Problem with DRI3 on Atom N570

[Sergey Andrianov]

Hello,

I'm using OpenBSD 7.0 with Xorg 1.20.13; got a bug:

$ LIBGL_DRI3_DISABLE=1 glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
287 frames in 5.0 seconds = 57.313 FPS
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  155 (DRI2)
  Minor opcode of failed request:  7 (DRI2GetBuffersWithFormat )
  Resource id in failed request:  0x3200002
  Serial number of failed request:  1171
  Current serial number in output stream:  1171

$ glxgears
libGL error: Version 4 or later of flush extension not found
libGL error: failed to load driver: i915
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  155 (DRI2)
  Minor opcode of failed request:  7 (DRI2GetBuffersWithFormat )
  Resource id in failed request:  0x3200002
  Serial number of failed request:  846
  Current serial number in output stream:  846

Looks like this also prevents Chromium from starting hardware acceleration.

dmesg:

OpenBSD 7.0 (GENERIC.MP) #5: Mon Jan 31 09:09:02 MST 2022
    root at syspatch-70-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2119892992 (2021MB)
avail mem = 2039676928 (1945MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdf010 (29 entries)
bios0: vendor Phoenix Technologies Ltd. version
"02FR.M025.20110711.RHU" date 07/11/2011
bios0: SAMSUNG ELECTRONICS CO., LTD. NC215S
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG HPET APIC BOOT SLIC SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCIB(S3) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-16
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 1662.76 MHz, 06-1c-0a
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 197MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 1187.03 MHz, 06-1c-0a
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 512KB 64b/line 8-way L2 cache
cpu1: disabling user TSC (skew=355)
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 1978.38 MHz, 06-1c-0a
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu2: 512KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 1187.03 MHz, 06-1c-0a
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu3: 512KB 64b/line 8-way L2 cache
cpu3: disabling user TSC (skew=335)
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (EXP1)
acpiprt2 at acpi0: bus 7 (EXP2)
acpiprt3 at acpi0: bus 9 (EXP3)
acpiprt4 at acpi0: bus 11 (EXP4)
acpiprt5 at acpi0: bus 17 (PCIB)
acpiec0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpibat0 at acpi0: BAT1 type LION oem "SAMSUNG Electronics"
acpicmos0 at acpi0
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpicpu0 at acpi0: C1(1000 at 1 mwait.1), PSS
acpicpu1 at acpi0: C1(1000 at 1 mwait.1), PSS
acpicpu2 at acpi0: C1(1000 at 1 mwait.1), PSS
acpicpu3 at acpi0: C1(1000 at 1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 98 degC
acpivideo0 at acpi0: IGD0
acpivout0 at acpivideo0: DD04
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
0:29:7: mem address conflict 0xf0504000/0x400
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: apic 4 int 16, PINEVIEW, gen 3
"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 5
iwn0 at pci1 dev 0 function 0 "Intel Centrino Wireless-N 130" rev
0x34: msi, MIMO 1T2R, BGN, address dc:a9:71:6f:73:3b
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi
pci3 at ppb2 bus 9
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E
(0x4080), msi, address e8:11:32:d5:70:70
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi
pci4 at ppb3 bus 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 17
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <KINGSTON SA400S37240G>
wd0: 1-sector PIO, LBA48, 228936MB, 468862128 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.5, 0x1c0b1 0x240000 0x18d440
0xd00033 0xa0400
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
dt: 445 probes
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Image Processor
WebCam SC-0311139N" rev 2.00/0.15 addr 2
video0 at uvideo0
ugen0 at uhub2 port 2 "Intel product 0x0189" rev 2.00/69.19 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (20fda980cc0ee0ac.a) swap on wd0b dump on wd0b
inteldrm0: 1024x600, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

pcidump:

 0:2:0: Intel Pineview Video
0x0000: Vendor ID: 8086, Product ID: a011
0x0004: Command: 0007, Status: 0090
0x0008: Class: 03 Display, Subclass: 00 VGA,
Interface: 00, Revision: 02
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xf0200000/0x00080000
0x0014: BAR io addr: 0x000018d0/0x0008
0x0018: BAR mem prefetchable 32bit addr: 0xd0000000/0x10000000
0x001c: BAR mem 32bit addr: 0xf0000000/0x00100000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 144d Product ID: c0a8
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x00d0: Capability 0x01: Power Management
State: D0
 0:2:1: Intel Pineview Video
0x0000: Vendor ID: 8086, Product ID: a012
0x0004: Command: 0007, Status: 0090
0x0008: Class: 03 Display, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 02
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xf0280000/0x00080000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 144d Product ID: c0a8
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00d0: Capability 0x01: Power Management
State: D0

