ATI Mobility Radeon X2300 : ChipID = 0x718a
S.A. Kondakov
virtuousfox at gmail.com
Mon Aug 4 08:03:53 PDT 2008
i've asus f3ke laptop and discrete "ATI Mobility Radeon X2300 " on it.
i will tell some of my notes about that card with hope it would help you
somehow:
i using git mesa, libdrm, x11-drm and xorg-server-1.4.99.906 with dri2 on my
gentoo amd64 system and non-gentoo ebuilds and rules. (attached in archive)
if i use x11-drivers/xf86-video-ati-6.9.0 with XAA acceleration it warnes me
about unsupported card but rendering interfaces, video and simple 3D
(NES,SEGA,N64 emulators and etc; glxgears fps ~1200 per 5 seconds) pretty
well (with slight delays however). with EXA acceleration simple 2D\3D
something like 10% faster but fonts and interfaces slowed down (delays like
2-4 times bigger). also more complex 3D (warsow (non-playable: complaining
about VBlynk or someting like that, less then 1 fps), ePSXe (~20 fps on 3D) ,
pcsx-df) are slooow.
if i use x11-drivers/xf86-video-ati-git with XAA performance is horrible like
it really is not supported ;) EXA it something similar to
x11-drivers/xf86-video-ati-6.9.0. also i have notices some linear artifacts
on right side of the screen then system was under heavy load.
currently i use x11-drivers/xf86-video-ati-6.9.0 with XAA.
mplayer -vo gl give poor performance with both configuration (~15-20), -vo gl2
is ok but looks a little worse. -vo xv give errors "X11 error: BadAlloc
(insufficient resources for operation)" and no video.
also mplayer not respect windows on top of it and show video through them.
maybe all of it is svn mplayer bugs or whatever.
video in terminal looks cool, in comparison with nvidia cards.
--
Qui audet adipiscitur
-------------- next part --------------
[ 0.000000] Linux version 2.6.26-tuxonice-v-fox-laptop (root at dfx-laptop) (gcc version 4.3.1 (Gentoo 4.3.1-r1 p1.1) ) #2 SMP PREEMPT Fri Aug 1 00:00:46 YEKST 2008
[ 0.000000] Command line: root=/dev/sda2 resume=swap:/dev/sda5 video=uvesafb:1024x768
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff98000 (usable)
[ 0.000000] BIOS-e820: 000000007ff98000 - 000000007ffa0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524184) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 524288
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping
[ 0.000000] early_memtest: pattern num 1
[ 0.000000] 0000000000001000 - 0000000000006000 pattern 0
[ 0.000000] 000000000000b000 - 000000000009fc00 pattern 0
[ 0.000000] 0000000000100000 - 0000000000200000 pattern 0
[ 0.000000] 00000000008ba928 - 0000000037f25000 pattern 0
[ 0.000000] 0000000037fef406 - 000000007ff98000 pattern 0
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8DB0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFA0000, 0048 (r1 _ASUS_ Notebook 20071213 MSFT 97)
[ 0.000000] ACPI: FACP 7FFA0200, 0084 (r2 121307 FACP1504 20071213 MSFT 97)
[ 0.000000] ACPI: DSDT 7FFA0640, 96EE (r1 F3K00 F3K00001 1 INTL 20051117)
[ 0.000000] ACPI: FACS 7FFAE000, 0040
[ 0.000000] ACPI: APIC 7FFA0390, 005C (r1 121307 APIC1504 20071213 MSFT 97)
[ 0.000000] ACPI: MCFG 7FFA03F0, 003C (r1 121307 OEMMCFG 20071213 MSFT 97)
[ 0.000000] ACPI: SLIC 7FFA0430, 0176 (r1 _ASUS_ Notebook 20071213 MSFT 97)
[ 0.000000] ACPI: ECDT 7FFA05E0, 0054 (r1 121307 OEMECDT 20071213 MSFT 97)
[ 0.000000] ACPI: BOOT 7FFA05B0, 0028 (r1 121307 BOOT1504 20071213 MSFT 97)
[ 0.000000] ACPI: OEMB 7FFAE040, 007D (r1 121307 OEMB1504 20071213 MSFT 97)
[ 0.000000] ACPI: HPET 7FFA9D30, 0038 (r1 121307 OEMHPET 20071213 MSFT 97)
[ 0.000000] ACPI: SSDT 7FFA9D70, 022C (r1 AMI POWERNOW 1 AMD 1)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff98000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524184) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff98000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000004fff]
[ 0.000000] bootmap [000000000000b000 - 000000000001aff7] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-8ba927] TEXT DATA BSS
[ 0.000000] early res: 3 [37f25000-37fef405] RAMDISK
[ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-afff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524184
[ 0.000000] On node 0 totalpages: 524087
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1826 pages reserved
[ 0.000000] DMA zone: 2117 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512977 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 36996 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515094
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 resume=swap:/dev/sda5 video=uvesafb:1024x768
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 1895.251 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Checking aperture...
[ 0.000999] Node 0: aperture @ 288000000 size 32 MB
[ 0.000999] Aperture beyond 4GB. Ignoring.
[ 0.000999] No AGP bridge found
[ 0.000999] Memory: 2059700k/2096736k available (4400k kernel code, 36648k reserved, 1589k data, 408k init)
[ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.061258] Calibrating delay using timer specific routine.. 3901.80 BogoMIPS (lpj=1950901)
[ 0.061328] Security Framework initialized
[ 0.061360] Capability LSM initialized
[ 0.061556] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.063433] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.064318] Mount-cache hash table entries: 256
[ 0.064512] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.064541] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.064568] CPU 0/0 -> Node 0
[ 0.064600] CPU: Physical Processor ID: 0
[ 0.064624] CPU: Processor Core ID: 0
[ 0.064667] ACPI: Core revision 20080321
[ 0.095605] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[ 0.095773] Using local APIC timer interrupts.
