ati rage mobility-p crash
rwas
rbtwas at gmail.com
Wed Jan 29 17:57:10 PST 2014
Hello,
I've had this bug since I upgraded to OS 12.3. When I run anything with Java
the X server crashes. Apparently this is an old bug. I've seen
references to it
going back past 2011. I've searched and can't find any activity on this
issue.
Do I submit a new bug?
I'd be happy to look into fixing the driver myself but there appears to
be very
little info on how one get'started into X driver development. Help there
would be
appreciated as well...
I've tried using the "xf86-video-ati-7.2.0" driver but this does not
solve the problem.
System: Gateway Solo 9300 Pro
OS: OpenSuse 12.3
apps that crash the system:
geeque
viewnior
eog (eye of gnome)
seamonkey on websites with java
apps that work (don't crash X server):
any openGL apps I've written
mplayer
gwenview
How to proceed?
Thanks.
Robert W.
xorg log excerpt:
[235564.151] (EE)
[235564.152] (EE) Backtrace:
[235564.268] (EE) 0: X (xorg_backtrace+0x49) [0x81eb2c9]
[235564.269] (EE) 1: X (0x8048000+0x1a71d6) [0x81ef1d6]
[235564.269] (EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0)
[0xb778a410]
[235564.269] (EE) 3: /usr/lib/xorg/modules/drivers/mach64_drv.so
(0xb6ea6000+0x1ee81) [0xb6ec4e81]
[235564.269] (EE) 4: /usr/lib/xorg/modules/drive[ 129.814]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 129.815] X Protocol Version 11, Revision 0
[ 129.815] Build Operating System: openSUSE SUSE LINUX
[ 129.817] Current Operating System: Linux jupiter.site
3.7.10-1.16-default #1 SMP Fri May 31 20:21:23 UTC 2013 (97c14ba) i686
[ 129.817] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-default
root=UUID=3975cc1d-9733-410e-bcf6-bedddb2b2f12
resume=/dev/disk/by-id/ata-Hitachi_HTS541616J9AT00_SB044DHJJ050LH-part1
splash=silent quiet showopts
[ 129.818] Build Date: 15 July 2013 12:24:25PM
[ 129.818]
[ 129.818] Current version of pixman: 0.28.2
[ 129.818] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 129.818] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 129.819] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 27
00:44:41 2014
[ 129.900] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 129.901] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 129.966] (==) No Layout section. Using the first Screen section.
[ 129.966] (==) No screen section available. Using defaults.
[ 129.966] (**) |-->Screen "Default Screen Section" (0)
[ 129.966] (**) | |-->Monitor "<default monitor>"
[ 129.967] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 129.967] (**) | |-->Device "Default Device"
[ 129.967] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 129.967] (==) Automatically adding devices
[ 129.967] (==) Automatically enabling devices
[ 129.967] (==) Automatically adding GPU devices
[ 130.091] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 130.091] Entry deleted from font path.
[ 130.102] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 130.102] (==) ModulePath set to
"/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 130.102] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 130.102] (II) Loader magic: 0x8261620
[ 130.102] (II) Module ABI versions:
[ 130.102] X.Org ANSI C Emulation: 0.4
[ 130.102] X.Org Video Driver: 13.1
[ 130.102] X.Org XInput driver : 18.0
[ 130.102] X.Org Server Extension : 7.0
[ 130.105] (--) PCI:*(0:1:0:0) 1002:4c4d:107b:9300 rev 100, Mem @
0xf5000000/16777216, 0xf4100000/4096, I/O @ 0x00009000/256, BIOS @
0x????????/131072
[ 130.106] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file
or directory)
rs/mach64_drv.so (0xb6ea6000+0x1ef72) [0xb6ec4f72]
[ 130.106] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file
or directory)
[ 130.112] Initializing built-in extension Generic Event Extension
[ 130.112] Initializing built-in extension SHAPE
[ 130.112] Initializing built-in extension MIT-SHM
[ 130.112] Initializing built-in extension XInputExtension
[ 130.112] Initializing built-in extension XTEST
[ 130.112] Initializing built-in extension BIG-REQUESTS
[ 130.112] Initializing built-in extension SYNC
[ 130.112] Initializing built-in extension XKEYBOARD
[ 130.112] Initializing built-in extension XC-MISC
[ 130.112] Initializing built-in extension SECURITY
[ 130.112] Initializing built-in extension XINERAMA
[ 130.112] Initializing built-in extension XFIXES
[ 130.112] Initializing built-in extension RENDER
[ 130.112] Initializing built-in extension RANDR
[ 130.112] Initializing built-in extension COMPOSITE
[ 130.112] Initializing built-in extension DAMAGE
[ 130.112] Initializing built-in extension MIT-SCREEN-SAVER
[ 130.112] Initializing built-in extension DOUBLE-BUFFER
[ 130.112] Initializing built-in extension RECORD
[ 130.113] Initializing built-in extension DPMS
[ 130.113] Initializing built-in extension X-Resource
[ 130.113] Initializing built-in extension XVideo
[ 130.113] Initializing built-in extension XVideo-MotionCompensation
[ 130.113] Initializing built-in extension XFree86-VidModeExtension
[ 130.113] Initializing built-in extension XFree86-DGA
[ 130.113] Initializing built-in extension XFree86-DRI
[ 130.113] Initializing built-in extension DRI2
[ 130.113] (II) "glx" will be loaded by default.
