XOrg in Debian10/Buster not usable with AMD Duron / Matrox G400

Markus Hiereth post at hiereth.de
Sun Aug 11 20:05:21 UTC 2019


Hello Felix and Xorg team

Felix Miata schrieb am 10. August 2019 um 23:00

> > As I annonced, I made an
> > attempt with disabled DRI option for the video card, i.e. I introduced
> 
> >   Option  "DRI" "False" 
 
> I suppose DRI support is supposed to be auto-detected but maybe is
> not working as expected in your environments.
> https://en.wikipedia.org/wiki/Direct_Rendering_Infrastructure
 
> > in the device section of xorg.conf. The result was that the X server
> > started as expected.  Below the respective logfile.
> 
> > Thus, the problem is solved though I do not know or try to imagine
> > what benefits DRI "Direct rendering infrastructure" might have.
 
> Does this PC with AGP slot and G400 have 4G or more physical RAM? If
> it does not, as I have no AGP slot boards that support more than 2G
> and suspect maybe there exists no such things, for completeness sake
> I would undo the DRI false option and try the non-PAE kernel. See
> here why I make this suggestion:
> https://bugzilla.opensuse.org/show_bug.cgi?id=1118689#c29 Anyway,
> great to know these great old GPUs remain useful for others than
> myself. :-)

The working memory of this PC is 512 Megabyte. I booted it with the
non-PAE kernel and commented out the DRI option. The X server failed
again to start. (Logfile attached)

> ------------------------------------------------------------------------------
> Markus Hiereth composed on 2019-08-10 22:27 (UTC+0200):
> 
> > [  3974.700] (II) MGA(0): VESA VBE DDC supported
> > [  3974.700] (II) MGA(0): VESA VBE DDC Level none
> > [  3974.700] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
> > [  3974.844] (II) MGA(0): VESA VBE DDC read failed
 
> I spotted another unexpected difference. Mine:
> [  1679.533] (II) MGA(0): VESA VBE DDC supported
> [  1679.533] (II) MGA(0): VESA VBE DDC Level 2
> [  1679.533] (II) MGA(0): VESA VBE DDC transfer in appr. 1 sec.
> [  1681.106] (II) MGA(0): VESA VBE DDC read successfully
 
> This suggests to me your problem's root could be in your display's
> EDID. Have you tried with other displays?

I suppose my monitor does not deliver EDID information. It is
remarkably older than yours (2000 versus 2011). From a working
configuration of the system with Debian 8 (it is a dual boot system) I
copied a modeline with adequate settings for this monitor.

Thanks for your additional hints
Markus
-------------- next part --------------
[  2111.172] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[  2111.172] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[  2111.172] Current Operating System: Linux lune 4.19.0-5-686 #1 SMP Debian 4.19.37-5 (2019-06-19) i686
[  2111.172] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-5-686 root=/dev/sda7
[  2111.172] Build Date: 05 March 2019  08:11:12PM
[  2111.172] xorg-server 2:1.20.4-1 (https://www.debian.org/support) 
[  2111.173] Current version of pixman: 0.36.0
[  2111.173] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2111.173] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2111.173] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 11 19:42:57 2019
[  2111.174] (==) Using config file: "/etc/X11/xorg.conf"
[  2111.174] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2111.175] (==) ServerLayout "X.org Configured"
[  2111.175] (**) |-->Screen "Screen0" (0)
[  2111.175] (**) |   |-->Monitor "Monitor0"
[  2111.177] (**) |   |-->Device "Card0"
[  2111.177] (**) |-->Input Device "Mouse0"
[  2111.177] (**) |-->Input Device "Keyboard0"
[  2111.177] (==) Automatically adding devices
[  2111.177] (==) Automatically enabling devices
[  2111.177] (==) Automatically adding GPU devices
[  2111.178] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2111.178] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  2111.178] 	Entry deleted from font path.
[  2111.178] (**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[  2111.178] (**) ModulePath set to "/usr/lib/xorg/modules"
[  2111.178] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  2111.178] (WW) Disabling Mouse0
[  2111.178] (WW) Disabling Keyboard0
[  2111.178] (II) Loader magic: 0x75c740
[  2111.178] (II) Module ABI versions:
[  2111.178] 	X.Org ANSI C Emulation: 0.4
[  2111.178] 	X.Org Video Driver: 24.0
[  2111.178] 	X.Org XInput driver : 24.1
[  2111.178] 	X.Org Server Extension : 10.0
[  2111.184] (++) using VT number 7

