Multiseat problem: Unable to initialize the X Int10 module

[Ma Begaj]

Nobody is using Xorg server in a multiseat combination?



2007/6/7, Ma Begaj <derliebegott at gmail.com>:
> Hi,
>
> I set up a multiseat system yesterday and it is working very well.  I
> have two nvidia 7600GS cards, one for a twinview screen with two
> displays, other one for MythTv on Tv-Out.
>
> It's working great and it is stable.
>
> But there is one problem, which I am not able to solve.
>
> I use a lot "suspend to ram" (S3) and it is also working without any
> problems for the first X server. But after waking up, 1st X server is
> OK and I can work on my desktop, but the 2nd X server is "hidden".
>
> That means that the 2nd X server is still running, but there is no
> picture/signal on the TV after waking up.  I checked the logs and this
> is what I found:
> ----------------------------------------------------------------------
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R7/lib/modules/libint10.so
> (II) Attempted to read BIOS 128KB from
> /sys/bus/pci/devices/0000:07:00.0/rom: got 0KB
> Requesting insufficient memory window!: start: 0xf7000000 end:
> 0xf9ffffff size 0x10000000
> (EE) Cannot find empty range to map base to
> (EE) NVIDIA(0): Cannot read V_BIOS
> (EE) NVIDIA(0): Unable to initialize the X Int10 module; the console may not
> (EE) NVIDIA(0):     be restored correctly on your TV.
> ----------------------------------------------------------------------
>
> I think that this might be the reason for non-working recover after
> waking up from suspend to ram.
>
> Do you have some ideas how could I solve this?
>
> Thanks a lot
>


-- 
Glauben heißt nicht wissen wollen, was wahr ist ... Nietzsche