Problem with intel 945G in "twin" mode
Lukas Hejtmanek
xhejtman at fi.muni.cz
Mon May 29 00:17:20 PDT 2006
On Mon, May 29, 2006 at 08:37:54AM +0200, Rohnny Moland wrote:
> So I should specify PCI:0:2:0 on both devices? I have tried that, and
> also tried to add both Screen 0 and Screen 1 as you mention, without
> any luck. The screens are just cloned.
Using attached conf. I'm able to run xinerama. Try it while adjusting screen
sizes.
--
Lukáš Hejtmánek
-------------- next part --------------
# XF86Config-4 (XFree86 X server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "/usr/share/fonts/TrueTypeISO"
FontPath "/usr/share/fonts/TrueTypeSYM"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/lib/X11/fonts/freefont"
FontPath "/usr/lib/X11/fonts/sharefont"
FontPath "/usr/lib/X11/fonts/latin2/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/latin2/Type1"
FontPath "/usr/local/X11R7.0/lib/X11/fonts/misc/:unscaled"
FontPath "/usr/local/X11R7.0/lib/X11/fonts/Type1"
FontPath "/usr/local/X11R7.0/lib/X11/fonts/75dpi/:unscaled"
EndSection
Section "ServerFlags"
NoTrapSignals
# Option "Xinerama" "true"
EndSection
Section "Module"
Load "dri"
Load "glx"
Load "bitmap"
Load "extmod"
Load "freetype"
Load "record"
Load "type1"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "InputDevice"
Identifier "keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us,cz"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp:switch,grp_led:scroll"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Configured Mouse"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "CorePointer"
Option "LeftEdge" "1900"
Option "RightEdge" "5700"
Option "TopEdge" "1900"
Option "BottomEdge" "4000"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.38"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "InputDevice"
Identifier "USB"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
BusID "PCI:0:02:0"
Identifier "Intel915"
Driver "i810"
Option "PageFlip" "yes"
Option "MonitorLayout" "CRT,LFP"
#Option "Clone" "yes"
#Option "CloneRefresh" "70"
Option "CacheLines" "2048"
Screen 0
EndSection
Section "Device"
BusID "PCI:0:02:0"
Identifier "Intel915-1"
Driver "i810"
Option "PageFlip" "yes"
Option "MonitorLayout" "CRT,LFP"
Option "CacheLines" "2048"
Screen 1
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-90
VertRefresh 43-81
Option "DPMS"
#DisplaySize 331 207
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
ModeLine "1280x800" 68.8 1280 1311 1343 1407 800 800 803 815
EndSection
Section "Monitor"
Identifier "Generic Monitor1"
HorizSync 28-190
VertRefresh 43-81
Option "DPMS"
#DisplaySize 331 207
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
#ModeLine "1280x800" 83.5 1280 1311 1343 1407 800 800 803 815
Modeline "1920x1200" 192.16 1920 2047 2255 2591 1200 1200 1203 1241 -hsync +vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel915"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "Screen"
Identifier "Default Screen1"
Device "Intel915-1"
Monitor "Generic Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1200"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen"
Screen 1 "Default Screen1" RightOf "Default Screen"
InputDevice "keyboard0"
InputDevice "Configured Mouse"
InputDevice "USB" "AlwaysCore"
Option "Xinerama" "true"
EndSection
More information about the xorg
mailing list