[  2111.184] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  2111.187] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2111.198] (--) PCI:*(1 at 0:0:0) 102b:0525:102b:19d8 rev 4, Mem @ 0xdc000000/33554432, 0xdfefc000/16384, 0xdf000000/8388608, BIOS @ 0x????????/131072
[  2111.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  2111.198] (II) LoadModule: "glx"
[  2111.200] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2111.207] (II) Module glx: vendor="X.Org Foundation"
[  2111.207] 	compiled for 1.20.4, module version = 1.0.0
[  2111.207] 	ABI class: X.Org Server Extension, version 10.0
[  2111.207] (II) LoadModule: "mga"
[  2111.207] (II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
[  2111.208] (II) Module mga: vendor="X.Org Foundation"
[  2111.208] 	compiled for 1.20.4, module version = 2.0.0
[  2111.208] 	Module class: X.Org Video Driver
[  2111.208] 	ABI class: X.Org Video Driver, version 24.0
[  2111.208] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
	mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
	mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200 eW3 Nuvoton,
	mgag200eH, mgag200eH3, mgag400, mgag550
[  2111.209] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[  2111.209] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[  2111.219] (II) Loading sub module "vgahw"
[  2111.219] (II) LoadModule: "vgahw"
[  2111.219] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  2111.220] (II) Module vgahw: vendor="X.Org Foundation"
[  2111.220] 	compiled for 1.20.4, module version = 0.1.0
[  2111.220] 	ABI class: X.Org Video Driver, version 24.0
[  2111.220] (--) MGA(0): Chipset: "mgag400" (G400)
[  2111.221] xf86TokenToOptinfo: table is NULL
[  2111.221] xf86TokenToOptinfo: table is NULL
[  2111.221] (==) MGA(0): Using HW cursor
[  2111.221] (--) MGA(0): Linear framebuffer at 0xDC000000
[  2111.221] (--) MGA(0): MMIO registers at 0xDFEFC000
[  2111.221] (--) MGA(0): Pseudo-DMA transfer window at 0xDF000000
[  2111.226] (II) MGA(0): MAPPED Framebuffer DC000000 2000000 to B5266000.
[  2111.226] (II) MGA(0): UNMAPPING framebuffer 0xB5266000, 0x2000000.
[  2111.228] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
[  2111.228] (==) MGA(0): RGB weight 888
[  2111.228] (==) MGA(0): Using AGP 1x mode
[  2111.228] (==) MGA(0): Using EXA acceleration
[  2111.228] (II) Loading sub module "exa"
[  2111.228] (II) LoadModule: "exa"
[  2111.229] (II) Loading /usr/lib/xorg/modules/libexa.so
[  2111.234] (II) Module exa: vendor="X.Org Foundation"
[  2111.234] 	compiled for 1.20.4, module version = 2.6.0
[  2111.234] 	ABI class: X.Org Video Driver, version 24.0
[  2111.235] (--) MGA(0): Video BIOS info block at offset 0x07CE0
[  2111.235] (==) MGA(0): VideoRAM: 16384 kByte
[  2111.235] (II) Loading sub module "ddc"
[  2111.235] (II) LoadModule: "ddc"
[  2111.235] (II) Module "ddc" already built-in
[  2111.235] (II) Loading sub module "i2c"
[  2111.235] (II) LoadModule: "i2c"
[  2111.235] (II) Module "i2c" already built-in
[  2111.236] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B624A000.
[  2111.236] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[  2111.337] (II) MGA(0): I2C bus "DDC P1" initialized.
[  2111.338] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
[  2112.126] (--) MGA(0): No DDC signal
[  2112.126] (II) Loading sub module "vbe"
[  2112.126] (II) LoadModule: "vbe"
[  2112.127] (II) Loading /usr/lib/xorg/modules/libvbe.so
[  2112.127] (II) Module vbe: vendor="X.Org Foundation"
[  2112.127] 	compiled for 1.20.4, module version = 1.1.0
[  2112.128] 	ABI class: X.Org Video Driver, version 24.0
[  2112.128] (II) Loading sub module "int10"
[  2112.128] (II) LoadModule: "int10"
[  2112.128] (II) Loading /usr/lib/xorg/modules/libint10.so
[  2112.129] (II) Module int10: vendor="X.Org Foundation"
[  2112.129] 	compiled for 1.20.4, module version = 1.0.0
[  2112.129] 	ABI class: X.Org Video Driver, version 24.0
[  2112.129] (II) MGA(0): initializing int10
[  2112.131] (II) MGA(0): Primary V_BIOS segment is: 0xc000
[  2112.132] (II) MGA(0): VESA BIOS detected
[  2112.132] (II) MGA(0): VESA VBE Version 3.0
[  2112.132] (II) MGA(0): VESA VBE Total Mem: 16384 kB
[  2112.132] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
[  2112.132] (II) MGA(0): VESA VBE OEM Software Rev: 2.1
[  2112.132] (II) MGA(0): VESA VBE OEM Vendor: Matrox
[  2112.133] (II) MGA(0): VESA VBE OEM Product: Matrox G400
[  2112.133] (II) MGA(0): VESA VBE OEM Product Rev: 00
[  2112.278] (II) MGA(0): VESA VBE DDC supported
[  2112.278] (II) MGA(0): VESA VBE DDC Level none
[  2112.278] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
[  2112.423] (II) MGA(0): VESA VBE DDC read failed
[  2112.435] (II) MGA(0): UNMAPPING framebuffer 0xB624A000, 0x1000000.
[  2112.436] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[  2112.436] (==) MGA(0): Min pixel clock is 17 MHz
[  2112.436] (--) MGA(0): Max pixel clock is 300 MHz
[  2112.436] (II) MGA(0): Monitor0: Using hsync value of 48.36 kHz
[  2112.436] (II) MGA(0): Monitor0: Using vrefresh value of 60.00 Hz
[  2112.436] (WW) MGA(0): Unable to estimate virtual size
[  2112.436] (II) MGA(0): Clock range:  17.75 to 300.00 MHz
[  2112.436] (II) MGA(0): Not using default mode "640x350" (hsync out of range)
[  2112.436] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[  2112.436] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[  2112.436] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[  2112.436] (II) MGA(0): Not using default mode "720x400" (hsync out of range)