[ 130.113] (II) LoadModule: "dri2"
[ 130.113] (II) Module "dri2" already built-in
[ 130.114] (II) LoadModule: "glamoregl"
[ 130.144] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 130.485] (II) Module glamoregl: vendor="X.Org Foundation"
[ 130.485] compiled for 1.13.2, module version = 0.5.0
[ 130.485] ABI class: X.Org ANSI C Emulation, version 0.4
[ 130.485] (II) LoadModule: "glx"
[ 130.487] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 130.577] (II) Module glx: vendor="X.Org Foundation"
[ 130.577] compiled for 1.13.2, module version = 1.0.0
[ 130.577] ABI class: X.Org Server Extension, version 7.0
[ 130.578] (==) AIGLX enabled
[ 130.606] Loading extension GLX
[ 130.606] (II) LoadModule: "mach64"
[ 130.619] (II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
[ 130.652] (II) Module mach64: vendor="X.Org Foundation"
[ 130.652] compiled for 1.13.1, module version = 6.9.4
[ 130.652] Module class: X.Org Video Driver
[ 130.652] ABI class: X.Org Video Driver, version 13.1
[ 130.653] (II) MACH64: Driver for ATI Mach64 chipsets
[ 130.653] (--) using VT number 2
[ 130.676] (II) MACH64(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 130.677] (==) MACH64(0): Depth 24, (--) framebuffer bpp 32
[ 130.677] (**) MACH64(0): Option "AccelMethod" "uxa"
[ 130.677] (==) MACH64(0): Using EXA acceleration architecture
[ 130.677] (II) MACH64: Mach64 in slot 1:0:0 detected.
[ 130.677] (II) Loading sub module "int10"
[ 130.677] (II) LoadModule: "int10"
[ 130.677] (II) LoadModule: "int10"
[ 130.678] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 130.722] (II) Module int10: vendor="X.Org Foundation"
[ 130.722] compiled for 1.13.2, module version = 1.0.0
[ 130.722] ABI class: X.Org Video Driver, version 13.1
[ 130.724] (II) MACH64(0): Primary V_BIOS segment is: 0xc000
[ 130.725] (II) Loading sub module "ddc"
[ 130.725] (II) LoadModule: "ddc"
[ 130.725] (II) Module "ddc" already built-in
[ 130.725] (II) Loading sub module "vbe"
[ 130.725] (II) LoadModule: "vbe"
[ 130.726] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 130.742] (II) Module vbe: vendor="X.Org Foundation"
[ 130.742] compiled for 1.13.2, module version = 1.1.0
[ 130.742] ABI class: X.Org Video Driver, version 13.1
[ 130.743] (II) MACH64(0): VESA BIOS detected
[ 130.743] (II) MACH64(0): VESA VBE Version 2.0
[ 130.743] (II) MACH64(0): VESA VBE Total Mem: 8128 kB
[ 130.743] (II) MACH64(0): VESA VBE OEM: ATI MACH64
[ 130.743] (II) MACH64(0): VESA VBE OEM Software Rev: 1.0
[ 130.743] (II) MACH64(0): VESA VBE OEM Vendor: ATI Technologies Inc.
[ 130.743] (II) MACH64(0): VESA VBE OEM Product: MACH64RM
[ 130.743] (II) MACH64(0): VESA VBE OEM Product Rev: 01.00
[ 130.746] (II) MACH64(0): VESA VBE DDC supported
[ 130.746] (II) MACH64(0): VESA VBE DDC Level none
[ 130.746] (II) MACH64(0): VESA VBE DDC transfer in appr. 2 sec.
[ 130.748] (II) MACH64(0): VESA VBE DDC read failed
[ 130.749] (--) MACH64(0): Panel model 1280x1024 TFT 8-8-8.
