<div dir="ltr">Hello, I have an Asus G513 Laptop with HDMI port and USB-C 3.1 DP with video output option, and I need to use two additional monitors to the laptop screen, doing tests at a time when the USB-C got to work. Two Monitors with the adapter that I have there but the laptop screen was deactivated, then the laptop screen was activated but it recognized the DP ports of the USBC but they had no resolution, I have already tried several things and I cannot find the solution.<br><br>I am using Manjaro the output of the xrand is<br><br>xrandr -q<br>xrandr: Output DP-1-0.1 is not disconnected but has no modes<br>xrandr: Output DP-1-0.2 is not disconnected but has no modes<br>Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384<br>eDP connected primary 1920x1080 + 0 + 0 (normal left inverted right x axis y axis) 344mm x 194mm<br>   1920x1080 144.00 + 60.00 *<br>   1680x1050 144.00<br>   1280x1024 144.00<br>   1440x900 144.00<br>   1280x800 144.00<br>   1280x720 144.00<br>   1024x768 144.00<br>   800x600 144.00<br>   640x480 144.00<br>HDMI-A-0 disconnected (normal left inverted right x axis y axis)<br>DP-1-0.1 connected (normal left inverted right x axis y axis)<br>DP-1-0.2 connected (normal left inverted right x axis y axis)<br>DP-1-0 disconnected (normal left inverted right x axis y axis)<br>DP-1-1 disconnected (normal left inverted right x axis y axis)<br><br>In those ports DP-1-0.1 and DP-1-0.2 are the two LG monitors<br><br>I have a nvidia rtx3050 card, the kernel I use is the Currently running: 5.15.7-1-MANJARO (linux515)<br><div><br></div><div><img src="cid:ii_kx9xy8qf0" alt="ced7b2e3aea36edad59711136a9b956ee2cb3b90.png" width="486" height="58"><br></div><div><br></div><div><img src="cid:ii_kx9xyhm01" alt="31e416d2c68e897db560dbe36686cf50c65a1544_2_487x499.png" width="474" height="486"><br></div><div><br></div><div><br></div><div>thanks</div></div>