[Bug 16441] Display is washed out on 2nd monitor - ATI ES1000 chipset

[bugzilla-daemon at freedesktop.org]

http://bugs.freedesktop.org/show_bug.cgi?id=16441





--- Comment #9 from Geoff N <geoff at linuxsolve.co.uk>  2008-06-25 02:04:02 PST ---
Created an attachment (id=17370)
 --> (http://bugs.freedesktop.org/attachment.cgi?id=17370)
Radeontool registers after making changes to xorg.conf as requested

I modified xorg.conf -> Device section (see attached) with your suggestions.
After applying the change to xorg.conf both monitors have no signal.
Inoperative.

I tried with the original xorg-x11-drv-ati-6.8.0-4 and the patched version,
both with the same result.
The file attached shows the registers after I made the xorg.conf change.

I was able to get the primary monitor back after setting the radeon registers
as per the working Fedora Core 5 settings. The second monitor still had no
signal.
For our application, we require both monitors working (mirrored).

Just to clarify this problem because I'm not sure it's due to an incorrect BIOS
etc => 
Both VGA monitors work perfectly when Fedora Core 5 or Windows XP are
installed. It is only Fedora Core 8 (latest rpm) that is showing the fault as
described in initial Bug report.

Thanks for your continued assistance.

Geoff.


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.