:0.1 screen not found on my dual head ATI

[Troy]

> Anyway, I still can't get :0.1 display to work...


You should be trying :1.0, unless my spastic morning  
brain is feeding me hormonas dislexia.


Troy

> 
> On Monday 07 August 2006 11:15, Jonathan Adamczewski wrote:
> >
> > If you are able to drag windows from one to the other, then there is
> > only one display.
> >
> > With proper Xinerama support (which I think fglrx now has), you may have
> > a taskbar that spans only one screen (I think - that's what I recall
> > from last time I was running KDE with a Xinerama setup), but if you can
> > move windows from screen to screen, there is only one display.
> >
> > The log you posted does appear to indicate that the server is running
> > with Xinerama working :
> >
> > (II) fglrx(0): Initialized in-driver Xinerama extension
> >
> >
> > j.
> 
> Thanks for your answer, I got a workaround for this, after reading your 
> e-mail, I tried to add Option "Xinerama" "off" in xorg.conf, and finally I 
> can tell mplayer to display at my second monitor by adding "-geometry 
> +1024+0" at the command line, oddly enough, before I added the "Xinerama" 
> "off" option, mplayer keep showing at my first monitor, which I assume it 
> doesn't even know if I got huge screen... is it because there is a conflict 
> between Xorg's Xinerama and in-driver Xinerama extension??
> 
> Anyway, I still can't get :0.1 display to work...
> 
> As you say, apparently fglrx has internal Xinerama driver, how can I disable 
> it? I mean, I want to create 2 seperate screen which I can tell X 
> applications to use display :0.1...
> 
> I've googling around and found some articles to do this, and I tried to create 
> 2 seperate "Monitor" section and 2 "Device" section like this:
> 
> --------------------------------------------------------------------------
> Section "Device"
> 	Identifier	"Screen0 ATI"
> 	Driver		"ati"
> 	ChipID		0x5835
> 	BusID		"1:5:0"
> 	Option		"DynamicClocks"	"on"
> 	Screen		0
> EndSection
> 
> Section "Device"
> 	Identifier	"Screen1 ATI"
> 	Driver		"ati"
> 	ChipID		0x5835
> 	BusID		"1:5:0"
> 	Option		"DynamicClocks" "on"
> 	Screen		1
> EndSection
> 
> Section "Monitor"
> 	Identifier	"Generic Monitor"
> 	Option		"DPMS"
> EndSection
> 
> Section "Monitor"
> 	Identifier	"Second Monitor"
> 	Option		"DPMS"
> EndSection
> 
> Section "Screen"
> 	Identifier	"Screen0"
> 	Device		"Screen0 ATI"
> 	Monitor		"Generic Monitor"
> 	DefaultDepth	24
> 	SubSection "Display"
> 		Depth		24
> 		Modes		"1024x768"
> 	EndSubSection
> EndSection
> 
> Section "Screen"
> 	Identifier	"Screen1"
> 	Device		"Screen1 ATI"
> 	Monitor		"Second Monitor"
> 	DefaultDepth	24
> 	SubSection "Display"
> 		Depth		24
> 		Modes		"1024x768"
> 	EndSubSection
> EndSection
> 
> Section "ServerLayout"
> 	Identifier	"DefaultLayout"
> 	InputDevice	"Keyboard[0]"	"CoreKeyboard"
> 	InputDevice	"Mouse[1]"	"CorePointer"
> 	InputDevice	"Mouse[3]"	"SendCoreEvents"
> 	Screen		"Screen0"
> 	Screen		"Screen1" RightOf "Screen0"
> EndSection
> --------------------------------------------------------------------------
> 
> What I got is my second monitor is on and I still can't tell xeyes to appear 
> at :0.1 which I got the same display :0.1 not found error...
> 
> Thanks again.
> 
> -- 
> Danny Kurniawan <danny.kurniawan at gmail.com>
> -----BEGIN GEEK CODE BLOCK-----
> Version: 3.12
> GCS/CM/E/IT d+() s+:+ a- C++>+++$ UL+++(++)>++++ P!(+++) L+++>++++>$ E-- W++>$
> N o-- K- w--(+++) O++@ M@ V? PS PE-@ Y+ PGP@ t++ 5+@ X+++(++) R tv+ b
> +++(++) DI? D++@ G+>++ e++ h- r++ y z- 
> ------END GEEK CODE BLOCK------
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>