X will not restart once started
Linux
linux at thehoytfamily.com
Sun Aug 17 22:36:16 PDT 2008
X will not restart once it is started. Not sure where to look for the
problem.
Symptoms:
If I use Red Hat Graphical Boot - then X won't start. System freezes or
I just get a cursor.
If I don't use Red Hat Graphical Boot, then X starts fine, but if I log
out and GDM is restarted (X restarted) it will hang.
It appears that whenever it leaves a graphical mode, it leaves the video
subsystem in an unusable mode. A reset fixes it but I can only enter the
graphical mode once.
I am using Red Hat - Fedora Core 9 - Issued a "yum update" to update all
packages
Motherboard is Intel DG31PR
Video is Intel 82G33/G31 Express (on mother board) and nVidia NV43
(GeForce 6600)
Problem exists whether I use "intel", "nv" or "vesa" and whether or not
I have the nVidia card in or out.
Related error that I am seeing but I see it whether it works or not:
Aug 17 20:27:25 sun kernel: mtrr: type mismatch for d0000000,10000000
old: write-back new: write-combining
lspci:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI
Express Root Port (rev 10)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce
6600] (rev a2)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
# Xorg configuration created by pyxf86config
Section "ServerLayout"
Identifier "Single Head Layout"
Screen 0 "nVidia Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Intel Corporation 82G33/G31"
BusID "PCI:0:2:0"
Driver "intel"
Option "ExaNoComposite" "true"
EndSection
Section "Device"
Identifier "nVidia Corporation NV43"
BusID "PCI:1:0:0"
Driver "nv"
EndSection
Section "Device"
Identifier "nVidia VESA"
BusID "PCI:1:0:0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "nVidia Screen"
Device "nVidia Corporation NV43"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "nVidia VESA Screen"
Device "nVidia VESA"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Intel Screen"
Device "Intel Corporation 82G33/G31"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Warnings in the log file:
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) NV(0): Initializing int10
(WW) NV(0): Bad V_BIOS checksum
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce 6600"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
More information about the xorg
mailing list