[ 130.749] (II) MACH64(0): BIOS Data: BIOSSize=0x10000, ROMTable=0x0106.
[ 130.749] (II) MACH64(0): BIOS Data: ClockTable=0x0A46,
FrequencyTable=0x0000.
[ 130.749] (II) MACH64(0): BIOS Data: LCDTable=0x0188.
[ 130.749] (II) MACH64(0): BIOS Data: VideoTable=0x0158,
HardwareTable=0x0166.
[ 130.749] (II) MACH64(0): BIOS Data: I2CType=0x03, Tuner=0x00,
Decoder=0x03, Audio=0x0F.
[ 130.749] (--) MACH64(0): ATI 3D Rage Mobility graphics controller
detected.
[ 130.749] (--) MACH64(0): Chip type 4C4D "LM", version 4, foundry
TSMC, class 0, revision 0x01.
[ 130.749] (--) MACH64(0): AGP bus interface detected; block I/O base
is 0x9000.
[ 130.749] (--) MACH64(0): ATI Mach64 adapter detected.
[ 130.749] (!!) MACH64(0): For information on using the multimedia
capabilities
of this adapter, please see http://gatos.sf.net.
[ 130.749] (--) MACH64(0): Internal RAMDAC (subtype 1) detected.
[ 130.749] (==) MACH64(0): RGB weight 888
[ 130.749] (==) MACH64(0): Default visual is TrueColor
[ 130.749] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
[ 130.750] (II) MACH64(0): Using Mach64 accelerator CRTC.
[ 130.750] (--) MACH64(0): 1280x1024 panel (ID 5) detected.
[ 130.750] (--) MACH64(0): Panel clock is 107.859 MHz.
[ 130.750] (II) MACH64(0): Using digital flat panel interface.
[ 130.750] (II) MACH64(0): Storing hardware cursor image at 0xF57FFC00.
[ 130.750] (II) MACH64(0): Using 8 MB linear aperture at 0xF5000000.
[ 130.750] (!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image
area.
[ 130.750] (II) MACH64(0): Using Block 0 MMIO aperture at 0xF4100400.
[ 130.750] (II) MACH64(0): Using Block 1 MMIO aperture at 0xF4100000.
[ 130.751] (II) MACH64(0): MMIO write caching enabled.
[ 130.752] (--) MACH64(0): 8192 kB of SDRAM (1:1) detected (using 8191
kB).
[ 130.752] (WW) MACH64(0): Cannot shadow an accelerated frame buffer.
[ 130.752] (II) MACH64(0): Engine XCLK 114.773 MHz; Refresh rate code 10.
[ 130.752] (--) MACH64(0): Internal programmable clock generator detected.
[ 130.752] (--) MACH64(0): Reference clock 29.500 MHz.
[ 130.752] (WW) MACH64(0): Unable to estimate virtual size
[ 130.752] (II) MACH64(0): Maximum clock: 229.00 MHz
[ 130.752] (II) MACH64(0): Not using default mode "1600x1200" (exceeds
panel dimensions)
[ 130.752] (II) MACH64(0): Not using default mode "800x600" (exceeds
panel dimensions)
[ 130.752] (II) MACH64(0): Not using default mode "1600x1200" (exceeds
panel dimensions)
[ 130.752] (II) MACH64(0): Not using default mode "800x600" (exceeds
panel dimensions)
[ 130.752] (II) MACH64(0): Not using default mode "1600x1200" (exceeds
panel dimensions)
[ 130.752] (II) MACH64(0): Not using default mode "800x600" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1600x1200" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "800x600" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1600x1200" (bad
mode clock/interlace/doublescan)
[ 130.753] (II) MACH64(0): Not using default mode "800x600" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1792x1344"
(insufficient memory for mode)
[ 130.753] (II) MACH64(0): Not using default mode "896x672" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1792x1344"
(insufficient memory for mode)
[ 130.753] (II) MACH64(0): Not using default mode "896x672" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1856x1392"
(insufficient memory for mode)
[ 130.753] (II) MACH64(0): Not using default mode "928x696" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1856x1392"
(insufficient memory for mode)
[ 130.753] (II) MACH64(0): Not using default mode "928x696" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 130.753] (II) MACH64(0): Not using default mode "960x720" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 130.753] (II) MACH64(0): Not using default mode "960x720" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1400x1050" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "700x525" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1400x1050" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "700x525" (exceeds
panel dimensions)
[ 130.753] (II) MACH64(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 130.754] (II) MACH64(0): Not using default mode "960x720" (exceeds
panel dimensions)
