing extension SYNC
[ 2333.055] (II) Initializing extension XKEYBOARD
[ 2333.056] (II) Initializing extension XC-MISC
[ 2333.058] (II) Initializing extension SECURITY
[ 2333.059] (II) Initializing extension XFIXES
[ 2333.060] (II) Initializing extension RENDER
[ 2333.061] (II) Initializing extension RANDR
[ 2333.064] (II) Initializing extension COMPOSITE
[ 2333.065] (II) Initializing extension DAMAGE
[ 2333.066] (II) Initializing extension MIT-SCREEN-SAVER
[ 2333.067] (II) Initializing extension DOUBLE-BUFFER
[ 2333.069] (II) Initializing extension RECORD
[ 2333.070] (II) Initializing extension DPMS
[ 2333.071] (II) Initializing extension Present
[ 2333.072] (II) Initializing extension DRI3
[ 2333.072] (II) Initializing extension X-Resource
[ 2333.073] (II) Initializing extension XVideo
[ 2333.075] (II) Initializing extension XVideo-MotionCompensation
[ 2333.075] (II) Initializing extension SELinux
[ 2333.075] (II) SELinux: Disabled on system
[ 2333.075] (II) Initializing extension GLX
[ 2333.076] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2333.279] (II) IGLX: Loaded and initialized swrast
[ 2333.279] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2333.279] (II) Initializing extension XFree86-VidModeExtension
[ 2333.280] (II) Initializing extension XFree86-DGA
[ 2333.281] (II) Initializing extension XFree86-DRI
[ 2333.283] (II) Initializing extension DRI2
[ 2333.488] (II) XKB: Reusing cached keymap
[ 2333.554] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 2333.554] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2333.554] (II) LoadModule: "evdev"
[ 2333.555] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2333.557] (II) Module evdev: vendor="X.Org Foundation"
[ 2333.557] compiled for 1.20.1, module version = 2.10.6
[ 2333.557] Module class: X.Org XInput Driver
[ 2333.557] ABI class: X.Org XInput driver, version 24.1
[ 2333.558] (II) Using input driver 'evdev' for 'Power Button'
[ 2333.558] Option "_source" "server/udev"
[ 2333.558] Option "name" "Power Button"
[ 2333.558] Option "path" "/dev/input/event4"
[ 2333.558] Option "device" "/dev/input/event4"
[ 2333.558] Option "major" "13"
[ 2333.558] Option "minor" "68"
[ 2333.558] Option "xkb_layout" "de"
[ 2333.558] Option "xkb_model" "pc105"
[ 2333.558] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 2333.558] Option "driver" "evdev"
[ 2333.558] (**) Power Button: always reports core events
[ 2333.558] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 2333.559] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2333.559] (--) evdev: Power Button: Found keys
[ 2333.559] (II) evdev: Power Button: Configuring as keyboard
[ 2333.559] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 2333.559] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2333.559] (**) Option "xkb_rules" "evdev"
[ 2333.559] (**) Option "xkb_model" "pc105"
[ 2333.559] (**) Option "xkb_layout" "de"
[ 2333.695] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2333.695] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2333.696] (II) Using input driver 'evdev' for 'Power Button'
[ 2333.696] Option "_source" "server/udev"
[ 2333.696] Option "name" "Power Button"
[ 2333.696] Option "path" "/dev/input/event2"
[ 2333.696] Option "device" "/dev/input/event2"
[ 2333.696] Option "major" "13"
[ 2333.696] Option "minor" "66"
[ 2333.696] Option "xkb_layout" "de"
[ 2333.696] Option "xkb_model" "pc105"
[ 2333.696] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 2333.696] Option "driver" "evdev"
[ 2333.696] (**) Power Button: always reports core events
[ 2333.696] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2333.696] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2333.696] (--) evdev: Power Button: Found keys
[ 2333.696] (II) evdev: Power Button: Configuring as keyboard
[ 2333.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 2333.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2333.697] (**) Option "xkb_rules" "evdev"
[ 2333.697] (**) Option "xkb_model" "pc105"
[ 2333.697] (**) Option "xkb_layout" "de"
[ 2333.697] (II) XKB: Reusing cached keymap
[ 2333.702] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 2333.703] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2333.703] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2333.703] Option "_source" "server/udev"
[ 2333.703] Option "name" "Sleep Button"
[ 2333.703] Option "path" "/dev/input/event3"
[ 2333.703] Option "device" "/dev/input/event3"
[ 2333.703] Option "major" "13"
[ 2333.703] Option "minor" "67"
[ 2333.703] Option "xkb_layout" "de"
[ 2333.703] Option "xkb_model" "pc105"
[ 2333.703] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 2333.703] Option "driver" "evdev"
[ 2333.703] (**) Sleep Button: always reports core events
[ 2333.703] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 2333.704] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2333.704] (--) evdev: Sleep Button: Found keys
[ 2333.704] (II) evdev: Sleep Button: Configuring as keyboard
[ 2333.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 2333.704] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2333.704] (**) Option "xkb_rules" "evdev"
[ 2333.704] (**) Option "xkb_model" "pc105"
[ 2333.704] (**) Option "xkb_layout" "de"
[ 2333.704] (II) XKB: Reusing cached keymap
[ 2333.710] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2333.710] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2333.711] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2333.711] Option "_source" "server/udev"
[ 2333.711] Option "name" "AT Translated Set 2 keyboard"
[ 2333.711] Option "path" "/dev/input/event0"
[ 2333.711] Option "device" "/dev/input/event0"
[ 2333.711] Option "major" "13"
[ 2333.711] Option "minor" "64"
[ 2333.711] Option "xkb_layout" "de"
[ 2333.711] Option "xkb_model" "pc105"
[ 2333.711] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2333.711] Option "driver" "evdev"
[ 2333.711] (**) AT Translated Set 2 keyboard: always reports core events
[ 2333.711] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2333.711] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2333.711] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2333.711] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2333.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2333.712] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2333.712] (**) Option "xkb_rules" "evdev"
[ 2333.712] (**) Option "xkb_model" "pc105"
[ 2333.712] (**) Option "xkb_layout" "de"
[ 2333.712] (II) XKB: Reusing cached keymap
[ 2333.717] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[ 2333.717] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 2333.717] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 2333.717] Option "_source" "server/udev"
[ 2333.718] Option "name" "ImExPS/2 Generic Explorer Mouse"
[ 2333.718] Option "path" "/dev/input/event1"
[ 2333.718] Option "device" "/dev/input/event1"
[ 2333.718] Option "major" "13"
[ 2333.718] Option "minor" "65"
[ 2333.718] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 2333.718] Option "driver" "evdev"
[ 2333.718] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 2333.718] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[ 2333.718] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 2333.718] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 2333.718] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 2333.718] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 2333.718] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 2333.719] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 2333.719] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 2333.719] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 2333.719] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2333.719] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 2333.719] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 2333.719] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 2333.720] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 2333.721] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 2333.721] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 2333.721] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 2333.724] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 2333.724] (II) No input driver specified, ignoring this device.
