XRANDR outputs
Russell Shaw
rjshaw at netspace.net.au
Mon Oct 14 23:53:25 PDT 2013
Hi,
After a system upgrade, xrandr no longer reports two monitors connected to the
video card. I get:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200
default connected 1600x1200+0+0 0mm x 0mm
1600x1200 0.0*
1280x1024 0.0
1152x864 0.0
1024x768 0.0
800x600 0.0
640x480 0.0
720x400 0.0
Both monitors (one DVI, other VGA) are showing the same image, but the second
monitor can't handle 1600x1200.
On debian/unstable i have:
libdrm-radeon1:i386 2.4.46-3 i386
Userspace interface to radeon-specific kernel DRM services -- runtime
xserver-xorg-video-radeon 1:7.2.0-1+b2 i386
X.Org X server -- AMD/ATI Radeon display driver
xrandr 1.4
lspci -vv
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610
[Radeon HD 2400 PRO/XT] (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device 2190
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
More information about the xorg
mailing list