965G, ADD2 HDMI, Toshiba TV: blank screen, X is operational
Nicolas Will
nico at youplala.net
Fri Mar 21 11:43:32 PDT 2008
On Fri, 2008-03-21 at 17:24 +0800, kofboy wrote:
> Nicolas Will,
>
> >Hi all,
> >
> >You may remember me from this summer and my initial trial at this
> using
> >the 2.1 version of the Intel driver
> >
> >After a few months using a binary blob, I have upgraded my OS to the
> >next version. This new release includes a new Xorg and a new Intel
> >driver.
> >
> >So I am trying to go back to my initial plan of using Open Source
> >supported hardware.
> >
> >A quick review of the systems:
> >
> > * Intel DG95WH motherboard
> > * Prolink ADD-7315-DVI-T sDVO/ADD2-N PCI Express x16 card with
> > Composite, S-Video, Components and HDMI outputs - using HDMI
> > * Ubuntu 8.04 "Hardy" 64-bit
> > * Kernel 2.6.24 from Ubuntu
> > * X.Org X Server 1.4.0.90 - Release Date: 5 September 2007 -
> Build
> > Operating System: Linux Ubuntu (xorg-server
> > 2:1.4.1~git20080131-1ubuntu5)
> > * Current Operating System: Linux favia 2.6.24-12-generic #1
> SMP
> > Wed Mar 12 22:31:43 UTC 2008 x86_64 - Build Date: 13 March
> 2008
> > 05:48:21PM
> > * 2.2.1 Intel driver
> > * TV is 1080p capable (works with an nvidia card using the
> ninary
> > blob)
> > * The TV is connected using HDMI to the computer. Nothing else,
> > like a VGA cable, is used
> >
> >The rest of the system is described here:
> >http://www.youplala.net/linux/home-theater-pc
> >
> >I have the following xorg.conf and associated log:
> >
> >http://www.youplala.net/~will/htpc/intel/
> >
> >I hope that the verbose logging is really useful and will not "help"
> by confusing things...
> >
> >
> >Symptoms: I have some text stuff displayed durung boot and shut-down,
> I have X and the applications started, but I have a black screen.
> >
> >
> >I am at a loss at the moment, and I a seeking eyeballs on the config
> and the logs, in the hope to be told than I am a moron and missed
> something.
> >
> >Thanks for your help,
> >
> >Nico
> >
>
>
> try this in your xorg.conf, and post Xorg.0.log.
>
>
>
> Section "Device"
> ...
> Option "monitor-TMDS-1" "MonitorTMDS1"
> Option "IgnoreEDID" "true"
> EndSection
>
> Section "Monitor"
> Identifier "MonitorTMDS1"
> ...
> Modeline "1920x1080 at 60hz" 148.352 1920 1960
> 2016 2200 1080 1082 1088 1125 +hsync +vsync
> Option "IgnoreEDID" "true"
> Option "PreferredMode" "1920x1080 at 60hz"
> EndSection
Thanks for the time spent looking at this and replying.
I have done the modifications.
I have the same result, X is started, I can use the application using my
remote control, but no picture.
New conf and logs here:
http://www.youplala.net/~will/htpc/intel/test-1/
Ignore EDID sounds deprecated.
Nico
More information about the xorg
mailing list