[ 2333.724] (II) This device may have been added with another device file.
[ 2333.727] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 2333.727] (II) No input driver specified, ignoring this device.
[ 2333.727] (II) This device may have been added with another device file.
[ 2333.761] (EE)
[ 2333.761] (EE) Backtrace:
[ 2333.763] (EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x5fecf2]
[ 2333.767] (EE) 1: linux-gate.so.1 (?+0x0) [0xb7ef9d87]
[ 2333.770] (EE) 2: ? (?+0x0) [0xc0000000]
[ 2333.771] (EE) unw_step failed: unspecified (general) error [-1]
[ 2333.771] (EE)
[ 2333.771] (EE) Segmentation fault at address 0xc0000000
[ 2333.772] (EE)
Fatal server error:
[ 2333.772] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2333.773] (EE)
[ 2333.773] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2333.774] (EE) Please also check the log file at "log2_0.txt" for additional information.
[ 2333.775] (EE)
[ 2333.793] (EE) Server terminated with error (1). Closing log file.
-------------- next part --------------
[ 3996.033]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 3996.033] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[ 3996.034] Current Operating System: Linux lune 4.19.0-5-686-pae #1 SMP Debian 4.19.37-5 (2019-06-19) i686
[ 3996.034] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686-pae root=/dev/sda7
[ 3996.034] Build Date: 05 March 2019 08:11:12PM
[ 3996.034] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[ 3996.035] Current version of pixman: 0.36.0
[ 3996.035] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3996.035] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3996.038] (++) Log file: "log3_0.txt", Time: Thu Jul 18 00:35:07 2019
[ 3996.041] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3996.042] (==) No Layout section. Using the first Screen section.
[ 3996.042] (==) No screen section available. Using defaults.
[ 3996.042] (**) |-->Screen "Default Screen Section" (0)
[ 3996.042] (**) | |-->Monitor "<default monitor>"
[ 3996.044] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3996.044] (==) Automatically adding devices
[ 3996.044] (==) Automatically enabling devices
[ 3996.044] (==) Automatically adding GPU devices
[ 3996.044] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3996.044] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3996.044] Entry deleted from font path.
[ 3996.044] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 3996.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3996.044] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3996.044] (II) Loader magic: 0x73e740
[ 3996.044] (II) Module ABI versions:
[ 3996.044] X.Org ANSI C Emulation: 0.4
[ 3996.045] X.Org Video Driver: 24.0
[ 3996.045] X.Org XInput driver : 24.1
[ 3996.049] X.Org Server Extension : 10.0
[ 3996.055] (--) using VT number 3
[ 3996.055] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3996.061] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3996.073] (--) PCI:*(1 at 0:0:0) 102b:0525:102b:19d8 rev 4, Mem @ 0xdc000000/33554432, 0xdfefc000/16384, 0xdf000000/8388608, BIOS @ 0x????????/131072
[ 3996.073] (II) LoadModule: "glx"
[ 3996.074] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3996.085] (II) Module glx: vendor="X.Org Foundation"
[ 3996.086] compiled for 1.20.4, module version = 1.0.0
[ 3996.086] ABI class: X.Org Server Extension, version 10.0
[ 3996.086] (==) Matched mga as autoconfigured driver 0
[ 3996.086] (==) Matched modesetting as autoconfigured driver 1
[ 3996.086] (==) Matched fbdev as autoconfigured driver 2
[ 3996.086] (==) Matched vesa as autoconfigured driver 3
[ 3996.086] (==) Assigned the driver to the xf86ConfigLayout
[ 3996.086] (II) LoadModule: "mga"
[ 3996.087] (II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
[ 3996.087] (II) Module mga: vendor="X.Org Foundation"
[ 3996.087] compiled for 1.20.3, module version = 2.0.0
[ 3996.087] Module class: X.Org Video Driver
[ 3996.087] ABI class: X.Org Video Driver, version 24.0
[ 3996.087] (II) LoadModule: "modesetting"
[ 3996.088] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3996.093] (II) Module modesetting: vendor="X.Org Foundation"
[ 3996.093] compiled for 1.20.4, module version = 1.20.4
[ 3996.093] Module class: X.Org Video Driver