[ 130.754] (II) MACH64(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 130.754] (II) MACH64(0): Not using default mode "1024x768" (exceeds
panel dimensions)
[ 130.754] (II) MACH64(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 130.754] (II) MACH64(0): Not using default mode "1024x768" (exceeds
panel dimensions)
[ 130.754] (II) MACH64(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 130.754] (II) MACH64(0): Not using default mode "1024x768" (exceeds
panel dimensions)
[ 130.754] (--) MACH64(0): Virtual size is 1280x1024 (pitch 1280)
[ 130.754] (**) MACH64(0): *Default mode "1280x1024": 157.5 MHz, 91.1
kHz, 85.0 Hz
[ 130.755] (II) MACH64(0): Modeline "1280x1024"x85.0 157.50 1280 1344
1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz zd)
[ 130.755] (**) MACH64(0): *Default mode "1280x1024": 135.0 MHz, 80.0
kHz, 75.0 Hz
[ 130.755] (II) MACH64(0): Modeline "1280x1024"x75.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz zd)
[ 130.755] (**) MACH64(0): *Default mode "1280x1024": 108.0 MHz, 64.0
kHz, 60.0 Hz
[ 130.755] (II) MACH64(0): Modeline "1280x1024"x60.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz zd)
[ 130.755] (**) MACH64(0): *Built-in mode "Native panel mode": 107.9
MHz, 83.2 kHz, 81.1 Hz
[ 130.755] (II) MACH64(0): Modeline "Native panel mode"x81.1 107.86
1280 1280 1288 1296 1024 1024 1025 1026 (83.2 kHz zb)
[ 130.755] (**) MACH64(0): *Default mode "1280x960": 148.5 MHz, 85.9
kHz, 85.0 Hz
[ 130.755] (II) MACH64(0): Modeline "1280x960"x85.0 148.50 1280 1344
1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz zd)
[ 130.755] (**) MACH64(0): *Default mode "1280x960": 108.0 MHz, 60.0
kHz, 60.0 Hz
[ 130.755] (II) MACH64(0): Modeline "1280x960"x60.0 108.00 1280 1376
1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz zd)
[ 130.755] (**) MACH64(0): *Default mode "1152x864": 108.0 MHz, 67.5
kHz, 75.0 Hz
[ 130.755] (II) MACH64(0): Modeline "1152x864"x75.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz zd)
[ 130.755] (**) MACH64(0): *Default mode "1024x768i": 44.9 MHz, 35.5
kHz, 86.9 Hz (I)
[ 130.755] (II) MACH64(0): Modeline "1024x768i"x86.9 44.90 1024 1032
1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz zd)
[ 130.755] (**) MACH64(0): *Default mode "1024x768": 94.5 MHz, 68.7
kHz, 85.0 Hz
[ 130.755] (II) MACH64(0): Modeline "1024x768"x85.0 94.50 1024 1072
1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "1024x768": 78.8 MHz, 60.0
kHz, 75.0 Hz
[ 130.756] (II) MACH64(0): Modeline "1024x768"x75.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "1024x768": 75.0 MHz, 56.5
kHz, 70.1 Hz
[ 130.756] (II) MACH64(0): Modeline "1024x768"x70.1 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "1024x768": 65.0 MHz, 48.4
kHz, 60.0 Hz
[ 130.756] (II) MACH64(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "832x624": 57.3 MHz, 49.7
kHz, 74.6 Hz
[ 130.756] (II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928
1152 624 625 628 667 -hsync -vsync (49.7 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "800x600": 56.3 MHz, 53.7
kHz, 85.1 Hz
[ 130.756] (II) MACH64(0): Modeline "800x600"x85.1 56.30 800 832 896
1048 600 601 604 631 +hsync +vsync (53.7 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "800x600": 49.5 MHz, 46.9
kHz, 75.0 Hz
[ 130.756] (II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "800x600": 50.0 MHz, 48.1
kHz, 72.2 Hz
[ 130.756] (II) MACH64(0): Modeline "800x600"x72.2 50.00 800 856 976
1040 600 637 643 666 +hsync +vsync (48.1 kHz zd)
[ 130.756] (**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9
kHz, 60.3 Hz
[ 130.757] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2
kHz, 56.2 Hz
[ 130.757] (II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x512": 78.8 MHz, 91.1
kHz, 85.0 Hz (D)
[ 130.757] (II) MACH64(0): Modeline "640x512"x85.0 78.75 640 672 752
864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x512": 67.5 MHz, 80.0
kHz, 75.0 Hz (D)
[ 130.757] (II) MACH64(0): Modeline "640x512"x75.0 67.50 640 648 720
844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x512": 54.0 MHz, 64.0
kHz, 60.0 Hz (D)
[ 130.757] (II) MACH64(0): Modeline "640x512"x60.0 54.00 640 664 720
844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x480": 74.2 MHz, 85.9
kHz, 85.1 Hz (D)