[ 0.096985] APIC timer calibration result 12468750
[ 0.096985] Detected 12.468 MHz APIC timer.
[ 0.096985] Booting processor 1/1 ip 6000
[ 0.106983] Initializing CPU#1
[ 0.106983] Calibrating delay using timer specific routine.. 3790.37 BogoMIPS (lpj=1895188)
[ 0.106983] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.106983] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.106983] CPU 1/1 -> Node 0
[ 0.106983] CPU: Physical Processor ID: 0
[ 0.106983] CPU: Processor Core ID: 1
[ 0.106983] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.106983] AMD C1E detected late. Force timer broadcast.
[ 0.167974] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[ 0.167974] Brought up 2 CPUs
[ 0.167974] Total of 2 processors activated (7692.17 BogoMIPS).
[ 0.167974] net_namespace: 960 bytes
[ 0.167974] NET: Registered protocol family 16
[ 0.168144] No dock devices found.
[ 0.168974] node 0 link 0: io port [1000, ffffff]
[ 0.168974] TOM: 0000000080000000 aka 2048M
[ 0.168974] node 0 link 0: mmio [e0000000, efffffff]
[ 0.168974] node 0 link 0: mmio [80000000, dfffffff]
[ 0.168974] node 0 link 0: mmio [a0000, bffff]
[ 0.168974] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.168974] bus: [00,ff] on node 0 link 0
[ 0.168974] bus: 00 index 0 io port: [0, ffff]
[ 0.168974] bus: 00 index 1 mmio: [80000000, fcffffffff]
[ 0.168974] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.168974] ACPI: bus type pci registered
[ 0.168974] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.168974] PCI: Not using MMCONFIG.
[ 0.168974] PCI: Using configuration type 1 for base access
[ 0.171965] ACPI: EC: EC description table is found, configuring boot EC
[ 0.181972] ACPI: Interpreter enabled
[ 0.182039] ACPI: (supports S0 S3 S4 S5)
[ 0.182318] ACPI: Using IOAPIC for interrupt routing
[ 0.182759] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.186209] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.191612] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.201969] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.201969] ACPI: EC: driver started in poll mode
[ 0.202048] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.202968] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.204877] PCI: Transparent bridge - 0000:00:14.4
[ 0.204968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.204968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.212967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.213761] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.213967] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.214750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.215534] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.216330] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[ 0.216715] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.217508] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.218966] ACPI: WMI: Mapper loaded
[ 0.218966] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.218966] pnp: PnP ACPI init
[ 0.218966] ACPI: bus type pnp registered
[ 0.222364] pnp: PnP ACPI: found 13 devices
[ 0.222430] ACPI: ACPI bus type pnp unregistered
[ 0.222965] SCSI subsystem initialized
[ 0.222965] libata version 3.00 loaded.
[ 0.223965] PCI: Using ACPI for IRQ routing
[ 0.230471] Bluetooth: Core ver 2.11
[ 0.230964] NET: Registered protocol family 31
[ 0.230964] Bluetooth: HCI device and connection manager initialized
[ 0.230964] Bluetooth: HCI socket layer initialized
[ 0.239502] DMAR:parse DMAR table failure.
[ 0.239963] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.239963] hpet0: 4 32-bit timers, 14318180 Hz
[ 0.241417] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 0.241536] Could not switch to high resolution mode on CPU 0
[ 0.242963] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 0.242963] Could not switch to high resolution mode on CPU 1
[ 0.242968] ACPI: RTC can wake from S4
[ 0.249239] system 00:06: ioport range 0x250-0x253 has been reserved
[ 0.249301] system 00:06: ioport range 0x256-0x25f has been reserved
[ 0.249366] system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.249429] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.249501] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.249563] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.250315] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.250377] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.250439] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.250500] system 00:08: ioport range 0xc50-0xc51 has been reserved
[ 0.250562] system 00:08: ioport range 0xc52-0xc52 has been reserved
[ 0.250624] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.250686] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.250747] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[ 0.250809] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[ 0.250871] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.250932] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.250994] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.251056] system 00:08: ioport range 0x800-0x89f has been reserved
[ 0.251065] system 00:08: ioport range 0xb10-0xb1f has been reserved
[ 0.251065] system 00:08: ioport range 0x900-0x90f has been reserved
[ 0.251130] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.251192] system 00:08: ioport range 0xfe00-0xfefe has been reserved
[ 0.251255] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.251318] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.251387] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.251455] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.251518] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 0.251580] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.251643] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.251710] system 00:0c: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.251995] PCI: Bridge: 0000:00:02.0
[ 0.251995] IO window: c000-cfff
[ 0.252061] MEM window: 0xfdf00000-0xfdffffff
[ 0.252121] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
[ 0.252184] PCI: Bridge: 0000:00:04.0
[ 0.252243] IO window: d000-dfff
[ 0.252302] MEM window: 0xfe000000-0xfe8fffff
[ 0.252362] PREFETCH window: 0x00000000fa000000-0x00000000fcffffff
[ 0.252424] PCI: Bridge: 0000:00:05.0
[ 0.252482] IO window: disabled.
[ 0.252540] MEM window: disabled.
[ 0.252599] PREFETCH window: disabled.