[ 3996.093] ABI class: X.Org Video Driver, version 24.0
[ 3996.093] (II) LoadModule: "fbdev"
[ 3996.094] (WW) Warning, couldn't open module fbdev
[ 3996.094] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3996.094] (II) LoadModule: "vesa"
[ 3996.095] (WW) Warning, couldn't open module vesa
[ 3996.095] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3996.095] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200 eW3 Nuvoton,
mgag200eH, mgag200eH3, mgag400, mgag550
[ 3996.096] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3996.110] (WW) Falling back to old probe method for modesetting
[ 3996.111] (II) Loading sub module "vgahw"
[ 3996.111] (II) LoadModule: "vgahw"
[ 3996.111] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 3996.112] (II) Module vgahw: vendor="X.Org Foundation"
[ 3996.112] compiled for 1.20.4, module version = 0.1.0
[ 3996.112] ABI class: X.Org Video Driver, version 24.0
[ 3996.112] (--) MGA(0): Chipset: "mgag400" (G400)
[ 3996.117] xf86TokenToOptinfo: table is NULL
[ 3996.121] xf86TokenToOptinfo: table is NULL
[ 3996.121] (==) MGA(0): Using HW cursor
[ 3996.121] (--) MGA(0): Linear framebuffer at 0xDC000000
[ 3996.121] (--) MGA(0): MMIO registers at 0xDFEFC000
[ 3996.121] (--) MGA(0): Pseudo-DMA transfer window at 0xDF000000
[ 3996.122] (II) MGA(0): MAPPED Framebuffer DC000000 2000000 to B524C000.
[ 3996.123] (II) MGA(0): UNMAPPING framebuffer 0xB524C000, 0x2000000.
[ 3996.130] (II) MGA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3996.130] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
[ 3996.130] (==) MGA(0): RGB weight 888
[ 3996.131] (==) MGA(0): Using AGP 1x mode
[ 3996.131] (==) MGA(0): Using EXA acceleration
[ 3996.131] (II) Loading sub module "exa"
[ 3996.131] (II) LoadModule: "exa"
[ 3996.131] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 3996.132] (II) Module exa: vendor="X.Org Foundation"
[ 3996.132] compiled for 1.20.4, module version = 2.6.0
[ 3996.132] ABI class: X.Org Video Driver, version 24.0
[ 3996.141] (--) MGA(0): Video BIOS info block at offset 0x07A80
[ 3996.141] (==) MGA(0): VideoRAM: 16384 kByte
[ 3996.141] (II) Loading sub module "ddc"
[ 3996.141] (II) LoadModule: "ddc"
[ 3996.142] (II) Module "ddc" already built-in
[ 3996.142] (II) Loading sub module "i2c"
[ 3996.142] (II) LoadModule: "i2c"
[ 3996.142] (II) Module "i2c" already built-in
[ 3996.142] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B6230000.
[ 3996.143] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 3996.247] (II) MGA(0): I2C bus "DDC P1" initialized.
[ 3996.247] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
[ 3997.046] (--) MGA(0): No DDC signal
[ 3997.046] (II) Loading sub module "vbe"
[ 3997.046] (II) LoadModule: "vbe"
[ 3997.047] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 3997.047] (II) Module vbe: vendor="X.Org Foundation"
[ 3997.048] compiled for 1.20.4, module version = 1.1.0
[ 3997.048] ABI class: X.Org Video Driver, version 24.0
[ 3997.048] (II) Loading sub module "int10"
[ 3997.048] (II) LoadModule: "int10"
[ 3997.048] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 3997.049] (II) Module int10: vendor="X.Org Foundation"
[ 3997.049] compiled for 1.20.4, module version = 1.0.0
[ 3997.049] ABI class: X.Org Video Driver, version 24.0
[ 3997.050] (II) MGA(0): initializing int10
[ 3997.052] (II) MGA(0): Primary V_BIOS segment is: 0xc000
[ 3997.052] (II) MGA(0): VESA BIOS detected
[ 3997.053] (II) MGA(0): VbeVersion is 512, OemStringPtr is 0xc0006cca,
OemVendorNamePtr is 0xc0006cdf, OemProductNamePtr is 0xc0006ce6,
OemProductRevPtr is 0xc0006cf2
[ 3997.053] (II) MGA(0): VESA VBE Version 2.0
[ 3997.053] (II) MGA(0): VESA VBE Total Mem: 16384 kB
[ 3997.053] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
[ 3997.053] (II) MGA(0): VESA VBE OEM Software Rev: 1.5
[ 3997.053] (II) MGA(0): VESA VBE OEM Vendor: Matrox
[ 3997.053] (II) MGA(0): VESA VBE OEM Product: Matrox G400
[ 3997.053] (II) MGA(0): VESA VBE OEM Product Rev: 00
[ 3997.196] (II) MGA(0): VESA VBE DDC supported
[ 3997.196] (II) MGA(0): VESA VBE DDC Level none
[ 3997.196] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
[ 3997.338] (II) MGA(0): VESA VBE DDC read failed
[ 3997.350] (II) MGA(0): UNMAPPING framebuffer 0xB6230000, 0x1000000.
