[Intel-gfx] [PATCH 14/15] drm/i915: Call .update_primary_plane in intel_{enable, disable}_primary_hw_plane()
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Jun 6 10:40:14 CEST 2014
On Thu, Jun 05, 2014 at 05:02:31PM -0700, Matt Roper wrote:
> On Thu, Jun 05, 2014 at 07:16:03PM +0300, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Make the intel_{enable,disable}_primary_hw_plane() simply call
> > .update_primary_plane(), thus eliminating the rmw from these functions
> > which should help the poor old 830M.
> >
> > Now we can also remove the .update_primary_plane() from the
> > .crtc_enable() hooks.
>
> This is because intel_crtc_enable_planes() ->
> intel_enable_primary_hw_plane() takes care of it for us, right?
Yes.
> Can you
> clarify that in the message? That wasn't immediately obvious from the
> context visible in the diff.
Can do.
>
> > This also has the nice benefit of making primary planes a bit closer to
> > the way we handle sprite planes during modesets.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
>
> On a somewhat related note, is there any reason not to call
> .update_primary_plane() at the end of the various sprite update
> functions in intel_sprite.c instead of calling
> intel_update_primary_plane() and intel_flush_primary_plane()? I find
> the name similarity between intel_update_primary_plane() and
> .update_primary_plane() confusing and it looks like we might be able to
> consolidate a bit there unless I'm overlooking something.
I simply decided to leave the sprite code alone for now. Should probably
just call the .update_primary_plane hook there as well. It doesn't seem
too heavy to really compromise the atomic vblank evade thing. Though
at some point we should really start building up the plane_config thing
and then we should be able to minimize the amont of stuff we do in
that section.
>
>
> Matt
>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 92 +++++++++++-------------------------
> > 1 file changed, 27 insertions(+), 65 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 74bbab9..098017a 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -2147,63 +2147,51 @@ void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
> >
> > /**
> > * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
> > - * @dev_priv: i915 private structure
> > - * @plane: plane to enable
> > - * @pipe: pipe being fed
> > + * @plane: plane to be enabled
> > + * @crtc: crtc for the plane
> > *
> > - * Enable @plane on @pipe, making sure that @pipe is running first.
> > + * Enable @plane on @crtc, making sure that the pipe is running first.
> > */
> > -static void intel_enable_primary_hw_plane(struct drm_i915_private *dev_priv,
> > - enum plane plane, enum pipe pipe)
> > +static void intel_enable_primary_hw_plane(struct drm_plane *plane,
> > + struct drm_crtc *crtc)
> > {
> > - struct intel_crtc *intel_crtc =
> > - to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
> > - int reg;
> > - u32 val;
> > + struct drm_i915_private *dev_priv = crtc->dev->dev_private;
> > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> >
> > /* If the pipe isn't enabled, we can't pump pixels and may hang */
> > - assert_pipe_enabled(dev_priv, pipe);
> > + assert_pipe_enabled(dev_priv, intel_crtc->pipe);
> >
> > if (intel_crtc->primary_enabled)
> > return;
> >
> > intel_crtc->primary_enabled = true;
> >
> > - reg = DSPCNTR(plane);
> > - val = I915_READ(reg);
> > - WARN_ON(val & DISPLAY_PLANE_ENABLE);
> > -
> > - I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
> > - intel_flush_primary_plane(dev_priv, plane);
> > + dev_priv->display.update_primary_plane(crtc, plane->fb,
> > + crtc->x, crtc->y);
> > }
> >
> > /**
> > * intel_disable_primary_hw_plane - disable the primary hardware plane
> > - * @dev_priv: i915 private structure
> > - * @plane: plane to disable
> > - * @pipe: pipe consuming the data
> > + * @plane: plane to be disabled
> > + * @crtc: crtc for the plane
> > *
> > - * Disable @plane; should be an independent operation.
> > + * Disable @plane on @crtc, making sure that the pipe is running first.