[ 0.252658] PCI: Bridge: 0000:00:06.0
[ 0.252717] IO window: e000-efff
[ 0.252776] MEM window: 0xfe900000-0xfe9fffff
[ 0.252835] PREFETCH window: disabled.
[ 0.252896] PCI: Bridge: 0000:00:07.0
[ 0.252953] IO window: disabled.
[ 0.253019] MEM window: 0xfea00000-0xfeafffff
[ 0.253078] PREFETCH window: disabled.
[ 0.253138] PCI: Bridge: 0000:00:14.4
[ 0.253196] IO window: disabled.
[ 0.253258] MEM window: 0xfeb00000-0xfebfffff
[ 0.253319] PREFETCH window: disabled.
[ 0.253394] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.253402] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.253408] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.253415] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.253422] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.253444] NET: Registered protocol family 2
[ 0.284105] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.284938] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.287093] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.287664] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.287729] TCP reno registered
[ 0.299071] NET: Registered protocol family 1
[ 0.300968] Unpacking initramfs... done
[ 0.319196] Freeing initrd memory: 809k freed
[ 0.319794] Simple Boot Flag at 0x52 set to 0x1
[ 0.321294] audit: initializing netlink socket (disabled)
[ 0.321370] type=2000 audit(1217873492.320:1): initialized
[ 0.324117] VFS: Disk quotas dquot_6.5.1
[ 0.324259] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.325093] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.325970] SGI XFS Quota Management subsystem
[ 0.325970] msgmni has been set to 4024
[ 0.326526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.326594] io scheduler noop registered
[ 0.326813] io scheduler cfq registered (default)
[ 0.427615] pci 0000:01:00.0: Boot video device
[ 0.427741] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.427761] assign_interrupt_mode Found MSI capability
[ 0.427844] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.427899] Allocate Port Service[0000:00:02.0:pcie03]
[ 0.427979] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.427983] assign_interrupt_mode Found MSI capability
[ 0.427983] Allocate Port Service[0000:00:04.0:pcie00]
[ 0.427983] Allocate Port Service[0000:00:04.0:pcie02]
[ 0.427983] Allocate Port Service[0000:00:04.0:pcie03]
[ 0.427983] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.427983] assign_interrupt_mode Found MSI capability
[ 0.427983] Allocate Port Service[0000:00:05.0:pcie00]
[ 0.427983] Allocate Port Service[0000:00:05.0:pcie03]
[ 0.427983] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.427983] assign_interrupt_mode Found MSI capability
[ 0.427983] Allocate Port Service[0000:00:06.0:pcie00]
[ 0.427983] Allocate Port Service[0000:00:06.0:pcie03]
[ 0.428069] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.428088] assign_interrupt_mode Found MSI capability
[ 0.428164] Allocate Port Service[0000:00:07.0:pcie00]
[ 0.428227] Allocate Port Service[0000:00:07.0:pcie03]
[ 0.428415] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.428477] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.430796] pciehp: HPC vendor_id 1002 device_id 7914 ss_vid 0 ss_did 0
[ 0.431211] Load service driver hpdriver on pcie device 0000:00:04.0:pcie02
[ 0.431271] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.431411] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.434698] hpet_resources: 0xfed00000 is busy
[ 0.434868] Non-volatile memory driver v1.2
[ 0.434954] Linux agpgart interface v0.103
[ 0.435730] uvesafb: (C) 1988-2005, ATI Technologies Inc. M64M01.00, M64M01.00, 01.00, OEM: ATI ATOMBIOS(C) 1988-2005, ATI Technologies Inc. M64M01.00, VBE v3.0
[ 0.547958] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 0.547958] Could not switch to high resolution mode on CPU 0
[ 0.547958] lapic is not functional.
[ 0.547958] Could not switch to high resolution mode on CPU 1
[ 0.797027] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 1.117229] uvesafb: monitor limits: vf = 60 Hz, hf = 49 kHz, clk = 71 MHz
[ 1.117416] uvesafb: scrolling: redraw
[ 1.122760] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
[ 1.271055] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
[ 1.425524] Console: switching to colour frame buffer device 128x48
[ 1.425597] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
[ 1.576988] uvesafb: framebuffer at 0xf0000000, mapped to 0xffffc20010980000, using 6144k, total 16384k
[ 1.577019] fb0: VESA VGA frame buffer device
[ 1.577195] vga16fb: initializing
[ 1.577198] vga16fb: mapped to 0xffff8100000a0000
[ 1.577264] fb1: VGA16 VGA frame buffer device
[ 1.577555] ACPI: AC Adapter [AC0] (on-line)
[ 1.577945] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.624944] ACPI: Battery Slot [BAT0] (battery present)
[ 1.624944] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.631963] ACPI: Power Button (FF) [PWRF]
[ 1.631963] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.643962] ACPI: Power Button (CM) [PWRB]
[ 1.643962] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.655962] ACPI: Sleep Button (CM) [SLPB]
[ 1.655962] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.658944] ACPI: Lid Switch [LID]
[ 1.659945] ACPI: device:07 is registered as cooling_device0
[ 1.659945] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input4
[ 1.668962] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.668962] proc_dir_entry 'VGA' already registered
[ 1.668962] Pid: 1, comm: swapper Not tainted 2.6.26-tuxonice-v-fox-laptop #2
[ 1.668962]
[ 1.668962] Call Trace:
[ 1.670137] [<ffffffff8044425b>] idr_get_new+0xb/0x30
[ 1.670137] [<ffffffff8031a094>] proc_register+0x194/0x1c0
[ 1.670137] [<ffffffff8031a2cc>] proc_mkdir_mode+0x3c/0x60
[ 1.671310] [<ffffffff804d3ae0>] acpi_video_bus_add+0x1cb/0xcb3
[ 1.671310] [<ffffffff803238ad>] sysfs_find_dirent+0x2d/0x40
[ 1.671310] [<ffffffff804ccffe>] acpi_device_probe+0x46/0x88
[ 1.671310] [<ffffffff804e8c3e>] driver_probe_device+0x9e/0x1d0
[ 1.671310] [<ffffffff804e8dfb>] __driver_attach+0x8b/0x90
[ 1.671310] [<ffffffff804e8d70>] __driver_attach+0x0/0x90
[ 1.671310] [<ffffffff804e83fb>] bus_for_each_dev+0x5b/0x80
[ 1.671310] [<ffffffff802c0ed5>] kmem_cache_alloc+0x65/0xa0
[ 1.671310] [<ffffffff804e7cd8>] bus_add_driver+0x1f8/0x270
[ 1.671310] [<ffffffff804e8fd9>] driver_register+0x69/0x150
[ 1.671310] [<ffffffff808182e0>] acpi_video_init+0x0/0x5e
[ 1.671310] [<ffffffff8081831c>] acpi_video_init+0x3c/0x5e
[ 1.671310] [<ffffffff807f970c>] kernel_init+0x1ab/0x2b4
[ 1.671310] [<ffffffff8020d278>] child_rip+0xa/0x12
[ 1.671310] [<ffffffff807f9561>] kernel_init+0x0/0x2b4
[ 1.671310] [<ffffffff8020d26e>] child_rip+0x0/0x12
[ 1.671310]
[ 1.678944] ACPI: device:29 is registered as cooling_device1
[ 1.680312] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:24/device:25/input/input5
[ 1.687961] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.687961] ACPI: ACPI0007:00 is registered as cooling_device2
[ 1.689339] ACPI: ACPI0007:01 is registered as cooling_device3
[ 1.695944] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.696962] ACPI: Thermal Zone [THRM] (37 C)
[ 1.697944] loop: module loaded
[ 1.699329] asus-laptop: Asus Laptop Support version 0.42
[ 1.702943] asus-laptop: F3Ke model detected
[ 1.706945] Driver 'sd' needs updating - please use bus_type methods
[ 1.708290] Driver 'sr' needs updating - please use bus_type methods
[ 1.708290] ahci 0000:00:12.0: version 3.0
[ 1.708290] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 1.709392] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.710947] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.710947] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[ 2.711931] scsi0 : ahci
[ 2.711931] scsi1 : ahci
[ 2.713347] scsi2 : ahci
[ 2.713930] scsi3 : ahci
[ 2.713930] ata1: SATA max UDMA/133 abar m1024 at 0xfdeff800 port 0xfdeff900 irq 22
[ 2.714991] ata2: SATA max UDMA/133 abar m1024 at 0xfdeff800 port 0xfdeff980 irq 22
[ 2.714991] ata3: SATA max UDMA/133 abar m1024 at 0xfdeff800 port 0xfdeffa00 irq 22
[ 2.714991] ata4: SATA max UDMA/133 abar m1024 at 0xfdeff800 port 0xfdeffa80 irq 22
[ 3.173870] ata1: softreset failed (device not ready)
[ 3.174284] ata1: failed due to HW bug, retry pmp=0
[ 3.326856] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.327940] ata1.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
[ 3.327940] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.329042] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.329940] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.330926] ata1.00: configured for UDMA/133
[ 3.635855] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.940850] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.245847] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.245928] isa bounce pool size: 16 pages
[ 4.245928] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5
[ 4.247309] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.247925] sd 0:0:0:0: [sda] Write Protect is off
[ 4.247925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.247925] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.247925] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.249335] sd 0:0:0:0: [sda] Write Protect is off
[ 4.249335] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.249335] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.250279] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 4.308912] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.308912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.310230] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.310911] PCI: Setting latency timer of device 0000:00:14.1 to 64
[ 4.310911] scsi4 : pata_atiixp
[ 4.310911] scsi5 : pata_atiixp
[ 4.312912] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 4.312973] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 4.484575] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632H, AS02, max UDMA/33
[ 4.507501] ata5.00: configured for UDMA/33
[ 4.660924] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H AS02 PQ: 0 ANSI: 5
[ 4.675922] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.675922] Uniform CD-ROM driver Revision: 3.20
[ 4.677089] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.677089] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.677907] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 4.680009] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.682323] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.682972] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.683974] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.683974] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.684942] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.684942] mice: PS/2 mouse device common for all mice
[ 4.753924] I2O subsystem v1.325
[ 4.753924] i2o: max drivers = 8
[ 4.754988] I2O Configuration OSM v1.323
[ 4.754988] I2O Block Device OSM v1.325
[ 4.756144] I2O SCSI Peripheral OSM v1.316
[ 4.756144] I2O ProcFS OSM v1.316
[ 4.757327] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 4.757927] rtc0: alarms up to one month, y3k
[ 4.757927] cpuidle: using governor ladder
[ 4.757995] cpuidle: using governor menu
[ 4.758993] NET: Registered protocol family 26
[ 4.760112] arp_tables: (C) 2002 David S. Miller
[ 4.760112] TCP cubic registered
[ 4.760348] Initializing XFRM netlink socket
[ 4.761346] NET: Registered protocol family 17
[ 4.762280] NET: Registered protocol family 15
[ 4.762280] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 processors (2 cpu cores) (version 2.20.00)
[ 4.763671] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12
[ 4.764178] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 4.764668] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 4.765141] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1a
[ 4.766174] TuxOnIce 3.0-rc7 (http://tuxonice.net)
[ 4.766897] rtc_cmos 00:02: setting system clock to 2008-08-04 18:11:38 UTC (1217873498)
[ 4.766897] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 4.785922] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[ 4.970421] Replacing swsusp.
