Does Xorg 6.9/7.0 support the old PCI graphic card S3 Trio64?

[Ma Weimin]

Hi,

my current system is: Mandriva 2006, Xorg 6.9.0 and integrated graphic card 
Intel i810. And it works perfect.

I'm planning to use dual monitors with a sencond graphic cards, which is a 
very old PCI card S3 Trio64. It works on Widnows 98, so there's no problem 
with the card itself. I did exactly following the instructions of xinerama. 
But i failed to get Trio64 to work. Here are the informations.

When I ran "X -configure", i got the this. However, I don't miss the file 
apm_drv.so.
failed load /usr/X11R6/lib/modules/drivers/apm_drv.so
failed to load modules "apm" (loader failed, 7)

When I ran "X -config /root/xorg.conf.new" anyway, such errors could be 
found in "/var/log/X11.0.log" file.
(EE) Cannot shmat() high memory
(EE) shmget error: Invalid argument

I have heard that Xorg 6.7 supports Trio64, but Xorg 6.9 not any more. Is 
that true? Does 7.0 support it? Is there any way to make Trio64 work 
without downgrading Xorg to 6.7?

Any Ideas would be appreciated.

Weimin


Here is the created xorg.conf.new from X -configure.

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
	FontPath     "unix/:-1"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/mouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  310   230	# mm
	Identifier   "Monitor0"
	VendorName   "GSM"
	ModelName    "FLATRON 774FT"
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 70.0
	VertRefresh  50.0 - 160.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
	Identifier  "Card0"
	Driver      "i810"
	VendorName  "Intel Corporation"
	BoardName   "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
	BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DefaultRefresh"     	# [<bool>]
        #Option     "ModeSetClearScreen" 	# [<bool>]
	Identifier  "Card1"
	Driver      "vesa"
	VendorName  "Unknown Vendor"
	BoardName   "Unknown Board"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection