Elo touch issue
Claude Vittoria
claude.vittoria at gmail.com
Sat Mar 23 10:17:28 PDT 2013
Dear,
I work on debian sid kernel 3.2.0-4-686-pae #1 SMP Debian 3.2.39-2 i686
GNU/Linux
I got an issue with a
Elo TouchSystems 2515 iTouch Plus USB Touchmonitor
The evtest seems to be fine (appendix 1) but I can not calibrate it...
xinput_calibrator does not take second input.
I tried with xinput to inverse axes in all combinations. I m trying some
conf with the transformation matrix without success. When I test with
xinput test, I get only the state of button 1, no position.
I don't find the correct parameters to used this touchscreen. If someone
has configured with success this device, please share your configuration.
Thanks,
=============appendix 1
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x4e7 product 0x126 version 0x1
Input device name: "Elo TouchSystems 2515 iTouch Plus USB Touchmonitor"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 330 (BTN_TOUCH)
Event type 3 (EV_ABS)
Event code 0 (ABS_X)
Value 0
Min 0
Max 0
Event code 1 (ABS_Y)
Value 0
Min 0
Max 0
Event code 53 (ABS_MT_POSITION_X)
Value 0
Min 51
Max 4080
Event code 54 (ABS_MT_POSITION_Y)
Value 0
Min 87
Max 4080
Properties:
Testing ... (interrupt to exit)
Event: time 1364046762.769290, type 3 (EV_ABS), code 53
(ABS_MT_POSITION_X), value 2850
Event: time 1364046762.769291, type 3 (EV_ABS), code 54
(ABS_MT_POSITION_Y), value 1329
Event: time 1364046762.769292, type 1 (EV_KEY), code 330 (BTN_TOUCH), value
1
Event: time 1364046762.769293, ++++++++++++++ SYN_MT_REPORT ++++++++++++
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20130323/f2cff405/attachment.html>
More information about the xorg
mailing list