[ 130.757] (II) MACH64(0): Modeline "640x480"x85.1 74.25 640 672 752
864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x480": 36.0 MHz, 43.3
kHz, 85.0 Hz
[ 130.757] (II) MACH64(0): Modeline "640x480"x85.0 36.00 640 696 752
832 480 481 484 509 -hsync -vsync (43.3 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.5
kHz, 75.0 Hz
[ 130.757] (II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.9
kHz, 72.8 Hz
[ 130.757] (II) MACH64(0): Modeline "640x480"x72.8 31.50 640 664 704
832 480 489 492 520 -hsync -vsync (37.9 kHz zd)
[ 130.757] (**) MACH64(0): *Default mode "640x480": 54.0 MHz, 60.0
kHz, 60.0 Hz (D)
[ 130.758] (II) MACH64(0): Modeline "640x480"x60.0 54.00 640 688 744
900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5
kHz, 59.9 Hz
[ 130.758] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "720x400": 35.5 MHz, 37.9
kHz, 85.0 Hz
[ 130.758] (II) MACH64(0): Modeline "720x400"x85.0 35.50 720 756 828
936 400 401 404 446 -hsync +vsync (37.9 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "640x400": 31.5 MHz, 37.9
kHz, 85.1 Hz
[ 130.758] (II) MACH64(0): Modeline "640x400"x85.1 31.50 640 672 736
832 400 401 404 445 -hsync +vsync (37.9 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "576x432": 54.0 MHz, 67.5
kHz, 75.0 Hz (D)
[ 130.758] (II) MACH64(0): Modeline "576x432"x75.0 54.00 576 608 672
800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "640x350": 31.5 MHz, 37.9
kHz, 85.1 Hz
[ 130.758] (II) MACH64(0): Modeline "640x350"x85.1 31.50 640 672 736
832 350 382 385 445 +hsync -vsync (37.9 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "512x384i": 22.4 MHz, 35.5
kHz, 86.6 Hz (D)
[ 130.758] (II) MACH64(0): Modeline "512x384i"x86.6 22.45 512 516 604
632 384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "512x384": 47.2 MHz, 68.7
kHz, 85.0 Hz (D)
[ 130.758] (II) MACH64(0): Modeline "512x384"x85.0 47.25 512 536 584
688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz zd)
[ 130.758] (**) MACH64(0): *Default mode "512x384": 39.4 MHz, 60.0
kHz, 75.0 Hz (D)
[ 130.758] (II) MACH64(0): Modeline "512x384"x75.0 39.38 512 520 568
656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "512x384": 37.5 MHz, 56.5
kHz, 70.1 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "512x384"x70.1 37.50 512 524 592
664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "512x384": 32.5 MHz, 48.4
kHz, 60.0 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "512x384"x60.0 32.50 512 524 592
672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "416x312": 28.6 MHz, 49.7
kHz, 74.7 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "416x312"x74.7 28.64 416 432 464
576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "400x300": 28.1 MHz, 53.7
kHz, 85.3 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "400x300"x85.3 28.15 400 416 448
524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "400x300": 24.8 MHz, 46.9
kHz, 75.1 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "400x300"x75.1 24.75 400 408 448
528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "400x300": 25.0 MHz, 48.1
kHz, 72.2 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "400x300"x72.2 25.00 400 428 488
520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9
kHz, 60.3 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "400x300"x60.3 20.00 400 420 484
528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2
kHz, 56.3 Hz (D)
[ 130.759] (II) MACH64(0): Modeline "400x300"x56.3 18.00 400 412 448
512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 130.759] (**) MACH64(0): *Default mode "320x240": 18.0 MHz, 43.3
kHz, 85.2 Hz (D)
[ 130.760] (II) MACH64(0): Modeline "320x240"x85.2 18.00 320 348 376
416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz zd)
[ 130.760] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.5
kHz, 75.0 Hz (D)
[ 130.760] (II) MACH64(0): Modeline "320x240"x75.0 15.75 320 328 360
420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz zd)
[ 130.760] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.9
kHz, 72.8 Hz (D)
[ 130.760] (II) MACH64(0): Modeline "320x240"x72.8 15.75 320 332 352
416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz zd)
[ 130.760] (**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5