[ 3997.358] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3997.358] (==) MGA(0): Min pixel clock is 17 MHz
[ 3997.358] (--) MGA(0): Max pixel clock is 300 MHz
[ 3997.358] (II) MGA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
[ 3997.358] (II) MGA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[ 3997.358] (II) MGA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
[ 3997.358] (WW) MGA(0): Unable to estimate virtual size
[ 3997.358] (II) MGA(0): Clock range: 17.75 to 300.00 MHz
[ 3997.358] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
[ 3997.358] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[ 3997.358] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
[ 3997.358] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[ 3997.358] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
[ 3997.358] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
[ 3997.358] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 3997.358] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 3997.358] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 3997.358] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 3997.358] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 3997.359] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 3997.359] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[ 3997.360] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[ 3997.361] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[ 3997.361] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[ 3997.361] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "832x624" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "416x312" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 3997.365] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[ 3997.366] (II) MGA(0): Not using default mode "1360x768" (mode clock too high)
[ 3997.366] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1440x900" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "720x450" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1600x1024" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "800x512" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 3997.366] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 3997.367] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 3997.367] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 3997.367] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[ 3997.367] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[ 3997.367] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[ 3997.367] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[ 3997.368] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[ 3997.368] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[ 3997.368] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[ 3997.368] (II) MGA(0): Not using default mode "960x540" (monitor doesn't support reduced blanking)
[ 3997.368] (II) MGA(0): Not using default mode "1024x576" (monitor doesn't support reduced blanking)
[ 3997.368] (II) MGA(0): Not using default mode "1280x720" (monitor doesn't support reduced blanking)
[ 3997.368] (II) MGA(0): Not using default mode "1280x720" (mode clock too high)
[ 3997.368] (II) MGA(0): Not using default mode "1368x768" (monitor doesn't support reduced blanking)
[ 3997.368] (II) MGA(0): Not using default mode "1368x768" (mode clock too high)
[ 3997.368] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[ 3997.368] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[ 3997.369] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[ 3997.369] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[ 3997.369] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "2560x1440" (unknown reason)
[ 3997.373] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 3997.373] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[ 3997.373] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[ 3997.373] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[ 3997.373] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[ 3997.373] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[ 3997.373] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 3997.373] (II) MGA(0): Not using default mode "1920x1080" (unknown reason)
[ 3997.374] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 3997.374] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[ 3997.374] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[ 3997.374] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 3997.374] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[ 3997.374] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[ 3997.374] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 3997.374] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[ 3997.374] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 3997.374] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[ 3997.374] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[ 3997.374] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[ 3997.374] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "2560x1600" (unknown reason)
[ 3997.375] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 3997.375] (II) MGA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
[ 3997.375] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[ 3997.376] (II) MGA(0): Virtual size is 1024x768 (pitch 1024)
[ 3997.376] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 3997.376] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 3997.376] (**) MGA(0): *Default mode "1024x576": 46.5 MHz, 35.9 kHz, 59.9 Hz
[ 3997.376] (II) MGA(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz zd)
[ 3997.376] (**) MGA(0): *Default mode "960x540": 40.8 MHz, 33.5 kHz, 59.6 Hz
[ 3997.376] (II) MGA(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz zd)
[ 3997.376] (**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 3997.376] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 3997.376] (**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 3997.376] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 3997.376] (**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 3997.376] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 3997.376] (**) MGA(0): *Default mode "684x384": 42.6 MHz, 47.8 kHz, 59.9 Hz (D)
[ 3997.376] (II) MGA(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz zd)
[ 3997.376] (**) MGA(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 3997.376] (II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz zd)
[ 3997.377] (**) MGA(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 3997.377] (II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz zd)
[ 3997.377] (**) MGA(0): *Default mode "640x360": 37.2 MHz, 44.8 kHz, 59.9 Hz (D)
[ 3997.377] (II) MGA(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz zd)
[ 3997.377] (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 3997.377] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 3997.377] (**) MGA(0): *Default mode "512x288": 23.2 MHz, 35.9 kHz, 60.0 Hz (D)
[ 3997.378] (II) MGA(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz zd)
[ 3997.378] (**) MGA(0): *Default mode "512x288": 21.0 MHz, 35.5 kHz, 59.9 Hz (D)
[ 3997.378] (II) MGA(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz zd)
[ 3997.378] (**) MGA(0): *Default mode "480x270": 18.6 MHz, 33.3 kHz, 59.8 Hz (D)
[ 3997.378] (II) MGA(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz zd)
[ 3997.378] (**) MGA(0): *Default mode "480x270": 20.4 MHz, 33.5 kHz, 59.6 Hz (D)
[ 3997.378] (II) MGA(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz zd)
[ 3997.378] (**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 3997.378] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 3997.378] (**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 3997.378] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 3997.378] (==) MGA(0): DPI set to (96, 96)
[ 3997.378] (II) MGA(0): YDstOrg is set to 0
[ 3997.378] (II) Loading sub module "fb"
[ 3997.378] (II) LoadModule: "fb"
[ 3997.379] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3997.380] (II) Module fb: vendor="X.Org Foundation"
[ 3997.380] compiled for 1.20.4, module version = 1.0.0
[ 3997.380] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3997.380] (II) Loading sub module "ramdac"
[ 3997.380] (II) LoadModule: "ramdac"
[ 3997.380] (II) Module "ramdac" already built-in
[ 3997.380] (II) UnloadModule: "modesetting"
[ 3997.380] (II) Unloading modesetting
[ 3997.381] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B6214000.