> > */
> > -static void intel_disable_primary_hw_plane(struct drm_i915_private *dev_priv,
> > - enum plane plane, enum pipe pipe)
> > +static void intel_disable_primary_hw_plane(struct drm_plane *plane,
> > + struct drm_crtc *crtc)
> > {
> > - struct intel_crtc *intel_crtc =
> > - to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
> > - int reg;
> > - u32 val;
> > + struct drm_i915_private *dev_priv = crtc->dev->dev_private;
> > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > +
> > + assert_pipe_enabled(dev_priv, intel_crtc->pipe);
> >
> > if (!intel_crtc->primary_enabled)
> > return;
> >
> > intel_crtc->primary_enabled = false;
> >
> > - reg = DSPCNTR(plane);
> > - val = I915_READ(reg);
> > - WARN_ON((val & DISPLAY_PLANE_ENABLE) == 0);
> > -
> > - I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
> > - intel_flush_primary_plane(dev_priv, plane);
> > + dev_priv->display.update_primary_plane(crtc, plane->fb,
> > + crtc->x, crtc->y);
> > }
> >
> > static bool need_vtd_wa(struct drm_device *dev)
> > @@ -3955,11 +3943,10 @@ static void intel_crtc_enable_planes(struct drm_crtc *crtc)
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > int pipe = intel_crtc->pipe;
> > - int plane = intel_crtc->plane;
> >
> > drm_vblank_on(dev, pipe);
> >
> > - intel_enable_primary_hw_plane(dev_priv, plane, pipe);
> > + intel_enable_primary_hw_plane(crtc->primary, crtc);
> > intel_enable_planes(crtc);
> > /* The fixup needs to happen before cursor is enabled */
> > if (IS_G4X(dev))
> > @@ -3993,7 +3980,7 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc)
> > intel_crtc_dpms_overlay(intel_crtc, false);
> > intel_crtc_update_cursor(crtc, false);
> > intel_disable_planes(crtc);
> > - intel_disable_primary_hw_plane(dev_priv, plane, pipe);
> > + intel_disable_primary_hw_plane(crtc->primary, crtc);
> >
> > drm_vblank_off(dev, pipe);
> > }
> > @@ -4026,9 +4013,6 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
> >
> > ironlake_set_pipeconf(crtc);
> >
> > - dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
> > - crtc->x, crtc->y);
> > -
> > intel_crtc->active = true;
> >
> > intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
> > @@ -4133,9 +4117,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
> >
> > intel_set_pipe_csc(crtc);
> >
> > - dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
> > - crtc->x, crtc->y);
> > -
> > intel_crtc->active = true;
> >
> > intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
> > @@ -4614,7 +4595,6 @@ static void valleyview_modeset_global_resources(struct drm_device *dev)
> > static void valleyview_crtc_enable(struct drm_crtc *crtc)
> > {
> > struct drm_device *dev = crtc->dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > struct intel_encoder *encoder;
> > int pipe = intel_crtc->pipe;
> > @@ -4634,9 +4614,6 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
> >
> > i9xx_set_pipeconf(intel_crtc);
> >
> > - dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
> > - crtc->x, crtc->y);
> > -
> > intel_crtc->active = true;
> >
> > intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
> > @@ -4686,7 +4663,6 @@ static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
> > static void i9xx_crtc_enable(struct drm_crtc *crtc)
> > {
> > struct drm_device *dev = crtc->dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > struct intel_encoder *encoder;
> > int pipe = intel_crtc->pipe;
> > @@ -4705,9 +4681,6 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
> >
> > i9xx_set_pipeconf(intel_crtc);
> >
> > - dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
> > - crtc->x, crtc->y);
> > -
> > intel_crtc->active = true;
> >
> > if (!IS_GEN2(dev))
> > @@ -10854,7 +10827,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
> > ret = intel_set_mode(set->crtc, set->mode,
> > set->x, set->y, set->fb);
> > } else if (config->fb_changed) {
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
> >
> > intel_crtc_wait_for_pending_flips(set->crtc);
> > @@ -10868,8 +10840,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
> > */
> > if (!intel_crtc->primary_enabled && ret == 0) {
> > WARN_ON(!intel_crtc->active);
> > - intel_enable_primary_hw_plane(dev_priv, intel_crtc->plane,
> > - intel_crtc->pipe);
> > + intel_enable_primary_hw_plane(set->crtc->primary, set->crtc);
> > }
> >
> > /*
> > @@ -11024,9 +10995,6 @@ static void intel_shared_dpll_init(struct drm_device *dev)
> > static int
> > intel_primary_plane_disable(struct drm_plane *plane)
> > {
> > - struct drm_device *dev = plane->dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > - struct intel_plane *intel_plane = to_intel_plane(plane);
> > struct intel_crtc *intel_crtc;
> >
> > if (!plane->fb)
> > @@ -11049,8 +11017,7 @@ intel_primary_plane_disable(struct drm_plane *plane)
> > goto disable_unpin;
> >
> > intel_crtc_wait_for_pending_flips(plane->crtc);
> > - intel_disable_primary_hw_plane(dev_priv, intel_plane->plane,
> > - intel_plane->pipe);
> > + intel_disable_primary_hw_plane(plane, plane->crtc);
> >
> > disable_unpin:
> > intel_unpin_fb_obj(to_intel_framebuffer(plane->fb)->obj);
> > @@ -11067,9 +11034,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
> > uint32_t src_w, uint32_t src_h)
> > {
> > struct drm_device *dev = crtc->dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > - struct intel_plane *intel_plane = to_intel_plane(plane);
> > struct drm_rect dest = {
> > /* integer pixels */
> > .x1 = crtc_x,
> > @@ -11143,9 +11108,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
> > }
> >
> > if (intel_crtc->primary_enabled)
> > - intel_disable_primary_hw_plane(dev_priv,
> > - intel_plane->plane,
> > - intel_plane->pipe);
> > + intel_disable_primary_hw_plane(plane, crtc);
> >
> >
> > if (plane->fb != fb)
> > @@ -11160,8 +11123,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
> > return ret;
> >
> > if (!intel_crtc->primary_enabled)
> > - intel_enable_primary_hw_plane(dev_priv, intel_crtc->plane,
> > - intel_crtc->pipe);
> > + intel_enable_primary_hw_plane(plane, crtc);
> >
> > return 0;
> > }
> > --
> > 1.8.5.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Matt Roper
> Graphics Software Engineer
> IoTG Platform Enabling & Development
> Intel Corporation
> (916) 356-2795
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list