kHz, 60.1 Hz (D)
[ 130.760] (II) MACH64(0): Modeline "320x240"x60.1 12.59 320 328 376
400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[ 130.760] (**) MACH64(0): *Default mode "360x200": 17.8 MHz, 37.9
kHz, 85.0 Hz (D)
[ 130.760] (II) MACH64(0): Modeline "360x200"x85.0 17.75 360 378 414
468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz zd)
[ 130.760] (**) MACH64(0): *Default mode "320x200": 15.8 MHz, 37.9
kHz, 85.3 Hz (D)
[ 130.760] (II) MACH64(0): Modeline "320x200"x85.3 15.75 320 336 368
416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz zd)
[ 130.760] (**) MACH64(0): *Default mode "320x175": 15.8 MHz, 37.9
kHz, 85.3 Hz (D)
[ 130.760] (II) MACH64(0): Modeline "320x175"x85.3 15.75 320 336 368
416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz zd)
[ 130.760] (==) MACH64(0): DPI set to (96, 96)
[ 130.760] (II) Loading sub module "fb"
[ 130.760] (II) LoadModule: "fb"
[ 130.761] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 130.801] (II) Module fb: vendor="X.Org Foundation"
[ 130.801] compiled for 1.13.2, module version = 1.0.0
[ 130.801] ABI class: X.Org ANSI C Emulation, version 0.4
[ 130.801] (II) Loading sub module "ramdac"
[ 130.801] (II) LoadModule: "ramdac"
[ 130.801] (II) Module "ramdac" already built-in
[ 130.802] (II) Loading sub module "exa"
[ 130.802] (II) LoadModule: "exa"
[ 130.803] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 130.854] (II) Module exa: vendor="X.Org Foundation"
[ 130.854] compiled for 1.13.2, module version = 2.6.0
[ 130.854] ABI class: X.Org Video Driver, version 13.1
[ 130.854] (II) Loading sub module "i2c"
[ 130.854] (II) LoadModule: "i2c"
[ 130.854] (II) Module "i2c" already built-in
[ 130.854] (II) MACH64(0): I2C bus "Mach64" initialized.
[ 130.855] (--) Depth 24 pixmap format is 32 bpp
[ 130.860] (WW) MACH64(0): DRI static buffer allocation failed -- need
at least 12800 kB video memory
[ 130.875] (II) MACH64(0): EXA memory management initialized
base : 0xb6516000
offscreen: + 500000
size : + 7ffc00
cursor : 0xb6d15c00
[ 130.875] (II) MACH64(0): Will use 3071 kB of offscreen memory for EXA
or 0.60 viewports (composite)
or 2.27 dvdframes (xvideo)
[ 130.875] (II) MACH64(0): Render acceleration enabled
[ 130.875] (II) EXA(0): Offscreen pixmap area of 3144704 bytes
[ 130.875] (II) EXA(0): Driver registered support for the following
operations:
[ 130.875] (II) Solid
[ 130.875] (II) Copy
[ 130.875] (II) Composite (RENDER acceleration)
[ 130.876] (==) MACH64(0): Backing store disabled
[ 130.876] (==) MACH64(0): Silken mouse enabled
[ 130.887] (==) MACH64(0): DPMS enabled
[ 130.887] (II) MACH64(0): Direct rendering disabled
[ 130.888] (==) RandR enabled
[ 130.926] (II) AIGLX: Screen 0 is not DRI2 capable
[ 130.926] (II) AIGLX: Screen 0 is not DRI capable
[ 131.659] (II) AIGLX: Loaded and initialized swrast
[ 131.659] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 132.399] (II) config/udev: Adding input device Power Button
(/dev/input/event5)
[ 132.400] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 132.400] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 132.400] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 132.400] (II) LoadModule: "evdev"
[ 132.401] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 132.430] (II) Module evdev: vendor="X.Org Foundation"
[ 132.430] compiled for 1.13.1, module version = 2.7.3
[ 132.430] Module class: X.Org XInput Driver
[ 132.430] ABI class: X.Org XInput driver, version 18.0
[ 132.430] (II) Using input driver 'evdev' for 'Power Button'
[ 132.430] (**) Power Button: always reports core events
[ 132.430] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 132.431] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 132.431] (--) evdev: Power Button: Found keys
[ 132.431] (II) evdev: Power Button: Configuring as keyboard
[ 132.431] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 132.431] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 132.431] (**) Option "xkb_rules" "evdev"
[ 132.431] (**) Option "xkb_model" "evdev"
[ 132.431] (**) Option "xkb_layout" "us"
[ 132.532] (II) config/udev: Adding input device Lid Switch
(/dev/input/event3)
[ 132.532] (II) No input driver specified, ignoring this device.
