[PATCH] Make pm2's xv driver collect options like all other drivers.

Sun Dec 5 10:27:14 PST 2010

> From: Jesse Adkins <jesserayadkins at gmail.com>
> Date: Thu, 11 Nov 2010 19:48:37 -0800
> 
> The current method of argument collection is to collect options from
> different ports of a VideoAdaptor record. Specifically, the ports
> had to be named 'Input' for input options, and 'Output' for output
> options.
> 
> This resulted in three groups of options, requiring people to know what
> VideoAdaptor does, both of which were not documented in the man page. If you
> forgot to create a VideoAdaptor port, then the xv driver would just not work.
> 
> This patch makes the xv driver collect options from the screen, like every
> single other driver. Input and Output prefixes are used for options where the
> input and output ports have the same args (FramesPerSec, for example).
> Documentation added for the change.
> 
> This is a step toward getting rid of VideoAdaptor, since only glint uses it
> (and is probably the only one to have used it).
> 
> Signed-off-by: Jesse Adkins <jesserayadkins at gmail.com>

Ok, I tested this diff on OpenBSD/sparc64, with a TechSource Raptor
GFX aka Sun PGX32 graphics card on a Sun Blade 1000 workstation:

gfxp0 at pci0 dev 3 function 0 "3D Labs Permedia 2v" rev 0x01
gfxp0: GFXP, 1152x900

The PCI vendor ID is 0x3d3d and the product ID is 0x0009.

Using mplayer to play some .wmv and .avi files produces video in the
wrong colors, both with and without this diff.  I'll see if I can
figure out what's going wrong here.

One difference I did notice is that with this diff, the following line
appeared in Xorg.0.log:

[3082575.103] (--) GLINT(0): No Xv vio support for this board

This line wasn't there before your diff.  Can you explain why it
suddenly shows up?

