[Fwd: clone to tv not working]
Dan Robb
dan at tradegrp.com
Tue Feb 7 06:32:35 PST 2006
Thanks for getting back to me.
Here is the /var/log/Xorg.0.log file.
Dan
Stuart Kreitman wrote:
> please attach /var/log/Xorg.0.log file.
>
> thanks,
>
> skk
>
> Dan Robb wrote:
>
>> I sent this out last week but didn't get a response so I'm resending
>> it. If this is not the correct forum for this topic and you know
>> what the correct forum is could you please let me know so I don't clog
>> up the list?
>>
>> Thanks,
>>
>> Dan
>>
>> -------- Original Message --------
>> Subject: clone to tv not working
>> Date: Wed, 01 Feb 2006 11:58:12 -0600
>> From: Dan Robb <dan at tradegrp.com>
>> Reply-To: dan at tradegrp.com
>> To: xorg at lists.freedesktop.org
>>
>> I have a Dell workstation running Solaris 10 (s10_74 i86pc) with X
>> Window System Version 6.8.0 (Sun Xorg Release 1.1 for Solaris 10)
>> X Protocol Version 11, Revision 0, Release 6.8
>>
>> Card 0 is a Matrox Graphics MGA G400 AGP rev 133
>> Card 1 is an nVidia Gforce FX 5500 oc. It has an svga out and an
>> S-Video out.
>>
>> I'm trying to have screen 0 run on the nVidia with a clone image sent to
>> a TV via the S-Video port. Screen 1 runs on the Matrox. Screen 0 and
>> Screen 1 are working properly. The clone image on the television I have
>> attached to the S-Video isn't working. The image changes when changes
>> are made to screen0 but it's illegible. It appears as though the
>> horizontal and vertical refresh rates are off. The image looks like a
>> lightening bolt jumping all over the screen. I've tried multiple TVs
>> and the image is illegible on all. I've attached my xorg.conf.
>>
>> Thanks in advance for any assistance. I'll summarize.
>>
>> Dan
>>
>> ------------------------------------------------------------------------
>>
>> Section "ServerLayout"
>> Identifier "X.org Configured"
>> Screen 0 "Screen0" 0 0
>> Screen 1 "Screen1" RightOf "Screen0"
>> InputDevice "Mouse0" "CorePointer"
>> InputDevice "Keyboard0" "CoreKeyboard"
>> EndSection
>>
>> Section "Files"
>> RgbPath "/usr/X11/lib/X11/rgb"
>> ModulePath "/usr/X11/lib/modules"
>> FontPath "/usr/X11/lib/X11/fonts/TrueType/"
>> FontPath "/usr/X11/lib/X11/fonts/Type1/"
>> FontPath "/usr/X11/lib/X11/fonts/Type1/sun/"
>> FontPath "/usr/X11/lib/X11/fonts/F3bitmaps/"
>> FontPath "/usr/X11/lib/X11/fonts/misc/"
>> FontPath "/usr/X11/lib/X11/fonts/100dpi/"
>> FontPath "/usr/X11/lib/X11/fonts/75dpi/"
>> EndSection
>>
>> Section "Module"
>> Load "IA"
>> Load "Xst"
>> Load "dbe"
>> Load "extmod"
>> Load "record"
>> Load "xtrap"
>> Load "glx"
>> Load "bitstream"
>> Load "type1"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Keyboard0"
>> Driver "keyboard"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Mouse0"
>> Driver "mouse"
>> Option "Protocol" "auto"
>> Option "Device" "/dev/mouse"
>> EndSection
>>
>> Section "Monitor"
>> Identifier "Monitor0"
>> VendorName "Monitor Vendor"
>> ModelName "Monitor Model"
>> EndSection
>>
>> Section "Monitor"
>> #DisplaySize 380 310 # mm
>> Identifier "Monitor1"
>> VendorName "DEL"