[  2112.436] (II) MGA(0): Not using default mode "360x200" (hsync out of range)
[  2112.436] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[  2112.436] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[  2112.437] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[  2112.437] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[  2112.437] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "320x240" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[  2112.437] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[  2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "400x300" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "1024x768i" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "512x384i" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[  2112.437] (II) MGA(0): Not using default mode "512x384" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.439] (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "832x624" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "416x312" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[  2112.440] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "576x432" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1360x768" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "680x384" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1360x768" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "680x384" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "700x525" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1440x900" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "720x450" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1600x1024" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "800x512" (hsync out of range)
[  2112.441] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[  2112.442] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "2048x1536" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[  2112.442] (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[  2112.442] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[  2112.442] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[  2112.442] (II) MGA(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[  2112.443] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[  2112.443] (II) MGA(0): Not using default mode "720x405" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[  2112.443] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[  2112.443] (II) MGA(0): Not using default mode "864x486" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan)
[  2112.443] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "480x270" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "480x270" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "512x288" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "512x288" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "640x360" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "1368x768" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "684x384" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "1368x768" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "684x384" (hsync out of range)
[  2112.443] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "800x450" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "1920x1080" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "960x540" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "2048x1152" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "1024x576" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "2560x1440" (unknown reason)
[  2112.444] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[  2112.444] (II) MGA(0): Not using default mode "1280x720" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[  2112.444] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "2880x1620" (insufficient memory for mode)
[  2112.444] (II) MGA(0): Not using default mode "1440x810" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[  2112.444] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "3200x1800" (insufficient memory for mode)
[  2112.444] (II) MGA(0): Not using default mode "1600x900" (hsync out of range)
[  2112.444] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "1920x1080" (unknown reason)
[  2112.445] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[  2112.445] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[  2112.445] (II) MGA(0): Not using default mode "4096x2304" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[  2112.445] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[  2112.445] (II) MGA(0): Not using default mode "5120x2880" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[  2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "3840x2160" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "15360x8640" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "7680x4320" (insufficient memory for mode)
[  2112.445] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[  2112.445] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[  2112.445] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "640x400" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "1400x900" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "700x450" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "840x525" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "960x600" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "2560x1600" (unknown reason)