Xorg.0.log:

[    22.902] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[    22.902] linear framebuffer access unavailable
[    22.997] (--) Using wscons driver on /dev/ttyC4
[    23.038]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[    23.039] Build Operating System: OpenBSD 7.0 amd64
[    23.039] Current Operating System: OpenBSD tel-branora.my.domain
7.0 GENERIC.MP#5 amd64
[    23.040] Build Date: 07 December 2021  12:11:16PM
[    23.040]
[    23.040] Current version of pixman: 0.40.0
[    23.040] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    23.040] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.041] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb  5
00:39:20 2022
[    23.046] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.046] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[    23.051] (==) No Layout section.  Using the first Screen section.
[    23.051] (==) No screen section available. Using defaults.
[    23.051] (**) |-->Screen "Default Screen Section" (0)
[    23.052] (**) |   |-->Monitor "<default monitor>"
[    23.056] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[    23.056] (**) |   |-->Device "Card0"
[    23.056] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    23.056] (==) Automatically adding devices
[    23.056] (==) Automatically enabling devices
[    23.057] (==) Not automatically adding GPU devices
[    23.057] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.065] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[    23.065] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    23.065] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    23.065] (II) Loader magic: 0x7aca66dff00
[    23.065] (II) Module ABI versions:
[    23.066] X.Org ANSI C Emulation: 0.4
[    23.066] X.Org Video Driver: 24.1
[    23.066] X.Org XInput driver : 24.1
[    23.066] X.Org Server Extension : 10.0
[    23.067] (--) PCI:*(0 at 0:2:0) 8086:a011:144d:c0a8 rev 2, Mem @
0xf0200000/524288, 0xd0000000/268435456, 0xf0000000/1048576, I/O @
0x000018d0/8
[    23.067] (--) PCI: (0 at 0:2:1) 8086:a012:144d:c0a8 rev 2, Mem @
0xf0280000/524288
[    23.068] (II) LoadModule: "glx"
[    23.078] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    23.116] (II) Module glx: vendor="X.Org Foundation"
[    23.116] compiled for 1.20.13, module version = 1.0.0
[    23.116] ABI class: X.Org Server Extension, version 10.0
[    23.117] (II) LoadModule: "intel"
[    23.120] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    23.128] (II) Module intel: vendor="X.Org Foundation"
[    23.128] compiled for 1.20.13, module version = 2.99.916
[    23.129] Module class: X.Org Video Driver
[    23.129] ABI class: X.Org Video Driver, version 24.1
[    23.129] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    23.131] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    23.131] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    23.131] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics:
5200, 6200, P6300
[    23.153] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20200917
[    23.159] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[    23.159] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[    23.159] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    23.160] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.160] (==) intel(0): RGB weight 888
[    23.160] (==) intel(0): Default visual is TrueColor
[    23.160] (**) intel(0): Option "DRI" "3"
[    23.160] (**) intel(0): Option "TearFree" "true"
[    23.166] (II) intel(0): Output LVDS1 has no monitor section
[    23.168] (--) intel(0): Found backlight control interface wscons
(type 'platform') for output LVDS1
[    23.168] (II) intel(0): Enabled output LVDS1
[    23.168] (II) intel(0): Output VGA1 has no monitor section
[    23.168] (II) intel(0): Enabled output VGA1
[    23.168] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    23.169] (II) intel(0): Output VIRTUAL1 has no monitor section
[    23.169] (II) intel(0): Enabled output VIRTUAL1
[    23.169] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1
[    23.170] (**) intel(0): TearFree enabled
[    23.170] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    23.170] (==) intel(0): DPI set to (96, 96)
[    23.171] (II) Loading sub module "dri3"
[    23.171] (II) LoadModule: "dri3"
[    23.171] (II) Module "dri3" already built-in
[    23.171] (II) Loading sub module "dri2"
[    23.171] (II) LoadModule: "dri2"
[    23.171] (II) Module "dri2" already built-in
[    23.171] (II) Loading sub module "present"
[    23.171] (II) LoadModule: "present"
[    23.171] (II) Module "present" already built-in
[    23.178] (II) intel(0): SNA initialized with Alviso (gen3) backend
[    23.178] (==) intel(0): Backing store enabled
[    23.178] (==) intel(0): Silken mouse enabled
[    23.180] (II) intel(0): HW Cursor enabled
[    23.187] (==) intel(0): DPMS enabled
[    23.190] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[    23.191] (II) intel(0): [DRI2] Setup complete
[    23.191] (II) intel(0): [DRI2]   DRI driver: i915
[    23.191] (II) intel(0): [DRI2]   VDPAU driver: i915
[    23.191] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    23.192] (II) intel(0): hardware support for Present enabled
[    23.193] (II) Initializing extension Generic Event Extension
[    23.195] (II) Initializing extension SHAPE
[    23.197] (II) Initializing extension MIT-SHM
[    23.199] (II) Initializing extension XInputExtension
[    23.202] (II) Initializing extension XTEST
[    23.203] (II) Initializing extension BIG-REQUESTS
[    23.205] (II) Initializing extension SYNC
[    23.207] (II) Initializing extension XKEYBOARD
[    23.210] (II) Initializing extension XC-MISC
[    23.211] (II) Initializing extension SECURITY
[    23.213] (II) Initializing extension XFIXES
[    23.215] (II) Initializing extension RENDER
[    23.217] (II) Initializing extension RANDR
[    23.221] (II) Initializing extension COMPOSITE
[    23.223] (II) Initializing extension DAMAGE
[    23.225] (II) Initializing extension MIT-SCREEN-SAVER
[    23.226] (II) Initializing extension DOUBLE-BUFFER
[    23.229] (II) Initializing extension RECORD
[    23.230] (II) Initializing extension DPMS
[    23.232] (II) Initializing extension Present
[    23.234] (II) Initializing extension DRI3
[    23.236] (II) Initializing extension X-Resource
[    23.238] (II) Initializing extension XVideo
[    23.239] (II) Initializing extension XVideo-MotionCompensation
[    23.241] (II) Initializing extension GLX
[    23.364] (II) AIGLX: Loaded and initialized i915
[    23.364] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.364] (II) Initializing extension XFree86-VidModeExtension
[    23.367] (II) Initializing extension XFree86-DGA
[    23.370] (II) Initializing extension XFree86-DRI
[    23.371] (II) Initializing extension DRI2
[    23.393] (II) intel(0): switch to mode 1024x600 at 60.0 on LVDS1
using pipe 1, position (0, 0), rotation normal, reflection none
[    23.418] (II) intel(0): Setting screen physical size to 270 x 158
[    23.696] (II) config/wscons: checking input device /dev/wskbd
[    23.696] (II) wskbd: using layout us
[    23.696] (**) /dev/wskbd: Applying InputClass "system-keyboard"
[    23.697] (II) LoadModule: "kbd"
[    23.703] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    23.706] (II) Module kbd: vendor="X.Org Foundation"
[    23.706] compiled for 1.20.13, module version = 1.9.0
[    23.706] Module class: X.Org XInput Driver
[    23.706] ABI class: X.Org XInput driver, version 24.1
[    23.706] (II) Using input driver 'kbd' for '/dev/wskbd'
[    23.706] (**) /dev/wskbd: always reports core events
[    23.706] (**) /dev/wskbd: always reports core events
[    23.707] (**) Option "Protocol" "standard"
[    23.707] (**) Option "XkbRules" "base"
[    23.707] (**) Option "XkbModel" "pc104"
[    23.707] (**) Option "XkbLayout" "us,ru"
[    23.707] (**) Option "XkbVariant" "qwerty"
[    23.707] (**) Option "XkbOptions" "grp:caps_toggle"
[    23.708] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[    24.475] (II) config/wscons: checking input device /dev/wsmouse0
[    24.475] (II) LoadModule: "ws"
[    24.483] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    24.485] (II) Module ws: vendor="X.Org Foundation"
[    24.485] compiled for 1.20.13, module version = 1.3.0
[    24.485] Module class: X.Org XInput Driver
[    24.485] ABI class: X.Org XInput driver, version 24.1
[    24.485] (II) Using input driver 'ws' for '/dev/wsmouse0'
[    24.486] (**) /dev/wsmouse0: always reports core events
[    24.486] (II) ws: /dev/wsmouse0: debuglevel 0
[    24.486] (**) Option "Device" "/dev/wsmouse0"
[    24.486] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[    24.486] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[    24.486] (**) ws: /dev/wsmouse0: associated screen: 0
[    25.005] (II) ws: /dev/wsmouse0: minimum x position: 0
[    25.005] (II) ws: /dev/wsmouse0: maximum x position: 1023
[    25.005] (II) ws: /dev/wsmouse0: minimum y position: 0
[    25.005] (II) ws: /dev/wsmouse0: maximum y position: 599
[    25.005] (==) ws: /dev/wsmouse0: Buttons: 7
[    25.060] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[    25.061] (II) XINPUT: Adding extended input device "/dev/wsmouse0"
(type: MOUSE, id 7)
[    25.589] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[    25.589] (**) /dev/wsmouse0: (accel) acceleration profile 0
[    25.590] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[    25.590] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[    25.592] (II) config/wscons: checking input device /dev/wsmouse
[    25.592] (II) Using input driver 'ws' for '/dev/wsmouse'
[    25.592] (**) /dev/wsmouse: always reports core events
[    25.592] (II) ws: /dev/wsmouse: debuglevel 0
[    25.592] (**) Option "Device" "/dev/wsmouse"
[    25.592] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    25.592] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    25.592] (**) ws: /dev/wsmouse: associated screen: 0
[    25.593] (II) ws: /dev/wsmouse: minimum x position: 0
[    25.593] (II) ws: /dev/wsmouse: maximum x position: 1023
[    25.593] (II) ws: /dev/wsmouse: minimum y position: 0
[    25.593] (II) ws: /dev/wsmouse: maximum y position: 599
[    25.593] (==) ws: /dev/wsmouse: Buttons: 7
[    25.593] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    25.593] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 8)
[    25.594] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    25.594] (**) /dev/wsmouse: (accel) acceleration profile 0
[    25.594] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    25.594] (**) /dev/wsmouse: (accel) acceleration threshold: 4

