Screen(s) found, but none have a usable configuration.
Earl Killian
xorg at earl.killian.com
Sun Feb 3 17:10:56 UTC 2019
I have an old 1U server with VGA output. The graphics card is an ATI
Mach64. The monitor connected to the VGA is a Dell 2001FP, which is
1600x1200 native, but should be operated at a lower resolution on this
server because of limited VGA bandwidth.
I recently upgraded the Linux distro to openSUSE Leap 15.0, and now no
matter what I try, I get "Screen(s) found, but none have a usable
configuration." no matter what I try. I would appreciate any suggestions
that would help me get this working. My first attempt with the distro
files in /etc/X11/xorg.conf.d, which are essentially empty, letting Xorg
default everything. I have since attempted adding Monitor, Section, and
Device sections to give me 1024x768 at 60Hz, but nothing gets rid of the
none usable error.
I am relatively naive when it comes to Xorg configuration, and so I
could easily be missing something obvious. I would therefore appreciate
someone looking over the following log output and suggest what the
problem might be.
Since this a 1U server that will usually be booted headless, I would
like a configuration that will work with whatever monitor happens to be
on the "crash cart" in the colocation facility. That's why my target is
1024x768 at 60Hz, since that is pretty much universal. But right now I
cannot get it to work with the monitor on my bench, no matter what I
try. For example, I have tried putting the ModeLines from the log file
into my 50-monitor.conf file, to no avail. I have also tried the vesa
driver instead of the mach64 driver, also to no avail. Always no usable
screens.
Suggestions or pointers much appreciated!
[ 60041.843]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 60041.843] X Protocol Version 11, Revision 0
[ 60041.843] Build Operating System: openSUSE SUSE LINUX
[ 60041.843] Current Operating System: Linux spruce-eth1 4.12.14-lp150.12.45-default #1 SMP Mon Jan 14 20:29:59 UTC 2019 (7a62739) x86_64
[ 60041.843] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.14-lp150.12.45-default root=UUID=b8f3f2a9-4364-48e5-9a25-8d4053919a70 video=1024x768 resume=/dev/disk/by-id/ata-ST3500630NS_9QG43S41-part3 splash=silent quiet showopts
[ 60041.844] Build Date: 14 November 2018 12:00:00PM
[ 60041.844]
[ 60041.844] Current version of pixman: 0.34.0
[ 60041.844] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 60041.844] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 60041.845] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 3 08:45:38 2019
[ 60041.845] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 60041.846] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 60041.846] (==) ServerLayout "Default Layout"
[ 60041.846] (**) |-->Screen "Default Screen" (0)
[ 60041.846] (**) | |-->Monitor "Default Monitor"
[ 60041.847] (**) | |-->Device "Mach64"
[ 60041.847] (==) Automatically adding devices
[ 60041.847] (==) Automatically enabling devices
[ 60041.847] (==) Automatically adding GPU devices
[ 60041.847] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 60041.847] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 60041.847] Entry deleted from font path.
[ 60041.847] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 60041.847] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 60041.847] (**) Extension "XFree86-DGA" is disabled
[ 60041.847] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 60041.847] (II) Loader magic: 0x56415caa9d00
[ 60041.847] (II) Module ABI versions:
[ 60041.847] X.Org ANSI C Emulation: 0.4
[ 60041.847] X.Org Video Driver: 23.0
[ 60041.847] X.Org XInput driver : 24.1
[ 60041.847] X.Org Server Extension : 10.0
[ 60041.849] (--) using VT number 2
[ 60041.849] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 60041.852] (--) PCI:*(0:1:7:0) 1002:4752:1002:8008 rev 39, Mem @ 0xde000000/16777216, 0xdd100000/4096, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 60041.852] (II) LoadModule: "glx"
[ 60041.853] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 60041.854] (II) Module glx: vendor="X.Org Foundation"
[ 60041.854] compiled for 1.19.6, module version = 1.0.0
[ 60041.854] ABI class: X.Org Server Extension, version 10.0
[ 60041.854] (II) LoadModule: "mach64"
[ 60041.855] (II) Loading /usr/lib64/xorg/modules/drivers/mach64_drv.so
[ 60041.855] (II) Module mach64: vendor="X.Org Foundation"
[ 60041.855] compiled for 1.19.6, module version = 6.9.5
[ 60041.855] Module class: X.Org Video Driver
[ 60041.855] ABI class: X.Org Video Driver, version 23.0
[ 60041.855] (II) MACH64: Driver for ATI Mach64 chipsets
[ 60041.944] (**) MACH64(0): Depth 24, (**) framebuffer bpp 32
[ 60041.944] (==) MACH64(0): Using XAA acceleration architecture
[ 60041.944] (II) MACH64: Mach64 in slot 1:7:0 detected.