[  2112.446] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[  2112.446] (II) MGA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
[  2112.446] (II) MGA(0): Not using default mode "1280x800" (hsync out of range)
[  2112.447] (II) MGA(0): Virtual size is 1024x768 (pitch 1024)
[  2112.447] (**) MGA(0): *Mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[  2112.447] (II) MGA(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz z)
[  2112.447] (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[  2112.447] (II) MGA(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[  2112.447] (==) MGA(0): DPI set to (96, 96)
[  2112.447] (II) MGA(0): YDstOrg is set to 0
[  2112.447] (II) Loading sub module "fb"
[  2112.447] (II) LoadModule: "fb"
[  2112.447] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2112.448] (II) Module fb: vendor="X.Org Foundation"
[  2112.448] 	compiled for 1.20.4, module version = 1.0.0
[  2112.448] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2112.448] (II) Loading sub module "ramdac"
[  2112.448] (II) LoadModule: "ramdac"
[  2112.449] (II) Module "ramdac" already built-in
[  2112.449] (II) MGA(0): MAPPED Framebuffer DC000000 1000000 to B622E000.
[  2112.450] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[  2112.544] (--) MGA(0): 16 DWORD fifo
[  2112.557] (==) MGA(0): Default visual is TrueColor
[  2112.558] (II) MGA(0): [drm] bpp: 32 depth: 24
[  2112.558] (II) MGA(0): [drm] Sarea 2200+664: 2864
[  2112.558] drmOpenDevice: node name is /dev/dri/card0
[  2112.558] drmOpenDevice: open result is 14, (OK)
[  2112.558] drmOpenDevice: node name is /dev/dri/card0
[  2112.558] drmOpenDevice: open result is 14, (OK)
[  2112.558] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  2112.558] drmOpenDevice: node name is /dev/dri/card0
[  2112.558] drmOpenDevice: open result is 14, (OK)
[  2112.559] drmOpenByBusid: drmOpenMinor returns 14
[  2112.559] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  2112.559] (II) [drm] DRM interface version 1.4
[  2112.559] (II) [drm] DRM open master succeeded.
[  2112.559] (II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
[  2112.559] (II) MGA(0): [drm] framebuffer handle = 0xdc000000
[  2112.559] (II) MGA(0): [drm] added 1 reserved context for kernel
[  2112.559] (II) MGA(0): X context handle = 0x1
[  2112.559] (EE) MGA(0): [drm] failed to setup DRM signal handler
[  2112.559] (EE) MGA(0): [drm] DRIScreenInit failed.  Disabling DRI.
[  2112.560] (II) MGA(0): X 1024 Y 768 bpp 32
[  2112.560] (II) MGA(0): Start at 0xb622e000, size ffec00, osb 301000
[  2112.560] (II) EXA(0): Offscreen pixmap area of 13622272 bytes
[  2112.560] (II) EXA(0): Driver registered support for the following operations:
[  2112.560] (II)         Solid
[  2112.560] (II)         Copy
[  2112.560] (II)         Composite (RENDER acceleration)
[  2112.560] (II)         UploadToScreen
[  2112.560] (==) MGA(0): Backing store enabled
[  2112.560] (==) MGA(0): Silken mouse enabled
[  2112.561] (==) MGA(0): DPMS enabled
[  2112.561] (II) MGA(0): Using overlay video
[  2112.561] (WW) MGA(0): Direct rendering disabled
[  2112.561] (II) Initializing extension Generic Event Extension
[  2112.563] (II) Initializing extension SHAPE
[  2112.564] (II) Initializing extension MIT-SHM
[  2112.565] (II) Initializing extension XInputExtension
[  2112.567] (II) Initializing extension XTEST
[  2112.568] (II) Initializing extension BIG-REQUESTS
[  2112.570] (II) Initializing extension SYNC
[  2112.571] (II) Initializing extension XKEYBOARD
[  2112.573] (II) Initializing extension XC-MISC
[  2112.574] (II) Initializing extension SECURITY
[  2112.575] (II) Initializing extension XFIXES
[  2112.576] (II) Initializing extension RENDER
[  2112.578] (II) Initializing extension RANDR
[  2112.580] (II) Initializing extension COMPOSITE
[  2112.582] (II) Initializing extension DAMAGE
[  2112.583] (II) Initializing extension MIT-SCREEN-SAVER
[  2112.584] (II) Initializing extension DOUBLE-BUFFER
[  2112.586] (II) Initializing extension RECORD
[  2112.587] (II) Initializing extension DPMS
[  2112.588] (II) Initializing extension Present
[  2112.589] (II) Initializing extension DRI3
[  2112.589] (II) Initializing extension X-Resource
[  2112.591] (II) Initializing extension XVideo
[  2112.592] (II) Initializing extension XVideo-MotionCompensation
[  2112.592] (II) Initializing extension SELinux
[  2112.592] (II) SELinux: Disabled on system
[  2112.592] (II) Initializing extension GLX
[  2112.593] (II) AIGLX: Screen 0 is not DRI2 capable
[  2112.791] (II) IGLX: Loaded and initialized swrast
[  2112.791] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  2112.791] (II) Initializing extension XFree86-VidModeExtension
[  2112.793] (II) Initializing extension XFree86-DGA
[  2112.794] (II) Initializing extension XFree86-DRI
[  2112.795] (II) Initializing extension DRI2
[  2113.141] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  2113.141] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2113.141] (II) LoadModule: "evdev"
[  2113.142] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2113.144] (II) Module evdev: vendor="X.Org Foundation"
[  2113.144] 	compiled for 1.20.1, module version = 2.10.6
[  2113.144] 	Module class: X.Org XInput Driver
[  2113.144] 	ABI class: X.Org XInput driver, version 24.1