chromium log with LIBGL debug env var:

[42175:132497984:0205/070615.266618:ERROR:bus.cc(392)] Failed to
connect to the bus: /usr/local/bin/dbus-launch terminated abnormally
without any error message
[42175:132497984:0205/070615.290211:ERROR:bus.cc(392)] Failed to
connect to the bus: /usr/local/bin/dbus-launch terminated abnormally
without any error message
[42175:132497984:0205/070615.814374:ERROR:bus.cc(392)] Failed to
connect to the bus: /usr/local/bin/dbus-launch terminated abnormally
without any error message
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
libGL: using driver i915 for 12
_priv_open_device
_priv_open_device
libGL: pci id for fd 12: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL error: Version 4 or later of flush extension not found
libGL error: failed to load driver: i915
[42175:132497984:0205/070617.736116:ERROR:bus.cc(392)] Failed to
connect to the bus: /usr/local/bin/dbus-launch terminated abnormally
without any error message
[42175:132497984:0205/070617.827900:ERROR:bus.cc(392)] Failed to
connect to the bus: /usr/local/bin/dbus-launch terminated abnormally
without any error message
libGL: using driver i915 for 12
[42175:132497984:0205/070617.891928:ERROR:bus.cc(392)] Failed to
connect to the bus: /usr/local/bin/dbus-launch terminated abnormally
without any error message
_priv_open_device
_priv_open_device
libGL: pci id for fd 12: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL: Using DRI2 for screen 0
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
libGL: using driver i915 for 15
_priv_open_device
_priv_open_device
libGL: pci id for fd 15: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL error: Version 4 or later of flush extension not found
libGL error: failed to load driver: i915
libGL: using driver i915 for 15
_priv_open_device
_priv_open_device
libGL: pci id for fd 15: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL: Using DRI2 for screen 0
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
libGL: using driver i915 for 17
_priv_open_device
_priv_open_device
libGL: pci id for fd 17: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL error: Version 4 or later of flush extension not found
libGL error: failed to load driver: i915
libGL: using driver i915 for 17
_priv_open_device
_priv_open_device
libGL: pci id for fd 17: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL: Using DRI2 for screen 0
[58331:-716467840:0205/070618.588663:ERROR:angle_platform_impl.cc(44)]
renderergl_utils.cpp:496 (GenerateTextureFormatCaps):
glGetInternalformativ generated error 0x00000500 for format
0x0000906F. Skipping multisample checks.
[58331:-716467840:0205/070618.590389:ERROR:angle_platform_impl.cc(44)]
Display.cpp:878 (initialize): ANGLE Display::initialize error 12289:
OpenGL ES 2.0 is not supportable.
[58331:-716467840:0205/070618.590954:ERROR:gl_surface_egl.cc(780)] EGL
Driver message (Critical) eglInitialize: OpenGL ES 2.0 is not
supportable.
[58331:-716467840:0205/070618.591215:ERROR:gl_surface_egl.cc(1375)]
eglInitialize OpenGL failed with error EGL_NOT_INITIALIZED, trying
next display type
[58331:-716467840:0205/070618.691237:ERROR:angle_platform_impl.cc(44)]
Display.cpp:878 (initialize): ANGLE Display::initialize error 12289:
Intel or NVIDIA OpenGL ES drivers are not supported.