[ 4.987304] TuxOnIce: Normal swapspace found.
[ 4.999919] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[ 5.001353] ReiserFS: sda2: using ordered data mode
[ 5.005918] ReiserFS: sda2: journal params: device sda2, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30
[ 5.008550] ReiserFS: sda2: checking transaction log (sda2)
[ 5.048918] ReiserFS: sda2: Using r5 hash to sort names
[ 5.048918] VFS: Mounted root (reiserfs filesystem) readonly.
[ 5.050398] Freeing unused kernel memory: 408k freed
[ 8.484603] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 8.484646] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 8.484664] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 8.484983] eth0: RTL8168b/8111b at 0xffffc2000037e000, 00:1e:8c:ed:3c:17, XID 38000000 IRQ 314
[ 8.618455] usbcore: registered new interface driver usbfs
[ 8.618491] usbcore: registered new interface driver hub
[ 8.619819] usbcore: registered new device driver usb
[ 8.724859] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[ 8.724859] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 8.724859] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 8.724859] ehci_hcd 0000:00:13.5: debug port 1
[ 8.724859] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfdeff000
[ 8.726858] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.731865] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 8.731865] usb usb1: configuration #1 chosen from 1 choice
[ 8.731865] hub 1-0:1.0: USB hub found
[ 8.731865] hub 1-0:1.0: 10 ports detected
[ 8.757197] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 8.780854] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 8.780854] ricoh-mmc: Copyright(c) Philip Langdale
[ 8.832858] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.832858] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.832858] usb usb1: Product: EHCI Host Controller
[ 8.832858] usb usb1: Manufacturer: Linux 2.6.26-tuxonice-v-fox-laptop ehci_hcd
[ 8.832858] usb usb1: SerialNumber: 0000:00:13.5
[ 8.833860] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.833860] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 8.833860] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 8.833860] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfdefe000
[ 8.870856] sdhci: Secure Digital Host Controller Interface driver
[ 8.870856] sdhci: Copyright(c) Pierre Ossman
[ 8.889852] usb usb2: configuration #1 chosen from 1 choice
[ 8.889852] hub 2-0:1.0: USB hub found
[ 8.889852] hub 2-0:1.0: 2 ports detected
[ 8.991869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.991869] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.991869] usb usb2: Product: OHCI Host Controller
[ 8.991869] usb usb2: Manufacturer: Linux 2.6.26-tuxonice-v-fox-laptop ohci_hcd
[ 8.991869] usb usb2: SerialNumber: 0000:00:13.0
[ 8.991869] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.991869] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 8.991869] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 8.991869] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfdefd000
[ 9.047850] usb usb3: configuration #1 chosen from 1 choice
[ 9.047850] hub 3-0:1.0: USB hub found
[ 9.047850] hub 3-0:1.0: 2 ports detected
[ 9.141867] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
[ 9.149851] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.149851] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.149851] usb usb3: Product: OHCI Host Controller
[ 9.149851] usb usb3: Manufacturer: Linux 2.6.26-tuxonice-v-fox-laptop ohci_hcd
[ 9.149851] usb usb3: SerialNumber: 0000:00:13.1
[ 9.149851] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 9.149851] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 9.149851] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 9.149851] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfdefc000
[ 9.176855] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
[ 9.206855] usb usb4: configuration #1 chosen from 1 choice
[ 9.206855] hub 4-0:1.0: USB hub found
[ 9.206855] hub 4-0:1.0: 2 ports detected
[ 9.307855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.307855] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.307855] usb usb4: Product: OHCI Host Controller
[ 9.307855] usb usb4: Manufacturer: Linux 2.6.26-tuxonice-v-fox-laptop ohci_hcd
[ 9.307855] usb usb4: SerialNumber: 0000:00:13.2
[ 9.307855] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 9.307855] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 9.307855] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 9.307855] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfdefb000
[ 9.363846] usb usb5: configuration #1 chosen from 1 choice
[ 9.363846] hub 5-0:1.0: USB hub found
[ 9.363846] hub 5-0:1.0: 2 ports detected
[ 9.465847] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.465847] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.465847] usb usb5: Product: OHCI Host Controller
[ 9.465847] usb usb5: Manufacturer: Linux 2.6.26-tuxonice-v-fox-laptop ohci_hcd
[ 9.465847] usb usb5: SerialNumber: 0000:00:13.3
[ 9.473847] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
[ 9.473847] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 9.473847] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 9.473847] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfdefa000
[ 9.529845] usb usb6: configuration #1 chosen from 1 choice
[ 9.529845] hub 6-0:1.0: USB hub found
[ 9.529845] hub 6-0:1.0: 2 ports detected
[ 9.575804] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 9.631859] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.631859] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.631859] usb usb6: Product: OHCI Host Controller
[ 9.631859] usb usb6: Manufacturer: Linux 2.6.26-tuxonice-v-fox-laptop ohci_hcd
[ 9.631859] usb usb6: SerialNumber: 0000:00:13.4
[ 9.631860] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.2 [1180:0843] (rev 12)
[ 9.631860] ricoh-mmc: Controller is now disabled.
