ForceTVOut option in KMS

Sergej Pupykin ml at sergej.pp.ru
Mon Dec 6 14:49:29 PST 2010


On 04.12.2010 13:59, Sergej Pupykin wrote:
> Hi,
>
> how can I force TV-out on in KMS?
I found video kernel option explanation on 
http://nouveau.freedesktop.org/wiki/KernelModeSetting

I add

video=DVI-I-1:1280x1024-24 at 60e video=DIN-1:1024x768-24 at 60e

into grub/menu.lst but it affects only DVI-I-1 output, it looks like 2nd 
video option is ignored.

Also I try to add single "video=DIN-1:1024x768-24 at 60e" without success.

In dmesg I can see "forcing DVI-I-...." but can not see anything about DIN

*** booting with both video options ***

[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV620 0x1002:0x95C5).
[drm] register mmio base: 0xFE8E0000
[drm] register mmio size: 65536
ATOM BIOS: RV620
radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 1028022 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: irq 40 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV620 Microcode
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
Radeon i2c bit bus 0x90: Test OK
Radeon i2c bit bus 0x91: Test OK
Radeon i2c bit bus 0x92: Test OK
Radeon i2c bit bus 0x93: bus seems to be busy
[drm:radeon_i2c_create] *ERROR* Failed to register bit i2c 0x93
Radeon i2c bit bus 0x14: Test OK
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DIN
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm]   VGA
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP1: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] forcing DVI-I-1 connector ON
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm]    pitch is 5120
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0



More information about the xorg-driver-ati mailing list