Cheers,

Mark

[3082574.273] (--) Using wscons driver
[3082574.355] 
X.Org X Server 1.8.2
Release Date: 2010-07-01
[3082574.355] X Protocol Version 11, Revision 0
[3082574.355] Build Operating System: OpenBSD 4.8 sparc64 
[3082574.356] Current Operating System: OpenBSD bruckner.sibelius.xs4all.nl 4.8 GENERIC.MP#7 sparc64
[3082574.357] Build Date: 27 November 2010  07:00:20PM
[3082574.357]  
[3082574.360] Current version of pixman: 0.20.0
[3082574.360] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[3082574.360] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[3082574.361] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec  5 19:12:43 2010
[3082574.430] (II) Loader magic: 0x4b7588
[3082574.430] (II) Module ABI versions:
[3082574.430] 	X.Org ANSI C Emulation: 0.4
[3082574.430] 	X.Org Video Driver: 7.0
[3082574.430] 	X.Org XInput driver : 9.0
[3082574.430] 	X.Org Server Extension : 3.0
[3082574.473] (--) PCI:*(0:0:3:0) 3d3d:0009:1227:0006 3D Labs Permedia 2v rev 1, Mem @ 0x00140000/131072, 0x02000000/8388608, 0x02800000/8388608, BIOS @ 0x????????/65536
[3082574.475] (==) Using default built-in configuration (12 lines)
[3082574.475] (==) --- Start of built-in configuration ---
[3082574.475] 	Section "Device"
[3082574.475] 		Identifier	"Builtin Default glint Device 0"
[3082574.475] 		Driver	"glint"
[3082574.475] 	EndSection
[3082574.475] 	Section "Screen"
[3082574.475] 		Identifier	"Builtin Default glint Screen 0"
[3082574.475] 		Device	"Builtin Default glint Device 0"
[3082574.475] 	EndSection
[3082574.475] 	Section "ServerLayout"
[3082574.475] 		Identifier	"Builtin Default Layout"
[3082574.475] 		Screen	"Builtin Default glint Screen 0"
[3082574.475] 	EndSection
[3082574.475] (==) --- End of built-in configuration ---
[3082574.478] (==) ServerLayout "Builtin Default Layout"
[3082574.478] (**) |-->Screen "Builtin Default glint Screen 0" (0)
[3082574.478] (**) |   |-->Monitor "<default monitor>"
[3082574.480] (**) |   |-->Device "Builtin Default glint Device 0"
[3082574.480] (==) No monitor specified for screen "Builtin Default glint Screen 0".
	Using a default monitor configuration.
[3082574.480] (==) Disabling SIGIO handlers for input devices
[3082574.480] (==) Not automatically adding devices
[3082574.480] (==) Not automatically enabling devices
[3082574.591] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[3082574.591] (==) ModulePath set to "/usr/X11R6/lib/modules"
[3082574.591] (==) |-->Input Device "<default pointer>"
[3082574.591] (==) |-->Input Device "<default keyboard>"
[3082574.591] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[3082574.591] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[3082574.591] (II) LoadModule: "extmod"
[3082574.617] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[3082574.635] (II) Module extmod: vendor="X.Org Foundation"
[3082574.638] 	compiled for 1.8.2, module version = 1.0.0
[3082574.638] 	Module class: X.Org Server Extension
[3082574.638] 	ABI class: X.Org Server Extension, version 3.0
[3082574.638] (II) Loading extension MIT-SCREEN-SAVER
[3082574.639] (II) Loading extension XFree86-VidModeExtension
[3082574.639] (II) Loading extension XFree86-DGA
[3082574.639] (II) Loading extension DPMS
[3082574.639] (II) Loading extension XVideo
[3082574.643] (II) Loading extension XVideo-MotionCompensation
[3082574.643] (II) Loading extension X-Resource
[3082574.644] (II) LoadModule: "dbe"
[3082574.645] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[3082574.651] (II) Module dbe: vendor="X.Org Foundation"
[3082574.651] 	compiled for 1.8.2, module version = 1.0.0
[3082574.651] 	Module class: X.Org Server Extension
[3082574.651] 	ABI class: X.Org Server Extension, version 3.0
[3082574.651] (II) Loading extension DOUBLE-BUFFER
[3082574.652] (II) LoadModule: "glx"
[3082574.653] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[3082574.692] (II) Module glx: vendor="X.Org Foundation"
[3082574.698] 	compiled for 1.8.2, module version = 1.0.0
[3082574.698] 	ABI class: X.Org Server Extension, version 3.0
[3082574.703] (==) AIGLX enabled
[3082574.703] (II) Loading extension GLX
[3082574.703] (II) LoadModule: "record"
[3082574.705] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[3082574.712] (II) Module record: vendor="X.Org Foundation"
[3082574.712] 	compiled for 1.8.2, module version = 1.13.0
[3082574.712] 	Module class: X.Org Server Extension
[3082574.712] 	ABI class: X.Org Server Extension, version 3.0
[3082574.712] (II) Loading extension RECORD
[3082574.712] (II) LoadModule: "dri"
[3082574.713] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[3082574.740] (II) Module dri: vendor="X.Org Foundation"
[3082574.740] 	compiled for 1.8.2, module version = 1.0.0
[3082574.740] 	ABI class: X.Org Server Extension, version 3.0
[3082574.741] (II) Loading extension XFree86-DRI
[3082574.742] (II) LoadModule: "dri2"
[3082574.744] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[3082574.750] (II) Module dri2: vendor="X.Org Foundation"
[3082574.750] 	compiled for 1.8.2, module version = 1.2.0
[3082574.750] 	ABI class: X.Org Server Extension, version 3.0
[3082574.750] (II) Loading extension DRI2
[3082574.750] (II) LoadModule: "glint"
[3082574.751] (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.so
