Resize problems with savage and DRI.

[Felix Kühling]

On Sun, 10 Oct 2004 23:19:04 -0400
Alex Deucher <alexdeucher at gmail.com> wrote:

> On Sun, 10 Oct 2004 16:52:26 +0100, Dan Gray <dan at dangray.org> wrote:
> > Hi,
> >   I'm using the savage CVS code and am having problems with resizing the
> > screen.
> > 
> >   Both the standard Crtl-Alt-+ and SDL apps fail to rescale the display
> > properly, with the C-A-+ option leaving corruption at the top and bottom
> > of the screen (clears with I switch back to default 1024x768) and SDL
> > (try Neverball or Tuxracer for an example) fails to resize the screen to
> > lower resolutions, resulting in a strange, corrupt
> > half-display-sort-of-thing.
> > 
> 
> Can you or Felix try again with cvs?  Unfortunately I don't have an
> integrated savage to test on and savage4s don't seem to have the
> problem.

It's still there with latest CVS. I'll try to describe what it looks
like (also see my ASCII drawing below): vertical scaling looks allmost
ok. Only at the top and bottom of the screen there is some garbage (g)
because the scaled image doesn't fill the whole LCD display. It looks
like the top/bottom most pixel line replicated till the edge of the LCD
display. This area used to be black. Horizontal scaling is not taking
place. Instead on the left side of the screen the image is stretched
vertically ((i) and (I)). In remaining space I see a replication of the
middle stripe of the visible image ((I) replacated as (X)).

gggggggggggggggggggggggg
iiiiIIIIIIIIiiiiXXXXXXXX
iiiiIIIIIIIIiiiiXXXXXXXX
iiiiIIIIIIIIiiiiXXXXXXXX
iiiiIIIIIIIIiiiiXXXXXXXX
iiiiIIIIIIIIiiiiXXXXXXXX
iiiiIIIIIIIIiiiiXXXXXXXX
iiiiIIIIIIIIiiiiXXXXXXXX
iiiiIIIIIIIIiiiiXXXXXXXX
gggggggggggggggggggggggg


> 
> >   Also, Xv seems to be glitching, generating vertical lines up and down
> > the screen on high resolution video.
> 
> Xv should work now on savages with the "old" streams engine.  the
> problem was the FIFO was being setup wrong for vertical interpolation.
>  Vertical interpolation is also very bandwidth intensive and one of my
> savages4s isn't up to it, so I've disabled it by default for all "old"
> chips.  It's now available as an XV attribute
> (XV_VERTICAL_INTERPOLATION) you can turn it off and on on the fly. 
> After some testing I may enable it by default on some chipsets.

How can I set Xv attributes? xvinfo can only display it and I couldn't
find a way to make mplayer set custom attributes.

> 
> Thanks,
> 
> Alex
> 

Felix

| Felix Kühling <fxkuehl at gmx.de>                     http://fxk.de.vu |
| PGP Fingerprint: 6A3C 9566 5B30 DDED 73C3  B152 151C 5CC1 D888 E595 |