[ 9.632833] ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 9.689770] firewire_ohci: Added fw-ohci device 0000:08:01.0, OHCI version 1.0
[ 9.689860] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.733859] usb 2-1: configuration #1 chosen from 1 choice
[ 9.735843] usb 2-1: New USB device found, idVendor=046d, idProduct=c01b
[ 9.735843] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.735843] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 9.735843] usb 2-1: Manufacturer: Logitech
[ 9.757860] sdhci: SDHCI controller found at 0000:08:01.1 [1180:0822] (rev 22)
[ 9.758850] ACPI: PCI Interrupt 0000:08:01.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 9.759842] mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 9.760842] Registered led device: mmc0
[ 9.762005] mmc0: SDHCI at 0xfebff400 irq 21 DMA
[ 9.982857] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 10.138856] usb 2-2: configuration #1 chosen from 1 choice
[ 10.140838] usb 2-2: New USB device found, idVendor=046d, idProduct=c313
[ 10.140838] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.140838] usb 2-2: Product: USB Multimedia Keyboard
[ 10.140838] usb 2-2: Manufacturer: BTC
[ 10.140838] usbcore: registered new interface driver hiddev
[ 10.146843] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input10
[ 10.162836] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
[ 10.167854] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input11
[ 10.187855] input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2
[ 10.200853] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input12
[ 10.201857] firewire_core: created device fw0: GUID 001e8c00010b02a3, S400
[ 10.222854] input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2
[ 10.222854] usbcore: registered new interface driver usbhid
[ 10.222854] usbhid: v2.6:USB HID core driver
[ 10.374851] usb 6-1: new full speed USB device using ohci_hcd and address 2
[ 10.621849] usb 6-1: configuration #1 chosen from 1 choice
[ 10.624833] usb 6-1: New USB device found, idVendor=0b05, idProduct=1712
[ 10.624833] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 10.624833] usb 6-1: SerialNumber: 0194E8-5B-0002
[ 10.689226] Bluetooth: HCI USB driver ver 2.9
[ 10.691097] usbcore: registered new interface driver hci_usb
[ 13.027805] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 28.773607] fuse init (API version 7.9)
[ 29.232615] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 29.232615] ReiserFS: sda7: using ordered data mode
[ 29.239615] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30
[ 29.241599] ReiserFS: sda7: checking transaction log (sda7)
[ 29.263614] ReiserFS: sda7: Using r5 hash to sort names
[ 29.348612] XFS mounting filesystem sda8
[ 29.615611] Ending clean XFS mount for filesystem: sda8
[ 30.069605] Clocksource tsc unstable (delta = -77871736 ns)
[ 31.755565] Bluetooth: L2CAP ver 2.9
[ 31.755565] Bluetooth: L2CAP socket layer initialized
[ 31.845570] Bluetooth: RFCOMM socket layer initialized
[ 31.845570] Bluetooth: RFCOMM TTY layer initialized
[ 31.845570] Bluetooth: RFCOMM ver 1.8
[ 31.908265] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 31.908270] Bluetooth: BNEP filters: protocol multicast
[ 31.955563] Bridge firewalling registered
[ 31.955563] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 32.221560] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
[ 35.999517] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 36.000515] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 36.000515] ata1.00: configured for UDMA/133
[ 36.000515] ata1: EH complete
[ 36.000515] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 36.000515] sd 0:0:0:0: [sda] Write Protect is off
[ 36.000515] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.000515] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.984748] r8169: eth0: link up
[ 36.984748] r8169: eth0: link up
[ 43.052679] Adding 4200956k swap on /dev/sda5. Priority:-1 extents:1 across:4200956k
[ 46.771636] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 47.733613] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 48.160619] [drm] Initialized drm 1.1.0 20060810
[ 48.244606] PCI: Unable to reserve mem region #1:8000000 at f0000000 for device 0000:01:00.0
[ 48.245606] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 48.246612] [drm] Initialized radeon 1.29.0 20080613 on minor 0
[ 48.247615] [drm] Used old pci detect: framebuffer loaded
[ 49.916272] [drm] Setting GART location based on new memory map
[ 49.916496] [drm] Loading R500 Microcode
[ 49.916514] [drm] Num pipes: 1
[ 49.916519] [drm] writeback test succeeded in 1 usecs
[ 68.182903] timidity[3064]: segfault at c ip 7f54349adcd4 sp 7fff3ce43b70 error 6 in libasound.so.2.0.0[7f543495b000+c4000]
-------------- next part --------------