[ 3997.382] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 3997.476] (--) MGA(0): 16 DWORD fifo
[ 3997.491] (==) MGA(0): Default visual is TrueColor
[ 3997.491] (II) MGA(0): [drm] bpp: 32 depth: 24
[ 3997.491] (II) MGA(0): [drm] Sarea 2200+664: 2864
[ 3997.491] drmOpenDevice: node name is /dev/dri/card0
[ 3997.492] drmOpenDevice: open result is 15, (OK)
[ 3997.492] drmOpenDevice: node name is /dev/dri/card0
[ 3997.492] drmOpenDevice: open result is 15, (OK)
[ 3997.492] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 3997.492] drmOpenDevice: node name is /dev/dri/card0
[ 3997.492] drmOpenDevice: open result is 15, (OK)
[ 3997.492] drmOpenByBusid: drmOpenMinor returns 15
[ 3997.492] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 3997.492] (II) [drm] DRM interface version 1.4
[ 3997.493] (II) [drm] DRM open master succeeded.
[ 3997.493] (II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
[ 3997.493] (II) MGA(0): [drm] framebuffer handle = 0xdc000000
[ 3997.493] (II) MGA(0): [drm] added 1 reserved context for kernel
[ 3997.493] (II) MGA(0): X context handle = 0x1
[ 3997.493] (EE) MGA(0): [drm] failed to setup DRM signal handler
[ 3997.493] (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI.
[ 3997.494] (II) MGA(0): X 1024 Y 768 bpp 32
[ 3997.494] (II) MGA(0): Start at 0xb6214000, size ffec00, osb 301000
[ 3997.494] (II) EXA(0): Offscreen pixmap area of 13622272 bytes
[ 3997.494] (II) EXA(0): Driver registered support for the following operations:
[ 3997.494] (II) Solid
[ 3997.494] (II) Copy
[ 3997.494] (II) Composite (RENDER acceleration)
[ 3997.494] (II) UploadToScreen
[ 3997.494] (==) MGA(0): Backing store enabled
[ 3997.494] (==) MGA(0): Silken mouse enabled
[ 3997.495] (==) MGA(0): DPMS enabled
[ 3997.495] (II) MGA(0): Using overlay video
[ 3997.495] (WW) MGA(0): Direct rendering disabled
[ 3997.495] (II) Initializing extension Generic Event Extension
[ 3997.497] (II) Initializing extension SHAPE
[ 3997.498] (II) Initializing extension MIT-SHM
[ 3997.499] (II) Initializing extension XInputExtension
[ 3997.501] (II) Initializing extension XTEST
[ 3997.502] (II) Initializing extension BIG-REQUESTS
[ 3997.504] (II) Initializing extension SYNC
[ 3997.505] (II) Initializing extension XKEYBOARD
[ 3997.506] (II) Initializing extension XC-MISC
[ 3997.507] (II) Initializing extension SECURITY
[ 3997.509] (II) Initializing extension XFIXES
[ 3997.510] (II) Initializing extension RENDER
[ 3997.511] (II) Initializing extension RANDR
[ 3997.514] (II) Initializing extension COMPOSITE
[ 3997.515] (II) Initializing extension DAMAGE
[ 3997.516] (II) Initializing extension MIT-SCREEN-SAVER
[ 3997.517] (II) Initializing extension DOUBLE-BUFFER
[ 3997.519] (II) Initializing extension RECORD
[ 3997.520] (II) Initializing extension DPMS
[ 3997.521] (II) Initializing extension Present
[ 3997.522] (II) Initializing extension DRI3
[ 3997.522] (II) Initializing extension X-Resource
[ 3997.523] (II) Initializing extension XVideo
[ 3997.525] (II) Initializing extension XVideo-MotionCompensation
[ 3997.525] (II) Initializing extension SELinux
[ 3997.525] (II) SELinux: Disabled on system
[ 3997.525] (II) Initializing extension GLX
[ 3997.526] (II) AIGLX: Screen 0 is not DRI2 capable
[ 3997.720] (II) IGLX: Loaded and initialized swrast
[ 3997.720] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 3997.720] (II) Initializing extension XFree86-VidModeExtension
[ 3997.722] (II) Initializing extension XFree86-DGA
[ 3997.723] (II) Initializing extension XFree86-DRI
[ 3997.724] (II) Initializing extension DRI2
[ 3997.928] (II) XKB: Reusing cached keymap
[ 3997.992] (II) config/udev: getting attribute name on (null) returned "Power Button"
[ 3997.993] (II) config/udev: getting property PRODUCT on (null) returned "19/0/1/0"
[ 3997.993] (II) config/udev: getting property ID_INPUT.tags on /dev/input/event4 returned "(null)"
[ 3997.994] (II) config/udev: getting property ID_INPUT_KEY on /dev/input/event4 returned "1"
[ 3997.994] (II) config/udev: getting property XKBLAYOUT on /dev/input/event4 returned "de"
[ 3997.994] (II) config/udev: getting property XKBMODEL on /dev/input/event4 returned "pc105"
[ 3997.994] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 3997.994] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3997.994] (II) LoadModule: "evdev"
[ 3997.994] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3997.997] (II) Module evdev: vendor="X.Org Foundation"
[ 3997.997] compiled for 1.20.1, module version = 2.10.6
[ 3997.997] Module class: X.Org XInput Driver
[ 3997.997] ABI class: X.Org XInput driver, version 24.1
[ 3997.997] (II) Using input driver 'evdev' for 'Power Button'
[ 3997.997] Option "_source" "server/udev"
[ 3997.997] Option "name" "Power Button"
[ 3997.997] Option "path" "/dev/input/event4"
[ 3997.998] Option "device" "/dev/input/event4"
[ 3997.998] Option "major" "13"
[ 3997.998] Option "minor" "68"
[ 3997.998] Option "xkb_layout" "de"
[ 3997.998] Option "xkb_model" "pc105"
[ 3997.998] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 3997.998] Option "driver" "evdev"
[ 3997.998] (**) Power Button: always reports core events
[ 3997.998] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 3997.998] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3997.999] (--) evdev: Power Button: Found keys
[ 3997.999] (II) evdev: Power Button: Configuring as keyboard
[ 3997.999] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 3997.999] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3997.999] (**) Option "xkb_rules" "evdev"
[ 3997.999] (**) Option "xkb_model" "pc105"
[ 3997.999] (**) Option "xkb_layout" "de"
[ 3998.134] (II) config/udev: getting attribute name on (null) returned "Power Button"
[ 3998.134] (II) config/udev: getting property PRODUCT on (null) returned "19/0/1/0"
[ 3998.135] (II) config/udev: getting property ID_INPUT.tags on /dev/input/event2 returned "(null)"
[ 3998.135] (II) config/udev: getting property ID_INPUT_KEY on /dev/input/event2 returned "1"
[ 3998.135] (II) config/udev: getting property XKBLAYOUT on /dev/input/event2 returned "de"
[ 3998.135] (II) config/udev: getting property XKBMODEL on /dev/input/event2 returned "pc105"
[ 3998.135] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 3998.135] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3998.135] (II) Using input driver 'evdev' for 'Power Button'
[ 3998.135] Option "_source" "server/udev"
[ 3998.135] Option "name" "Power Button"
[ 3998.135] Option "path" "/dev/input/event2"
[ 3998.135] Option "device" "/dev/input/event2"
[ 3998.135] Option "major" "13"
[ 3998.136] Option "minor" "66"
[ 3998.136] Option "xkb_layout" "de"
[ 3998.136] Option "xkb_model" "pc105"
[ 3998.136] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 3998.136] Option "driver" "evdev"
[ 3998.136] (**) Power Button: always reports core events
[ 3998.136] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 3998.136] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3998.136] (--) evdev: Power Button: Found keys
[ 3998.136] (II) evdev: Power Button: Configuring as keyboard
[ 3998.136] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 3998.137] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3998.137] (**) Option "xkb_rules" "evdev"
[ 3998.137] (**) Option "xkb_model" "pc105"
[ 3998.137] (**) Option "xkb_layout" "de"
[ 3998.137] (II) XKB: Reusing cached keymap
[ 3998.141] (II) config/udev: getting attribute name on (null) returned "Sleep Button"
[ 3998.142] (II) config/udev: getting property PRODUCT on (null) returned "19/0/3/0"
[ 3998.142] (II) config/udev: getting property ID_INPUT.tags on /dev/input/event3 returned "(null)"
[ 3998.143] (II) config/udev: getting property ID_INPUT_KEY on /dev/input/event3 returned "1"
[ 3998.143] (II) config/udev: getting property XKBLAYOUT on /dev/input/event3 returned "de"
[ 3998.143] (II) config/udev: getting property XKBMODEL on /dev/input/event3 returned "pc105"
[ 3998.143] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3998.143] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3998.143] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3998.143] Option "_source" "server/udev"
[ 3998.143] Option "name" "Sleep Button"
[ 3998.143] Option "path" "/dev/input/event3"
[ 3998.143] Option "device" "/dev/input/event3"
[ 3998.143] Option "major" "13"
[ 3998.143] Option "minor" "67"
[ 3998.143] Option "xkb_layout" "de"
[ 3998.143] Option "xkb_model" "pc105"
[ 3998.143] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 3998.143] Option "driver" "evdev"
[ 3998.143] (**) Sleep Button: always reports core events
[ 3998.143] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 3998.144] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3998.144] (--) evdev: Sleep Button: Found keys
[ 3998.144] (II) evdev: Sleep Button: Configuring as keyboard
[ 3998.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 3998.144] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3998.144] (**) Option "xkb_rules" "evdev"
[ 3998.144] (**) Option "xkb_model" "pc105"
[ 3998.144] (**) Option "xkb_layout" "de"
[ 3998.144] (II) XKB: Reusing cached keymap
[ 3998.150] (II) config/udev: getting attribute name on (null) returned "AT Translated Set 2 keyboard"
[ 3998.150] (II) config/udev: getting property PRODUCT on (null) returned "11/1/1/ab41"
[ 3998.151] (II) config/udev: getting property ID_INPUT.tags on /dev/input/event0 returned "(null)"
[ 3998.151] (II) config/udev: getting property ID_INPUT_KEY on /dev/input/event0 returned "1"
[ 3998.151] (II) config/udev: getting property ID_INPUT_KEYBOARD on /dev/input/event0 returned "1"
[ 3998.151] (II) config/udev: getting property XKBLAYOUT on /dev/input/event0 returned "de"
[ 3998.151] (II) config/udev: getting property XKBMODEL on /dev/input/event0 returned "pc105"
[ 3998.151] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3998.151] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3998.151] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3998.151] Option "_source" "server/udev"
[ 3998.151] Option "name" "AT Translated Set 2 keyboard"
[ 3998.151] Option "path" "/dev/input/event0"
[ 3998.151] Option "device" "/dev/input/event0"
[ 3998.151] Option "major" "13"
[ 3998.151] Option "minor" "64"
[ 3998.151] Option "xkb_layout" "de"
[ 3998.151] Option "xkb_model" "pc105"
[ 3998.151] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3998.152] Option "driver" "evdev"
[ 3998.152] (**) AT Translated Set 2 keyboard: always reports core events