>> ModelName "DELL 1905FP"
>> ### Uncomment if you don't want to default to DDC:
>> # HorizSync 1380206208.0 - 0.0
>> # HorizSync 30.0 - 81.0
>> # VertRefresh 825308736.0 - 0.0
>> Option "DPMS"
>> EndSection
>>
>> Section "Device"
>> Identifier "Card0"
>> Driver "nvidia"
>> VendorName "nVidia Corporation"
>> BoardName "Unknown Board"
>> BusID "PCI:2:3:0"
>> Option "Xinerama" "off"
>> # Option "MetaModes" "800x600,800x600"
>> Option "MetaModes" "1280x1024,800x600"
>> Option "TV" "true"
>> Option "TwinView" "true"
>> Option "TwinViewOrientation" "Clone"
>> Option "TVStandard" "NTSC-M"
>> Option "TVOutFormat" "SVIDEO"
>> Option "SecondMonitorHorizSync" "30-50"
>> Option "SecondMonitorVertRefresh" "60
>> Option "HWCursor" "On"
>> EndSection
>>
>> Section "Device"
>> ### Available Driver options are:-
>> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>> ### [arg]: arg optional
>> #Option "SWcursor" # [<bool>]
>> #Option "HWcursor" # [<bool>]
>> #Option "PciRetry" # [<bool>]
>> #Option "SyncOnGreen" # [<bool>]
>> #Option "NoAccel" # [<bool>]
>> #Option "ShowCache" # [<bool>]
>> #Option "Overlay" # [<str>]
>> #Option "MGASDRAM" # [<bool>]
>> #Option "ShadowFB" # [<bool>]
>> #Option "UseFBDev" # [<bool>]
>> #Option "ColorKey" # <i>
>> #Option "SetMclk" # <freq>
>> #Option "OverclockMem" # [<bool>]
>> #Option "VideoKey" # <i>
>> #Option "Rotate" # [<str>]
>> #Option "TexturedVideo" # [<bool>]
>> #Option "Crtc2Half" # [<bool>]
>> #Option "Crtc2Ram" # <i>
>> #Option "Int10" # [<bool>]
>> #Option "AGPMode" # <i>
>> #Option "AGPSize" # <i>
>> #Option "DigitalScreen1" # [<bool>]
>> #Option "DigitalScreen2" # [<bool>]
>> #Option "TV" # [<bool>]
>> #Option "TVStandard" # [<str>]
>> #Option "CableType" # [<str>]
>> #Option "NoHal" # [<bool>]
>> #Option "SwappedHead" # [<bool>]
>> #Option "DRI" # [<bool>]
>> #Option "MergedFB" # [<bool>]
>> #Option "Monitor2HSync" # [<str>]
>> #Option "Monitor2VRefresh" # [<str>]
>> #Option "Monitor2Position" # [<str>]
>> #Option "MetaModes" # [<str>]
>> Identifier "Card1"
>> Driver "mga"
>> VendorName "Matrox Graphics, Inc."
>> BoardName "MGA G400 AGP"
>> BusID "PCI:3:0:0"
>> EndSection
>>
>> Section "Screen"
>> Identifier "Screen0"
>> Device "Card0"
>> Monitor "Monitor0"
>> SubSection "Display"
>> Viewport 0 0
>> Depth 24
>> Modes "1280x1024" "1024x768" "800x600"
>> EndSubSection
>> EndSection
>>
>> Section "Screen"
>> Identifier "Screen1"
>> Device "Card1"
>> Monitor "Monitor1"
>> SubSection "Display"
>> Viewport 0 0
>> Depth 24
>> Modes "1280x1024" "1024x768" "800x600"
>> EndSubSection
>> EndSection
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> xorg mailing list
>> xorg at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/xorg
>>
>>
>
--
___
_____
________
Daniel P. Robb
TradeGroup
205 N. Michigan Ave.
Suite 1600
Chicago, IL 60601
dan at tradegrp.com
(312) 729-0763 direct
(312) 729-0750 main
(312) 861-0789 fax
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Xorg.0.log
URL: <http://lists.x.org/archives/xorg/attachments/20060207/83f22db3/attachment.ksh>
More information about the xorg
mailing list