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon X2300 [1002:718a] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:1449]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fdff0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00: 02 10 8a 71 07 01 10 00 00 00 00 03 10 00 00 00
10: 08 00 00 f0 01 c0 00 00 00 00 ff fd 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 49 14
30: 00 00 fc fd 50 00 00 00 00 00 00 00 0a 01 00 00
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mesa-9999.7z
Type: application/x-7z
Size: 32038 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-ati/attachments/20080804/50ebbec9/attachment-0006.bin
-------------- next part --------------
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_swap_control, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_visual_select_group
OpenGL vendor string: DRI R300 Project
OpenGL renderer string: Mesa DRI R300 20060815 TCL
OpenGL version string: 1.3 Mesa 7.1 rc3
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_MESAX_texture_float, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_convolution,
GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_gpu_program_parameters, GL_EXT_histogram, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
OpenGL limits:
GL_MAX_ATTRIB_STACK_DEPTH = 16
GL_MAX_CLIENT_ATTRIB_STACK_DEPTH = 16
GL_MAX_CLIP_PLANES = 6
GL_MAX_COLOR_MATRIX_STACK_DEPTH = 4
GL_MAX_ELEMENTS_VERTICES = 3000
GL_MAX_ELEMENTS_INDICES = 3000
GL_MAX_EVAL_ORDER = 30
GL_MAX_LIGHTS = 8
GL_MAX_LIST_NESTING = 64
GL_MAX_MODELVIEW_STACK_DEPTH = 32
GL_MAX_NAME_STACK_DEPTH = 64
GL_MAX_PIXEL_MAP_TABLE = 256
GL_MAX_PROJECTION_STACK_DEPTH = 32
GL_MAX_TEXTURE_STACK_DEPTH = 10
GL_MAX_TEXTURE_SIZE = 4096
GL_MAX_3D_TEXTURE_SIZE = 256
GL_MAX_VIEWPORT_DIMS = 4096, 4096
GL_ALIASED_LINE_WIDTH_RANGE = 1, 10922
GL_SMOOTH_LINE_WIDTH_RANGE = 1, 10922
GL_ALIASED_POINT_SIZE_RANGE = 1, 10922
GL_SMOOTH_POINT_SIZE_RANGE = 1, 10922
GL_MAX_CUBE_MAP_TEXTURE_SIZE_ARB = 2048
GL_NUM_COMPRESSED_TEXTURE_FORMATS_ARB = 0
GL_MAX_TEXTURE_UNITS_ARB = 8
GL_MAX_TEXTURE_LOD_BIAS_EXT = 16
GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT = 16
GL_MAX_CONVOLUTION_WIDTH/HEIGHT = 9, 9
GL_VERTEX_PROGRAM_ARB:
GL_MAX_PROGRAM_INSTRUCTIONS_ARB = 255
GL_MAX_PROGRAM_NATIVE_INSTRUCTIONS_ARB = 255
GL_MAX_PROGRAM_TEMPORARIES_ARB = 32
GL_MAX_PROGRAM_NATIVE_TEMPORARIES_ARB = 32
GL_MAX_PROGRAM_PARAMETERS_ARB = 128
GL_MAX_PROGRAM_NATIVE_PARAMETERS_ARB = 256
GL_MAX_PROGRAM_ATTRIBS_ARB = 16
GL_MAX_PROGRAM_NATIVE_ATTRIBS_ARB = 16
GL_MAX_PROGRAM_ADDRESS_REGISTERS_ARB = 1
GL_MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB = 1
GL_MAX_PROGRAM_LOCAL_PARAMETERS_ARB = 128
GL_MAX_PROGRAM_ENV_PARAMETERS_ARB = 128
GL_MAX_PROGRAM_ALU_INSTRUCTIONS_ARB = 128
GL_MAX_PROGRAM_TEX_INSTRUCTIONS_ARB = 128
GL_MAX_PROGRAM_TEX_INDIRECTIONS_ARB = 128
GL_MAX_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB = 128
GL_MAX_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB = 128
GL_MAX_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB = 128
GL_FRAGMENT_PROGRAM_ARB:
GL_MAX_PROGRAM_INSTRUCTIONS_ARB = 1024
GL_MAX_PROGRAM_NATIVE_INSTRUCTIONS_ARB = 128
GL_MAX_PROGRAM_TEMPORARIES_ARB = 128
GL_MAX_PROGRAM_NATIVE_TEMPORARIES_ARB = 32
GL_MAX_PROGRAM_PARAMETERS_ARB = 64
GL_MAX_PROGRAM_NATIVE_PARAMETERS_ARB = 16
GL_MAX_PROGRAM_ATTRIBS_ARB = 12
GL_MAX_PROGRAM_NATIVE_ATTRIBS_ARB = 11
GL_MAX_PROGRAM_ADDRESS_REGISTERS_ARB = 0
GL_MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB = 0
GL_MAX_PROGRAM_LOCAL_PARAMETERS_ARB = 128
GL_MAX_PROGRAM_ENV_PARAMETERS_ARB = 128
GL_MAX_PROGRAM_ALU_INSTRUCTIONS_ARB = 48
GL_MAX_PROGRAM_TEX_INSTRUCTIONS_ARB = 24
GL_MAX_PROGRAM_TEX_INDIRECTIONS_ARB = 4
GL_MAX_PROGRAM_NATIVE_ALU_INSTRUCTIONS_ARB = 64
GL_MAX_PROGRAM_NATIVE_TEX_INSTRUCTIONS_ARB = 64
GL_MAX_PROGRAM_NATIVE_TEX_INDIRECTIONS_ARB = 4
Vis Vis Visual Trans buff lev render DB ste r g b a aux dep ste accum buffers MS MS
ID Depth Type parent size el type reo sz sz sz sz buf th ncl r g b a num bufs
----------------------------------------------------------------------------------------------------
0x21 24 TrueColor 0 32 0 rgba 1 0 8 8 8 8 0 24 8 0 0 0 0 0 0
0x22 24 DirectColor 0 32 0 rgba 1 0 8 8 8 8 0 24 8 0 0 0 0 0 0
0x54 32 TrueColor 0 32 0 rgba 0 0 8 8 8 8 0 24 0 0 0 0 0 0 0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: x11-drm-99999999.7z
Type: application/x-7z
Size: 36855 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-ati/attachments/20080804/50ebbec9/attachment-0007.bin
-------------- next part --------------
Portage 2.2_rc6 (default/linux/amd64/2008.0/desktop, gcc-4.3.1, glibc-2.8_p20080602-r0, 2.6.26-tuxonice-v-fox-laptop x86_64)
=================================================================
System uname: Linux-2.6.26-tuxonice-v-fox-laptop-x86_64-AMD_Athlon-tm-_64_X2_Dual-Core_Processor_TK-57-with-glibc2.2.5
Timestamp of tree: Sun, 03 Aug 2008 19:03:01 +0000
distcc 2.18.3 x86_64-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled]
app-shells/bash: 3.2_p39
dev-lang/python: 2.4.4-r13, 2.5.2-r7
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 2.0.0