[3082574.776] (II) Module glint: vendor="X.Org Foundation"
[3082574.777] 	compiled for 1.8.2, module version = 1.2.5
[3082574.777] 	Module class: X.Org Video Driver
[3082574.777] 	ABI class: X.Org Video Driver, version 7.0
[3082574.781] (II) LoadModule: "mouse"
[3082574.789] (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
[3082574.813] (II) Module mouse: vendor="X.Org Foundation"
[3082574.813] 	compiled for 1.8.2, module version = 1.6.0
[3082574.813] 	Module class: X.Org XInput Driver
[3082574.813] 	ABI class: X.Org XInput driver, version 9.0
[3082574.813] (II) LoadModule: "kbd"
[3082574.816] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[3082574.823] (II) Module kbd: vendor="X.Org Foundation"
[3082574.823] 	compiled for 1.8.2, module version = 1.4.0
[3082574.823] 	Module class: X.Org XInput Driver
[3082574.823] 	ABI class: X.Org XInput driver, version 9.0
[3082574.824] (II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
	pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
[3082574.824] (II) Primary Device is: PCI 00 at 00:03:0
[3082574.824] (WW) Falling back to old probe method for glint
[3082574.824] (--) Assigning device section with no busID to primary device
[3082574.824] (--) Chipset pm2v found
[3082574.824] (WW) Can't map IO space!
[3082574.825] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[3082574.829] (II) GLINT(0): Creating default Display subsection in Screen section
	"Builtin Default glint Screen 0" for depth/fbbpp 24/32
[3082574.830] (==) GLINT(0): Depth 24, (--) framebuffer bpp 32
[3082574.830] (==) GLINT(0): RGB weight 888
[3082574.830] (==) GLINT(0): Default visual is TrueColor
[3082574.830] (==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
[3082574.838] (==) GLINT(0): Using HW cursor
[3082574.838] (--) GLINT(0): Not using Linux framebuffer device
[3082574.838] (--) GLINT(0): Chipset: "pm2v"
[3082574.839] (--) GLINT(0): Linear framebuffer at 0x2800000
[3082574.839] (--) GLINT(0): MMIO registers at 0x150000
[3082574.844] (--) GLINT(0): VideoRAM: 8192 kByte
[3082574.844] (II) Loading sub module "ramdac"
[3082574.844] (II) LoadModule: "ramdac"
[3082574.844] (II) Module "ramdac" already built-in
[3082574.852] (--) GLINT(0): FIFO Size is 256 DWORDS
[3082574.852] (==) GLINT(0): Min pixel clock is 16 MHz
[3082574.852] (--) GLINT(0): Max pixel clock is 110 MHz
[3082574.852] (II) Loading sub module "ddc"
[3082574.852] (II) LoadModule: "ddc"
[3082574.852] (II) Module "ddc" already built-in
[3082574.852] (II) Loading sub module "i2c"
[3082574.852] (II) LoadModule: "i2c"
[3082574.852] (II) Module "i2c" already built-in
[3082574.852] (II) GLINT(0): I2C bus "DDC" initialized.
[3082574.852] (II) GLINT(0): I2C bus "Video" initialized.
[3082574.853] (II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0.
[3082574.864] (II) GLINT(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
[3082574.864] (II) GLINT(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[3082574.865] (WW) GLINT(0): Unable to estimate virtual size
[3082574.865] (II) GLINT(0): Clock range:  16.25 to 110.00 MHz
[3082574.865] (II) GLINT(0): Not using default mode "640x350" (vrefresh out of range)
[3082574.865] (II) GLINT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "640x400" (vrefresh out of range)
[3082574.865] (II) GLINT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "720x400" (vrefresh out of range)
[3082574.865] (II) GLINT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "640x480" (vrefresh out of range)
[3082574.865] (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "640x480" (vrefresh out of range)
[3082574.865] (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "640x480" (hsync out of range)
[3082574.865] (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[3082574.865] (II) GLINT(0): Not using default mode "800x600" (hsync out of range)
[3082574.865] (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "800x600" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "800x600" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1024x768" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1024x768" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1024x768" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1024x768" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1152x864" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1280x960" (hsync out of range)
[3082574.866] (II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
[3082574.866] (II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1280x1024" (hsync out of range)
[3082574.867] (II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
[3082574.867] (II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[3082574.867] (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
[3082574.868] (II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
[3082574.868] (II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
[3082574.868] (II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
[3082574.868] (II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
[3082574.868] (II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "832x624" (hsync out of range)
[3082574.868] (II) GLINT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
[3082574.868] (II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
