X will not restart once started
Linux
linux at thehoytfamily.com
Tue Aug 19 04:36:11 PDT 2008
Fixed problem by installing latest Kernel from kernel.org
Linux wrote:
> X will not restart once it is started. Not sure where to look for the
> problem.
>
> Symptoms:
> If I use Red Hat Graphical Boot - then X won't start. System freezes or
> I just get a cursor.
> If I don't use Red Hat Graphical Boot, then X starts fine, but if I log
> out and GDM is restarted (X restarted) it will hang.
>
> It appears that whenever it leaves a graphical mode, it leaves the video
> subsystem in an unusable mode. A reset fixes it but I can only enter the
> graphical mode once.
>
> I am using Red Hat - Fedora Core 9 - Issued a "yum update" to update all
> packages
> Motherboard is Intel DG31PR
> Video is Intel 82G33/G31 Express (on mother board) and nVidia NV43
> (GeForce 6600)
>
> Problem exists whether I use "intel", "nv" or "vesa" and whether or not
> I have the nVidia card in or out.
>
> Related error that I am seeing but I see it whether it works or not:
> Aug 17 20:27:25 sun kernel: mtrr: type mismatch for d0000000,10000000
> old: write-back new: write-combining
>
> lspci:
> 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
> Controller (rev 10)
> 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI
> Express Root Port (rev 10)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 1 (rev 01)
> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 2 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
> Controller (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
> SATA IDE Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
> (rev 01)
> 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce
> 6600] (rev a2)
> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
>
> # Xorg configuration created by pyxf86config
>
> Section "ServerLayout"
> Identifier "Single Head Layout"
> Screen 0 "nVidia Screen" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "InputDevice"
> # keyboard added by rhpxl
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> EndSection
>
> Section "Device"
> Identifier "Intel Corporation 82G33/G31"
> BusID "PCI:0:2:0"
> Driver "intel"
> Option "ExaNoComposite" "true"
> EndSection
>
> Section "Device"
> Identifier "nVidia Corporation NV43"
> BusID "PCI:1:0:0"
> Driver "nv"
> EndSection
>
> Section "Device"
> Identifier "nVidia VESA"
> BusID "PCI:1:0:0"
> Driver "vesa"
> EndSection
>
> Section "Screen"
> Identifier "nVidia Screen"
> Device "nVidia Corporation NV43"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1024x768"
> EndSubSection
> EndSection
>
> Section "Screen"
> Identifier "nVidia VESA Screen"
> Device "nVidia VESA"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1024x768"
> EndSubSection
> EndSection
>
> Section "Screen"
> Identifier "Intel Screen"
> Device "Intel Corporation 82G33/G31"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> Warnings in the log file:
> (II) Loading /usr/lib/xorg/modules//libint10.so
> (II) Module int10: vendor="X.Org Foundation"
> compiled for 1.4.99.905, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) NV(0): Initializing int10
> (WW) NV(0): Bad V_BIOS checksum
> (II) NV(0): Primary V_BIOS segment is: 0xc000
> (--) NV(0): Chipset: "GeForce 6600"
> (**) NV(0): Depth 24, (--) framebuffer bpp 32
> (==) NV(0): RGB weight 888
> (==) NV(0): Default visual is TrueColor
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
>
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (II) AIGLX: Screen 0 is not DRI2 capable
> (II) AIGLX: Screen 0 is not DRI capable
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (**) Option "CoreKeyboard"
> (**) Keyboard0: always reports core events
> (**) Option "Protocol" "standard"
> (**) Keyboard0: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) Keyboard0: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) Keyboard0: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) Keyboard0: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**) Keyboard0: CustomKeycodes disabled
> (WW) <default pointer>: No Device specified, looking for one...
> (II) <default pointer>: Setting Device option to "/dev/input/mice"
> (--) <default pointer>: Device: "/dev/input/mice"
> (==) <default pointer>: Protocol: "Auto"
> (**) Option "CorePointer"
> (**) <default pointer>: always reports core events
> (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
> (**) <default pointer>: ZAxisMapping: buttons 4 and 5
> (**) <default pointer>: Buttons: 9
> (**) <default pointer>: Sensitivity: 1
> (II) evaluating device (<default pointer>)
> (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
> (II) evaluating device (Keyboard0)
> (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
> (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
> (II) <default pointer>: ps2EnableDataReporting: succeeded
> (II) config/hal: Adding input device Macintosh mouse button emulation
> (II) LoadModule: "evdev"
>
>
>
>
>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>
More information about the xorg
mailing list