Elo touch issue

[Peter Hutterer]

On Sat, Mar 23, 2013 at 06:17:28PM +0100, Claude Vittoria wrote:
> Dear,
> 
> I work on debian sid kernel 3.2.0-4-686-pae #1 SMP Debian 3.2.39-2 i686
> GNU/Linux
> 
> I got an issue with a
>  Elo TouchSystems 2515 iTouch Plus USB Touchmonitor
> 
> The evtest seems to be fine (appendix 1) but I can not calibrate it...
> 
> xinput_calibrator does not take second input.
> 
> I tried with xinput to inverse axes in all combinations. I m trying some
> conf with the transformation matrix without success. When I test with
> xinput test, I get only the state of button 1, no position.
> 
> I don't find the correct parameters to used this touchscreen. If someone
> has  configured with success this device, please share your configuration.
> 
> Thanks,
> =============appendix 1
> Input driver version is 1.0.1
> Input device ID: bus 0x3 vendor 0x4e7 product 0x126 version 0x1
> Input device name: "Elo TouchSystems 2515 iTouch Plus USB Touchmonitor"
> Supported events:
>   Event type 0 (EV_SYN)
>   Event type 1 (EV_KEY)
>     Event code 330 (BTN_TOUCH)
>   Event type 3 (EV_ABS)
>     Event code 0 (ABS_X)
>       Value      0
>       Min        0
>       Max        0
>     Event code 1 (ABS_Y)
>       Value      0
>       Min        0
>       Max        0
>     Event code 53 (ABS_MT_POSITION_X)
>       Value      0
>       Min       51
>       Max     4080
>     Event code 54 (ABS_MT_POSITION_Y)
>       Value      0
>       Min       87
>       Max     4080
> Properties:
> Testing ... (interrupt to exit)
> Event: time 1364046762.769290, type 3 (EV_ABS), code 53
> (ABS_MT_POSITION_X), value 2850
> Event: time 1364046762.769291, type 3 (EV_ABS), code 54
> (ABS_MT_POSITION_Y), value 1329
> Event: time 1364046762.769292, type 1 (EV_KEY), code 330 (BTN_TOUCH), value
> 1
> Event: time 1364046762.769293, ++++++++++++++ SYN_MT_REPORT ++++++++++++

please record the device with evemu, attach the recordings to a bug and
assign it to me.
http://wiki.freedesktop.org/wiki/Evemu

Cheers,
   Peter