[58331:-716467840:0205/070618.691780:ERROR:gl_surface_egl.cc(780)] EGL
Driver message (Critical) eglInitialize: Intel or NVIDIA OpenGL ES
drivers are not supported.
[58331:-716467840:0205/070618.692069:ERROR:gl_surface_egl.cc(1375)]
eglInitialize OpenGLES failed with error EGL_NOT_INITIALIZED
[58331:-716467840:0205/070618.692310:ERROR:gl_initializer_linux_x11.cc(179)]
GLSurfaceEGL::InitializeOneOff failed.
[58331:-716467840:0205/070618.773010:ERROR:viz_main_impl.cc(162)]
Exiting GPU process due to errors during initializatio
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
_priv_open_device
libGL: using driver i915 for 12
_priv_open_device
_priv_open_device
libGL: pci id for fd 12: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL error: Version 4 or later of flush extension not found
libGL error: failed to load driver: i915
libGL: using driver i915 for 12
_priv_open_device
_priv_open_device
libGL: pci id for fd 12: 8086:a011, driver i915
libGL: MESA-LOADER: dlopen(/usr/X11R6/lib/modules/dri/i915_dri.so)
libGL: Using DRI2 for screen 0
[66884:841261440:0205/070620.323936:ERROR:angle_platform_impl.cc(44)]
RendererVk.cpp:122 (VerifyExtensionsPresent): Extension not supported:
VK_KHR_surface
[66884:841261440:0205/070620.324746:ERROR:angle_platform_impl.cc(44)]
RendererVk.cpp:122 (VerifyExtensionsPresent): Extension not supported:
VK_KHR_xcb_surface
[66884:841261440:0205/070620.325384:ERROR:angle_platform_impl.cc(44)]
Display.cpp:878 (initialize): ANGLE Display::initialize error 0:
Internal Vulkan error (-7): A requested extension is not supported, in
../../third_party/angle/src/libANGLE/renderer/vulkan/RendererVk.cpp,
initialize:986.
[66884:841261440:0205/070620.326109:ERROR:gl_surface_egl.cc(780)] EGL
Driver message (Critical) eglInitialize: Internal Vulkan error (-7): A
requested extension is not supported, in
../../third_party/angle/src/libANGLE/renderer/vulkan/RendererVk.cpp,
initialize:986.
[66884:841261440:0205/070620.326505:ERROR:gl_surface_egl.cc(1375)]
eglInitialize SwANGLE failed with error EGL_NOT_INITIALIZED
[66884:841261440:0205/070620.326958:ERROR:gl_initializer_linux_x11.cc(179)]
GLSurfaceEGL::InitializeOneOff failed.
[66884:841261440:0205/070620.357495:ERROR:viz_main_impl.cc(162)]
Exiting GPU process due to errors during initialization
[79111:1343926656:0205/070621.415955:ERROR:gpu_init.cc(441)]
Passthrough is not supported, GL is disabled
[42175:132498496:0205/070621.887811:ERROR:bus.cc(392)] Failed to
connect to the bus: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
[42175:132498496:0205/070621.891965:ERROR:bus.cc(392)] Failed to
connect to the bus: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
[42175:132498496:0205/070621.893106:ERROR:bus.cc(392)] Failed to
connect to the bus: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
[42175:132498496:0205/070621.893996:ERROR:bus.cc(392)] Failed to
connect to the bus: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
[42175:132498496:0205/070621.898436:ERROR:bus.cc(392)] Failed to
connect to the bus: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
[42175:132497472:0205/070622.553455:ERROR:gpu_process_host.cc(962)]
GPU process exited unexpectedly: exit_code=11
[60917:912105856:0205/070624.007510:ERROR:gpu_init.cc(441)]
Passthrough is not supported, GL is disabled