[ 132.532] (II) This device may have been added with another device file.
[ 132.533] (II) config/udev: Adding input device Sleep Button
(/dev/input/event4)
[ 132.534] (**) Sleep Button: Applying InputClass "evdev keyboard
catchall"
[ 132.534] (**) Sleep Button: Applying InputClass "evdev keyboard
catchall"
[ 132.534] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[ 132.534] (II) Using input driver 'evdev' for 'Sleep Button'
[ 132.534] (**) Sleep Button: always reports core events
[ 132.534] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 132.534] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 132.534] (--) evdev: Sleep Button: Found keys
[ 132.534] (II) evdev: Sleep Button: Configuring as keyboard
[ 132.534] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[ 132.534] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 7)
[ 132.534] (**) Option "xkb_rules" "evdev"
[ 132.534] (**) Option "xkb_model" "evdev"
[ 132.535] (**) Option "xkb_layout" "us"
[ 132.537] (II) config/udev: Adding input device Logitech Unifying
Device. Wireless PID:400a (/dev/input/event2)
[ 132.537] (**) Logitech Unifying Device. Wireless PID:400a: Applying
InputClass "evdev pointer catchall"
[ 132.538] (**) Logitech Unifying Device. Wireless PID:400a: Applying
InputClass "evdev pointer catchall"
[ 132.538] (II) Using input driver 'evdev' for 'Logitech Unifying
Device. Wireless PID:400a'
[ 132.538] (**) Logitech Unifying Device. Wireless PID:400a: always
reports core events
[ 132.538] (**) evdev: Logitech Unifying Device. Wireless PID:400a:
Device: "/dev/input/event2"
[ 132.538] (--) evdev: Logitech Unifying Device. Wireless PID:400a:
Vendor 0x46d Product 0xc52b
[ 132.538] (--) evdev: Logitech Unifying Device. Wireless PID:400a:
Found 20 mouse buttons
[ 132.538] (--) evdev: Logitech Unifying Device. Wireless PID:400a:
Found scroll wheel(s)
[ 132.538] (--) evdev: Logitech Unifying Device. Wireless PID:400a:
Found relative axes
[ 132.538] (--) evdev: Logitech Unifying Device. Wireless PID:400a:
Found x and y relative axes
[ 132.538] (II) evdev: Logitech Unifying Device. Wireless PID:400a:
Configuring as mouse
[ 132.538] (II) evdev: Logitech Unifying Device. Wireless PID:400a:
Adding scrollwheel support
[ 132.539] (**) evdev: Logitech Unifying Device. Wireless PID:400a:
YAxisMapping: buttons 4 and 5
[ 132.539] (**) evdev: Logitech Unifying Device. Wireless PID:400a:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 132.539] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/input/input2/event2"
[ 132.539] (II) XINPUT: Adding extended input device "Logitech
Unifying Device. Wireless PID:400a" (type: MOUSE, id 8)
[ 132.539] (II) evdev: Logitech Unifying Device. Wireless PID:400a:
initialized for relative axes.
[ 132.540] (**) Logitech Unifying Device. Wireless PID:400a: (accel)
keeping acceleration scheme 1
[ 132.540] (**) Logitech Unifying Device. Wireless PID:400a: (accel)
acceleration profile 0
[ 132.540] (**) Logitech Unifying Device. Wireless PID:400a: (accel)
acceleration factor: 2.000
[ 132.540] (**) Logitech Unifying Device. Wireless PID:400a: (accel)
acceleration threshold: 4
[ 132.542] (II) config/udev: Adding input device Logitech Unifying
Device. Wireless PID:400a (/dev/input/mouse1)
[ 132.542] (II) No input driver specified, ignoring this device.
[ 132.542] (II) This device may have been added with another device file.