[ 3998.152] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3998.152] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3998.152] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3998.152] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3998.152] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3998.152] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 3998.152] (**) Option "xkb_rules" "evdev"
[ 3998.152] (**) Option "xkb_model" "pc105"
[ 3998.153] (**) Option "xkb_layout" "de"
[ 3998.153] (II) XKB: Reusing cached keymap
[ 3998.157] (II) config/udev: getting attribute name on (null) returned "ImExPS/2 Generic Explorer Mouse"
[ 3998.157] (II) config/udev: getting property PRODUCT on (null) returned "11/2/6/0"
[ 3998.158] (II) config/udev: getting property ID_INPUT.tags on /dev/input/event1 returned "(null)"
[ 3998.158] (II) config/udev: getting property ID_INPUT_MOUSE on /dev/input/event1 returned "1"
[ 3998.158] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[ 3998.158] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 3998.158] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 3998.159] Option "_source" "server/udev"
[ 3998.159] Option "name" "ImExPS/2 Generic Explorer Mouse"
[ 3998.159] Option "path" "/dev/input/event1"
[ 3998.159] Option "device" "/dev/input/event1"
[ 3998.159] Option "major" "13"
[ 3998.159] Option "minor" "65"
[ 3998.159] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 3998.159] Option "driver" "evdev"
[ 3998.159] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 3998.159] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[ 3998.159] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 3998.159] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 3998.159] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 3998.159] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 3998.159] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 3998.160] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 3998.160] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 3998.160] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 3998.160] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3998.160] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 3998.160] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 3998.160] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 3998.162] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 3998.162] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 3998.162] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 3998.162] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 3998.164] (II) config/udev: getting attribute name on (null) returned "ImExPS/2 Generic Explorer Mouse"
[ 3998.164] (II) config/udev: getting property PRODUCT on (null) returned "11/2/6/0"
[ 3998.165] (II) config/udev: getting property ID_INPUT.tags on /dev/input/mouse0 returned "(null)"
[ 3998.165] (II) config/udev: getting property ID_INPUT_MOUSE on /dev/input/mouse0 returned "1"
[ 3998.165] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 3998.166] (II) No input driver specified, ignoring this device.
[ 3998.166] (II) This device may have been added with another device file.
[ 3998.168] (II) config/udev: getting attribute name on (null) returned "PC Speaker"
[ 3998.168] (II) config/udev: getting property PRODUCT on (null) returned "10/1f/1/100"
[ 3998.168] (II) config/udev: getting property ID_INPUT.tags on /dev/input/event5 returned "(null)"
[ 3998.169] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 3998.169] (II) No input driver specified, ignoring this device.
[ 3998.169] (II) This device may have been added with another device file.
[ 3998.170] (II) config/udev: ignoring device /dev/ttyS1 without property ID_INPUT set
[ 3998.170] (II) config/udev: ignoring device /dev/ttyS2 without property ID_INPUT set
[ 3998.171] (II) config/udev: ignoring device /dev/ttyS3 without property ID_INPUT set
[ 3998.172] (II) config/udev: ignoring device /dev/ttyS0 without property ID_INPUT set
[ 3998.172] (II) config/udev: ignoring device /dev/input/mice without property ID_INPUT set
[ 3998.173] (II) config/udev: ignoring device /dev/console without property ID_INPUT set
[ 3998.174] (II) config/udev: ignoring device /dev/ptmx without property ID_INPUT set
[ 3998.174] (II) config/udev: ignoring device /dev/tty without property ID_INPUT set
[ 3998.175] (II) config/udev: ignoring device /dev/tty0 without property ID_INPUT set
[ 3998.176] (II) config/udev: ignoring device /dev/tty1 without property ID_INPUT set
[ 3998.176] (II) config/udev: ignoring device /dev/tty10 without property ID_INPUT set
[ 3998.177] (II) config/udev: ignoring device /dev/tty11 without property ID_INPUT set
[ 3998.178] (II) config/udev: ignoring device /dev/tty12 without property ID_INPUT set
[ 3998.178] (II) config/udev: ignoring device /dev/tty13 without property ID_INPUT set
[ 3998.179] (II) config/udev: ignoring device /dev/tty14 without property ID_INPUT set
[ 3998.179] (II) config/udev: ignoring device /dev/tty15 without property ID_INPUT set
[ 3998.180] (II) config/udev: ignoring device /dev/tty16 without property ID_INPUT set
[ 3998.180] (II) config/udev: ignoring device /dev/tty17 without property ID_INPUT set
[ 3998.181] (II) config/udev: ignoring device /dev/tty18 without property ID_INPUT set
[ 3998.182] (II) config/udev: ignoring device /dev/tty19 without property ID_INPUT set
