[Xorg-driver-geode] problems with 1360x768

[Mart Raudsepp]

Ühel kenal päeval, E, 2009-02-09 kell 09:57, kirjutas Christian Goebel:
> On Friday 06 February 2009 19:30:41 Mart Raudsepp wrote:
> > On R, 2009-02-06 at 18:30 +0100, Christian Goebel wrote:
> > > we have some Linutop2 devices with the geode LX800 chipset and
> > > problems to get working it with the Samsung 400MX and 320MX
> displays.
> > > With other devices/chipsets the displays are working correctly.
> > >
> > > We have done a lot of tests with the modeline but everytime the
> same
> > > result: 100-200 pixels from the height are hidden because the
> image is
> > > stretched.
> > >
> > > Does anyone have experience with the resolution 1360x768 on the
> LX800
> > > chipset with the xorg-driver? What can we try/do?
> >
> > Lets start with what version of xorg-server and xf86-video-geode are
> you
> > trying this with?
> > Can you attach your xorg.conf and X log (/var/log/Xorg.0.log)?
> > The necessary versions will be visible from the X log as well.
> >
> >
> > Regards,
> > Mart Raudsepp
> Hi,
> thanks for your quick reply. 
> xorg.conf an Xorg.0.log are attached.
> Best regards,
> Chrisitan

Hello,

As I don't see answers from others, I can mostly only suggest trying a
newer geode driver and xorg-server, as I don't have experience with the
older ones.

However, the log says that it finds a 1360x768 at 60.0Hz, and I don't see
it rejecting it. Maybe it just doesn't pick it as default without
manually (or through desktop environment) instructing different but it's
available for runtime changing? A newer driver version might behave
different in that regard.
What does the "xrandr" output tell? From the log I can see that the
virtual framebuffer size is 1920x1080, so 1360x768 should fit fine in
there.
Perhaps xrandr lists 1360x768 still but as non-default right now?

Do you have a visible wrong resolution picture working or can run it
remotely over ssh or some such with DISPLAY=:0 xrandr?


Regards,
Mart Raudsepp