sys-apps/openrc: 0.2.5
sys-apps/sandbox: 1.2.18.1-r3
sys-devel/autoconf: 2.13, 2.62-r1
sys-devel/automake: 1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.1-r1
sys-devel/binutils: 2.18-r3
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 2.2.4
virtual/os-headers: 2.6.25-r4
ACCEPT_KEYWORDS="amd64 ~amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8-sse3 -O2 -Wno-error -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/splash /etc/terminfo /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-march=k8-sse3 -O2 -Wno-error -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks fixpackages parallel-fetch preserve-libs sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://ftp.roedu.net/pub/mirrors/gentoo.org/ http://gentoo.tiscali.nl/ http://ftp.dei.uc.pt/pub/linux/gentoo/ http://gentoo.virginmedia.com/ http://fido.online.kz/gentoo"
LANG="ru_RU.UTF-8"
LC_ALL=""
LDFLAGS="-Wl,--enable-new-dtags -Wl,--hash-style=gnu -Wl,-O1"
LINGUAS="ru en"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/portage/local/layman/berkano /usr/portage/local/layman/x11 /usr/portage/local/layman/lila-theme /usr/portage/local/layman/x11 /usr/portage/local/v-fox"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext 3ds 64bit 7zip X Xaw3d Xorg a52 aac aalib ace acl acpi addbookmarks alias alsa amarok amd64 ao apache2 async audiofile autoreplace bash-completion bluetooth branding bzip2 cairo cap caps cardbus cdb cddb cdparanoia cdr cdrom cg charconv chm chroot cisco cli colordiff compress connectionstatus contactnotes cpio cracklib crypt css cups curl curlwrappers curses cyrillic dbus dedicated dhcp dia dialup directfb disk-partition diskio divx djvu dlz dmi dmx dri dts dv dvb dvd dvdnav dvdr dvdread dynamicplugin elf emboss emovix enca encode erandom evdev examples exif expat fam fame fat fbcon fbcondecor fbdev fbsplash ffmpeg firefox flac foomaticdb fortran ftp gd gdbm geoip geos ggi gif glibc-omitfp gpm gre groupwise gsm gtk h264 h323 hal hda-intel hddtemp highlight history html iconv icq ieee1394 imagemagick imlib ipv6 irc isdnlog jabber jingle john joystick jpeg jpeg2k kde kdexdeltas kerberos keyboard kqemu lame laptop latex lcms libcaca libnotify libsamplerate libssh2 libwww lighttpd live lm_sensors login-watch logitech-mouse logrotate lzo mad matroska md5sum midi mikmod mime mjpeg mmap mmx mmxext mng mouse mp2 mp3 mp4 mpeg mplayer msn mudflap multilib musepack nas ncurses neXt netboot netmeeting network network-cron nls nntp nowlistening nptl nptlonly nsplugin ntfs objc objc++ objc-gc offensive ogg openal openexr opengl openmp openssl openvpn oscar pam pcmcia pcntl pcre pdf perl php physfs plugins png pnm portaudio posix ppds pppd pptp python qemu qt3 qt3support qt4 quicktime radio rar rdesktop readline reflection reiser4 reiserfs rtc samba sametime scanner scsi sdl session sharedext shorten skey slang slp smp sms sockets socks5 sox speex spell spl sqlite sqlite3 srt sse sse2 sse3 ssh ssl ssse3 startup-notification statistics subtitles svg symlink sysfs tcpd tftp tga theora threads tiff timidity truetype udev unicode upnp urandom usb utf8 uuencode v4l v4l2 vcd vesa vesafb vhosts videos vorbis wavpack wddx webpresence wifi winpopup wma wmf wmp x264 xattr xcb xcomposite xface xfs xine xml xorg xosd xpm xscreensaver xv xvid yahoo zip zlib zsh-completion" ALSA_CARDS="hda-intel hda-codec-analog hda-codec-atihdmi hda-codec-cmedia hda-codec-conexant hda-codec-realtek hda-codec-si3054 hda-codec-sigmatel hda-codec-via hda-generic hda-hwdep hda-power-save hpet seq-rtctimer-default virmidi rtctimer" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info log_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status unique_id userdir usertrack vhost_alias" APACHE2_MPMS="worker" ELIBC="glibc" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="ru en" LIRC_DEVICES="audio_alsa devinput inputlirc usb usbx" USERLAND="GNU" VIDEO_CARDS="radeon radeonhd fbdev v4l"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
-------------- next part --------------
A non-text attachment was scrubbed...
Name: libdrm-9999.7z
Type: application/x-7z
Size: 29852 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-ati/attachments/20080804/50ebbec9/attachment-0008.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xf86-video-ati-6.9.0.7z
Type: application/x-7z
Size: 27655 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-ati/attachments/20080804/50ebbec9/attachment-0009.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xorg-server-1.4.99.906.7z
Type: application/x-7z
Size: 43615 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-ati/attachments/20080804/50ebbec9/attachment-0010.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: text/x-log
Size: 40805 bytes
Desc: not available
Url : http://lists.x.org/archives/xorg-driver-ati/attachments/20080804/50ebbec9/attachment-0011.bin
More information about the xorg-driver-ati
mailing list