[ 132.543] (II) config/udev: Adding input device ES1978
(/dev/input/event7)
[ 132.543] (**) ES1978: Applying InputClass "evdev keyboard catchall"
[ 132.543] (**) ES1978: Applying InputClass "evdev keyboard catchall"
[ 132.543] (**) ES1978: Applying InputClass "LocalKeyboard"
[ 132.543] (II) Using input driver 'evdev' for 'ES1978'
[ 132.543] (**) ES1978: always reports core events
[ 132.543] (**) evdev: ES1978: Device: "/dev/input/event7"
[ 132.544] (--) evdev: ES1978: Vendor 0x125d Product 0x1978
[ 132.544] (--) evdev: ES1978: Found keys
[ 132.544] (II) evdev: ES1978: Configuring as keyboard
[ 132.544] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:08.0/input/input7/event7"
[ 132.544] (II) XINPUT: Adding extended input device "ES1978" (type:
KEYBOARD, id 9)
[ 132.544] (**) Option "xkb_rules" "evdev"
[ 132.544] (**) Option "xkb_model" "evdev"
[ 132.544] (**) Option "xkb_layout" "us"
[ 132.547] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 132.547] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 132.547] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 132.547] (**) AT Translated Set 2 keyboard: Applying InputClass
"LocalKeyboard"
[ 132.547] (II) Using input driver 'evdev' for 'AT Translated Set 2
keyboard'
[ 132.547] (**) AT Translated Set 2 keyboard: always reports core events
[ 132.547] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 132.547] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1
Product 0x1
[ 132.547] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 132.548] (II) evdev: AT Translated Set 2 keyboard: Configuring as
keyboard
[ 132.548] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 132.548] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 10)
[ 132.548] (**) Option "xkb_rules" "evdev"
[ 132.548] (**) Option "xkb_model" "evdev"
[ 132.548] (**) Option "xkb_layout" "us"
[ 132.551] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/event1)
[ 132.551] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 132.551] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 132.551] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"touchpad catchall"
[ 132.551] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"Default clickpad buttons"
[ 132.551] (II) LoadModule: "synaptics"
[ 132.552] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 132.624] (II) Module synaptics: vendor="X.Org Foundation"
[ 132.624] compiled for 1.13.2, module version = 1.6.3
[ 132.624] Module class: X.Org XInput Driver
[ 132.624] ABI class: X.Org XInput driver, version 18.0
[ 132.624] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 132.625] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 132.625] (**) Option "Device" "/dev/input/event1"
[ 132.625] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range
1472 - 5472
[ 132.625] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range
1408 - 4448
[ 132.625] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range
0 - 255
[ 132.625] (II) synaptics: SynPS/2 Synaptics TouchPad: device does not
report finger width.
[ 132.625] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 132.625] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2
Product 0x7
[ 132.625] (--) synaptics: SynPS/2 Synaptics TouchPad: invalid finger
width range. defaulting to 0 - 15
[ 132.626] (**) Option "HorizScrollDelta" "0"
[ 132.626] (**) Option "TapButton1" "1"
[ 132.626] (**) Option "TapButton2" "3"
[ 132.626] (**) Option "TapButton3" "2"
[ 132.626] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 132.626] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 132.626] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[ 132.626] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 132.626] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MinSpeed is now constant deceleration 2.5
[ 132.626] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now
1.75
[ 132.627] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is
now 0.040
[ 132.627] (**) SynPS/2 Synaptics TouchPad: (accel) keeping
acceleration scheme 1
[ 132.627] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 132.627] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
factor: 2.000
[ 132.628] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
threshold: 4
[ 132.628] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 132.629] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/mouse0)
[ 132.629] (**) SynPS/2 Synaptics TouchPad: Ignoring device from
InputClass "touchpad ignore duplicates"
[ 132.630] (II) config/udev: Adding input device PC Speaker
(/dev/input/event6)
[ 132.630] (II) No input driver specified, ignoring this device.
[ 132.630] (II) This device may have been added with another device file.
[235564.270] (EE) 5: /usr/lib/xorg/modules/libexa.so (0xb64d7000+0xdecf)
[0xb64e4ecf]
[235564.270] (EE) 6: /usr/lib/xorg/modules/libexa.so (0xb64d7000+0xebe1)
[0xb64e5be1]
[235564.270] (EE) 7: /usr/lib/xorg/modules/libexa.so (0xb64d7000+0xcbda)
[0xb64e3bda]
[235564.271] (EE) 8: X (0x8048000+0x123604) [0x816b604]
[235564.271] (EE) 9: X (CompositeGlyphs+0xbe) [0x8158ebe]
[235564.271] (EE) 10: X (0x8048000+0x11c459) [0x8164459]
[235564.272] (EE) 11: X (0x8048000+0x117e5e) [0x815fe5e]
[235564.272] (EE) 12: X (0x8048000+0x37915) [0x807f915]
[235564.273] (EE) 13: X (0x8048000+0x24e8a) [0x806ce8a]
[235564.273] (EE) 14: /lib/libc.so.6 (__libc_start_main+0xf5) [0xb72e0525]
[235564.274] (EE) 15: X (0x8048000+0x25259) [0x806d259]
[235564.274] (EE)
[235564.274] (EE) Segmentation fault at address 0xc
[235564.274]
Fatal server error:
[235564.274] Caught signal 11 (Segmentation fault). Server aborting
[235564.274]
[235564.275] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
More information about the xorg-driver-ati
mailing list