Newbie Question
Dan B. Phung
phung at cs.columbia.edu
Wed Apr 23 21:38:05 PDT 2008
First you should try messing with how much you need to shift using
xrandr...if that's available on the device. do something like:
xrandr -s 800x600+50+50
if you don't have xrandr, then try adding the "+50+50" to your
xorg.conf, and messing with the settings till you align your screen.
-dan
Schumi Imor wrote:
> Hello,
> I have an embedded x86 device with a 800x600 LCD monitor (this is
> the maximum hw resolution). I was able to install and run debian with
> xserver-xorg-core and xorg packages on it.
> But when I run X, the screen/window is shifted by 1 inch to the left.
> The same when I run 640x480. But when I run at higher resolutions,
> although I can see the whole screen and will have to move the mouse
> to see all corners, the window edge look fine.
> What setting in the xorg.conf or somewhere else can I change to move
> the windows/screen right by 1 inch? Thanks in advance.
>
> xorg.conf file:
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> RgbPath "/etc/X11/rgb"
> ModulePath "/usr/lib/xorg/modules"
> FontPath "/usr/share/fonts/X11/misc"
> FontPath "/usr/X11R6/lib/X11/fonts/misc"
> FontPath "/usr/share/fonts/X11/cyrillic"
> FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/Type1"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1"
> FontPath "/usr/share/fonts/X11/100dpi"
> FontPath "/usr/share/fonts/X11/75dpi"
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> EndSection
>
> Section "Module"
> Load "extmod"
> Load "record"
> Load "dbe"
> Load "glx"
> Load "xtrap"
> Load "dri"
> Load "type1"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/mouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> #DisplaySize 360 270 # mm
> Identifier "Monitor0"
> VendorName "LCD"
> ModelName " TFT LCD"
> ### Comment all HorizSync and VertSync values to use DDC:
> HorizSync 20.0 - 92.0
> VertRefresh 50.0 - 75.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "SWcursor" # [<bool>]
> #Option "ColorKey" # <i>
> #Option "CacheLines" # <i>
> #Option "Dac6Bit" # [<bool>]
> #Option "DRI" # [<bool>]
> #Option "NoDDC" # [<bool>]
> #Option "ShowCache" # [<bool>]
> #Option "XvMCSurfaces" # <i>
> #Option "PageFlip" # [<bool>]
> Identifier "Card0"
> Driver "i810"
> VendorName "Intel Corporation"
> BoardName "82852/855GM Integrated Graphics Device"
> BusID "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 16
> Modes "800x600"
> EndSubSection
> EndSection
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
More information about the xorg
mailing list