[  2113.145] (II) Using input driver 'evdev' for 'Power Button'
[  2113.145] (**) Power Button: always reports core events
[  2113.145] (**) evdev: Power Button: Device: "/dev/input/event4"
[  2113.145] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2113.146] (--) evdev: Power Button: Found keys
[  2113.146] (II) evdev: Power Button: Configuring as keyboard
[  2113.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[  2113.146] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2113.146] (**) Option "xkb_rules" "evdev"
[  2113.146] (**) Option "xkb_model" "pc105"
[  2113.146] (**) Option "xkb_layout" "de"
[  2113.282] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  2113.282] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2113.282] (II) Using input driver 'evdev' for 'Power Button'
[  2113.282] (**) Power Button: always reports core events
[  2113.282] (**) evdev: Power Button: Device: "/dev/input/event2"
[  2113.283] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2113.283] (--) evdev: Power Button: Found keys
[  2113.283] (II) evdev: Power Button: Configuring as keyboard
[  2113.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[  2113.283] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  2113.283] (**) Option "xkb_rules" "evdev"
[  2113.283] (**) Option "xkb_model" "pc105"
[  2113.283] (**) Option "xkb_layout" "de"
[  2113.288] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[  2113.288] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  2113.288] (II) Using input driver 'evdev' for 'Sleep Button'
[  2113.288] (**) Sleep Button: always reports core events
[  2113.289] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[  2113.289] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  2113.289] (--) evdev: Sleep Button: Found keys
[  2113.289] (II) evdev: Sleep Button: Configuring as keyboard
[  2113.289] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[  2113.289] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[  2113.289] (**) Option "xkb_rules" "evdev"
[  2113.289] (**) Option "xkb_model" "pc105"
[  2113.290] (**) Option "xkb_layout" "de"
[  2113.296] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2113.296] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2113.296] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  2113.296] (**) AT Translated Set 2 keyboard: always reports core events
[  2113.296] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  2113.297] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  2113.297] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  2113.297] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  2113.297] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  2113.297] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[  2113.297] (**) Option "xkb_rules" "evdev"
[  2113.297] (**) Option "xkb_model" "pc105"
[  2113.297] (**) Option "xkb_layout" "de"
[  2113.302] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[  2113.303] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[  2113.303] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[  2113.303] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[  2113.303] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[  2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[  2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[  2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[  2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[  2113.303] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[  2113.303] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[  2113.303] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[  2113.304] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[  2113.304] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2113.304] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[  2113.304] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[  2113.304] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[  2113.305] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[  2113.305] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[  2113.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[  2113.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[  2113.309] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[  2113.309] (II) No input driver specified, ignoring this device.
[  2113.309] (II) This device may have been added with another device file.
[  2113.312] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  2113.312] (II) No input driver specified, ignoring this device.
[  2113.312] (II) This device may have been added with another device file.
[  2113.347] (EE) 
[  2113.347] (EE) Backtrace:
[  2113.348] (EE) 0: /usr/lib/xorg/Xorg (OsLookupColor+0x122) [0x68ecf2]
[  2113.353] (EE) 1: linux-gate.so.1 (?+0x0) [0xb7ee1d57]
[  2113.355] (EE) 2: ? (?+0x0) [0xc0000000]
[  2113.356] (EE) unw_step failed: unspecified (general) error [-1]
[  2113.356] (EE) 
[  2113.356] (EE) Segmentation fault at address 0xc0000000
[  2113.356] (EE) 
Fatal server error:
[  2113.356] (EE) Caught signal 11 (Segmentation fault). Server aborting
[  2113.356] (EE) 
[  2113.356] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  2113.356] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  2113.357] (EE) 
[  2113.374] (EE) Server terminated with error (1). Closing log file.


More information about the xorg mailing list