[3082574.868] (II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[3082574.868] (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
[3082574.869] (II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[3082574.869] (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
[3082574.869] (II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[3082574.870] (--) GLINT(0): Virtual size is 800x600 (pitch 800)
[3082574.870] (**) GLINT(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[3082574.870] (II) GLINT(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[3082574.870] (**) GLINT(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[3082574.871] (II) GLINT(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[3082574.871] (**) GLINT(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[3082574.871] (II) GLINT(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[3082574.871] (==) GLINT(0): DPI set to (96, 96)
[3082574.871] (II) Loading sub module "fb"
[3082574.871] (II) LoadModule: "fb"
[3082574.874] (II) Loading /usr/X11R6/lib/modules/libfb.so
[3082574.890] (II) Module fb: vendor="X.Org Foundation"
[3082574.890] 	compiled for 1.8.2, module version = 1.0.0
[3082574.890] 	ABI class: X.Org ANSI C Emulation, version 0.4
[3082574.890] (II) Loading sub module "xaa"
[3082574.890] (II) LoadModule: "xaa"
[3082574.894] (II) Loading /usr/X11R6/lib/modules/libxaa.so
[3082574.907] (II) Module xaa: vendor="X.Org Foundation"
[3082574.919] 	compiled for 1.8.2, module version = 1.2.1
[3082574.919] 	ABI class: X.Org Video Driver, version 7.0
[3082574.919] (--) Depth 24 pixmap format is 32 bpp
[3082575.071] (II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
[3082575.071] 	Screen to screen bit blits
[3082575.071] 	Solid filled rectangles
[3082575.071] 	8x8 mono pattern filled rectangles
[3082575.071] 	Indirect CPU to Screen color expansion
[3082575.071] 	Solid Lines
[3082575.071] 	Driver provided WriteBitmap replacement
[3082575.071] 	Driver provided WritePixmap replacement
[3082575.076] 	Setting up tile and stipple cache:
[3082575.076] 		32 128x128 slots
[3082575.076] 		8 256x256 slots
[3082575.085] (==) GLINT(0): Backing store disabled
[3082575.085] (==) GLINT(0): Silken mouse disabled
[3082575.102] (==) GLINT(0): DPMS enabled
[3082575.103] (--) GLINT(0): No Xv vio support for this board
[3082575.103] (II) GLINT(0): Initializing Xv driver rev. 4
[3082575.105] (II) GLINT(0): Xv frontend scaler enabled
[3082575.111] (==) RandR enabled
[3082575.111] (II) Initializing built-in extension Generic Event Extension
[3082575.111] (II) Initializing built-in extension SHAPE
[3082575.111] (II) Initializing built-in extension MIT-SHM
[3082575.111] (II) Initializing built-in extension XInputExtension
[3082575.111] (II) Initializing built-in extension XTEST
[3082575.112] (II) Initializing built-in extension BIG-REQUESTS
[3082575.112] (II) Initializing built-in extension SYNC
[3082575.112] (II) Initializing built-in extension XKEYBOARD
[3082575.112] (II) Initializing built-in extension XC-MISC
[3082575.112] (II) Initializing built-in extension XINERAMA
[3082575.112] (II) Initializing built-in extension XFIXES
[3082575.112] (II) Initializing built-in extension RENDER
[3082575.112] (II) Initializing built-in extension RANDR
[3082575.112] (II) Initializing built-in extension COMPOSITE
[3082575.112] (II) Initializing built-in extension DAMAGE
[3082575.225] (II) AIGLX: Screen 0 is not DRI2 capable
[3082575.229] (II) AIGLX: Screen 0 is not DRI capable
[3082575.405] (II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
[3082575.405] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[3082577.219] (WW) <default pointer>: No Device specified, looking for one...
[3082577.220] (II) <default pointer>: found Device "/dev/wsmouse"
[3082577.247] (**) <default pointer>: Protocol: WSMouse
[3082577.248] (**) Option "CorePointer"
[3082577.248] (**) <default pointer>: always reports core events
[3082577.248] (**) Option "Device" "/dev/wsmouse"
[3082577.277] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[3082577.278] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[3082577.278] (**) <default pointer>: Buttons: 9
[3082577.278] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
[3082577.278] (**) <default pointer>: (accel) keeping acceleration scheme 1
[3082577.278] (**) <default pointer>: (accel) acceleration profile 0
[3082577.279] (**) <default pointer>: (accel) acceleration factor: 2.000
[3082577.279] (**) <default pointer>: (accel) acceleration threshold: 4
[3082577.280] (**) Option "CoreKeyboard"
[3082577.280] (**) <default keyboard>: always reports core events
[3082577.280] (**) Option "Protocol" "standard"
[3082577.280] (**) <default keyboard>: Protocol: standard
[3082577.280] (--) <default keyboard>: using wscons layout us
[3082577.280] (**) Option "XkbRules" "xorg"
[3082577.281] (**) <default keyboard>: XkbRules: "xorg"
[3082577.281] (**) Option "XkbModel" "pc105"
[3082577.281] (**) <default keyboard>: XkbModel: "pc105"
[3082577.281] (**) Option "XkbLayout" "us"
[3082577.281] (**) <default keyboard>: XkbLayout: "us"
[3082577.281] (**) Option "CustomKeycodes" "off"
[3082577.281] (**) <default keyboard>: CustomKeycodes disabled
[3082577.281] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)