Newbie Question

Schumi Imor schumiimor at gmail.com
Wed Apr 23 21:33:36 PDT 2008


Hello,
  I have an embedded x86 device with a 800x600 LCD monitor (this is the
maximum hw resolution). I was able to install and run debian with
xserver-xorg-core and xorg packages on it.
But when I run X, the screen/window is shifted by 1 inch to the left.  The
same when I run 640x480. But when I run at higher resolutions, although I
can see the whole screen and  will have to move the mouse to see all
corners, the window edge look fine.
What setting in the xorg.conf or somewhere else can I change to move the
windows/screen right by 1 inch? Thanks in advance.

xorg.conf file:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/etc/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "extmod"
        Load  "record"
        Load  "dbe"
        Load  "glx"
        Load  "xtrap"
        Load  "dri"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/mouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        #DisplaySize      360   270     # mm
        Identifier   "Monitor0"
        VendorName   "LCD"
        ModelName    " TFT LCD"
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    20.0 - 92.0
        VertRefresh  50.0 - 75.0
        Option      "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "i810"
        VendorName  "Intel Corporation"
        BoardName   "82852/855GM Integrated Graphics Device"
        BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     16
            Modes "800x600"
        EndSubSection
EndSection
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20080424/7fc1bd71/attachment.html>


More information about the xorg mailing list