[ 3998.182] (II) config/udev: ignoring device /dev/tty2 without property ID_INPUT set
[ 3998.183] (II) config/udev: ignoring device /dev/tty20 without property ID_INPUT set
[ 3998.183] (II) config/udev: ignoring device /dev/tty21 without property ID_INPUT set
[ 3998.184] (II) config/udev: ignoring device /dev/tty22 without property ID_INPUT set
[ 3998.185] (II) config/udev: ignoring device /dev/tty23 without property ID_INPUT set
[ 3998.185] (II) config/udev: ignoring device /dev/tty24 without property ID_INPUT set
[ 3998.186] (II) config/udev: ignoring device /dev/tty25 without property ID_INPUT set
[ 3998.187] (II) config/udev: ignoring device /dev/tty26 without property ID_INPUT set
[ 3998.187] (II) config/udev: ignoring device /dev/tty27 without property ID_INPUT set
[ 3998.188] (II) config/udev: ignoring device /dev/tty28 without property ID_INPUT set
[ 3998.188] (II) config/udev: ignoring device /dev/tty29 without property ID_INPUT set
[ 3998.189] (II) config/udev: ignoring device /dev/tty3 without property ID_INPUT set
[ 3998.190] (II) config/udev: ignoring device /dev/tty30 without property ID_INPUT set
[ 3998.190] (II) config/udev: ignoring device /dev/tty31 without property ID_INPUT set
[ 3998.191] (II) config/udev: ignoring device /dev/tty32 without property ID_INPUT set
[ 3998.191] (II) config/udev: ignoring device /dev/tty33 without property ID_INPUT set
[ 3998.192] (II) config/udev: ignoring device /dev/tty34 without property ID_INPUT set
[ 3998.192] (II) config/udev: ignoring device /dev/tty35 without property ID_INPUT set
[ 3998.193] (II) config/udev: ignoring device /dev/tty36 without property ID_INPUT set
[ 3998.194] (II) config/udev: ignoring device /dev/tty37 without property ID_INPUT set
[ 3998.194] (II) config/udev: ignoring device /dev/tty38 without property ID_INPUT set
[ 3998.195] (II) config/udev: ignoring device /dev/tty39 without property ID_INPUT set
[ 3998.196] (II) config/udev: ignoring device /dev/tty4 without property ID_INPUT set
[ 3998.196] (II) config/udev: ignoring device /dev/tty40 without property ID_INPUT set
[ 3998.197] (II) config/udev: ignoring device /dev/tty41 without property ID_INPUT set
[ 3998.198] (II) config/udev: ignoring device /dev/tty42 without property ID_INPUT set
[ 3998.198] (II) config/udev: ignoring device /dev/tty43 without property ID_INPUT set
[ 3998.199] (II) config/udev: ignoring device /dev/tty44 without property ID_INPUT set
[ 3998.199] (II) config/udev: ignoring device /dev/tty45 without property ID_INPUT set
[ 3998.200] (II) config/udev: ignoring device /dev/tty46 without property ID_INPUT set
[ 3998.201] (II) config/udev: ignoring device /dev/tty47 without property ID_INPUT set
[ 3998.201] (II) config/udev: ignoring device /dev/tty48 without property ID_INPUT set
[ 3998.202] (II) config/udev: ignoring device /dev/tty49 without property ID_INPUT set
[ 3998.203] (II) config/udev: ignoring device /dev/tty5 without property ID_INPUT set
[ 3998.203] (II) config/udev: ignoring device /dev/tty50 without property ID_INPUT set
[ 3998.204] (II) config/udev: ignoring device /dev/tty51 without property ID_INPUT set
[ 3998.204] (II) config/udev: ignoring device /dev/tty52 without property ID_INPUT set
[ 3998.205] (II) config/udev: ignoring device /dev/tty53 without property ID_INPUT set
[ 3998.206] (II) config/udev: ignoring device /dev/tty54 without property ID_INPUT set
[ 3998.206] (II) config/udev: ignoring device /dev/tty55 without property ID_INPUT set
[ 3998.207] (II) config/udev: ignoring device /dev/tty56 without property ID_INPUT set
[ 3998.207] (II) config/udev: ignoring device /dev/tty57 without property ID_INPUT set
[ 3998.208] (II) config/udev: ignoring device /dev/tty58 without property ID_INPUT set
[ 3998.208] (II) config/udev: ignoring device /dev/tty59 without property ID_INPUT set
[ 3998.209] (II) config/udev: ignoring device /dev/tty6 without property ID_INPUT set
[ 3998.210] (II) config/udev: ignoring device /dev/tty60 without property ID_INPUT set
[ 3998.210] (II) config/udev: ignoring device /dev/tty61 without property ID_INPUT set
[ 3998.211] (II) config/udev: ignoring device /dev/tty62 without property ID_INPUT set
[ 3998.211] (II) config/udev: ignoring device /dev/tty63 without property ID_INPUT set
[ 3998.212] (II) config/udev: ignoring device /dev/tty7 without property ID_INPUT set
[ 3998.213] (II) config/udev: ignoring device /dev/tty8 without property ID_INPUT set
[ 3998.213] (II) config/udev: ignoring device /dev/tty9 without property ID_INPUT set
[ 3998.221] (EE)
[ 3998.221] (EE) Backtrace:
[ 3998.225] (EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x670cf2]
[ 3998.233] (EE) 1: linux-gate.so.1 (?+0x0) [0xb7edfd87]
[ 3998.236] (EE) 2: ? (?+0x0) [0xc0000000]
[ 3998.236] (EE) unw_step failed: unspecified (general) error [-1]
[ 3998.237] (EE)
[ 3998.237] (EE) Segmentation fault at address 0xc0000000
[ 3998.239] (EE)
Fatal server error:
[ 3998.240] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 3998.240] (EE)
[ 3998.240] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3998.241] (EE) Please also check the log file at "log3_0.txt" for additional information.
[ 3998.241] (EE)
[ 3998.261] (EE) Server terminated with error (1). Closing log file.
More information about the xorg
mailing list