[ 60041.944] (II) Loading sub module "vbe"
[ 60041.944] (II) LoadModule: "vbe"
[ 60041.944] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 60041.944] (II) Module vbe: vendor="X.Org Foundation"
[ 60041.944] compiled for 1.19.6, module version = 1.1.0
[ 60041.944] ABI class: X.Org Video Driver, version 23.0
[ 60041.945] (II) Loading sub module "int10"
[ 60041.945] (II) LoadModule: "int10"
[ 60041.945] (II) Loading /usr/lib64/xorg/modules/libint10.so
[ 60041.945] (II) Module int10: vendor="X.Org Foundation"
[ 60041.945] compiled for 1.19.6, module version = 1.0.0
[ 60041.945] ABI class: X.Org Video Driver, version 23.0
[ 60041.945] (II) MACH64(0): initializing int10
[ 60041.946] (II) MACH64(0): Primary V_BIOS segment is: 0xc000
[ 60041.946] (II) MACH64(0): VESA BIOS detected
[ 60041.946] (II) MACH64(0): VESA VBE Version 2.0
[ 60041.946] (II) MACH64(0): VESA VBE Total Mem: 8128 kB
[ 60041.946] (II) MACH64(0): VESA VBE OEM: ATI MACH64
[ 60041.946] (II) MACH64(0): VESA VBE OEM Software Rev: 1.0
[ 60041.946] (II) MACH64(0): VESA VBE OEM Vendor: ATI Technologies Inc.
[ 60041.946] (II) MACH64(0): VESA VBE OEM Product: MACH64GM
[ 60041.946] (II) MACH64(0): VESA VBE OEM Product Rev: 01.00
[ 60041.946] (II) MACH64(0): VESA VBE DDC supported
[ 60041.946] (II) MACH64(0): VESA VBE DDC Level 2
[ 60041.946] (II) MACH64(0): VESA VBE DDC transfer in appr. 2 sec.
[ 60041.970] (II) MACH64(0): VESA VBE DDC read successfully
[ 60041.971] (II) UnloadSubModule: "vbe"
[ 60041.971] (II) Unloading vbe
[ 60041.971] (II) MACH64(0): Manufacturer: DEL Model: a007 Serial#: 808668236
[ 60041.971] (II) MACH64(0): Year: 2004 Week: 42
[ 60041.971] (II) MACH64(0): EDID Version: 1.3
[ 60041.971] (II) MACH64(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 60041.971] (II) MACH64(0): Sync: Separate Composite SyncOnGreen
[ 60041.971] (II) MACH64(0): Max Image Size [cm]: horiz.: 41 vert.: 31
[ 60041.971] (II) MACH64(0): Gamma: 2.20
[ 60041.971] (II) MACH64(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 60041.971] (II) MACH64(0): Default color space is primary color space
[ 60041.971] (II) MACH64(0): First detailed timing is preferred mode
[ 60041.971] (II) MACH64(0): redX: 0.638 redY: 0.342 greenX: 0.293 greenY: 0.608
[ 60041.971] (II) MACH64(0): blueX: 0.146 blueY: 0.067 whiteX: 0.312 whiteY: 0.328
[ 60041.971] (II) MACH64(0): Supported established timings:
[ 60041.971] (II) MACH64(0): 720x400 at 70Hz
[ 60041.971] (II) MACH64(0): 640x480 at 60Hz
[ 60041.971] (II) MACH64(0): 640x480 at 75Hz
[ 60041.971] (II) MACH64(0): 800x600 at 60Hz
[ 60041.971] (II) MACH64(0): 800x600 at 75Hz
[ 60041.971] (II) MACH64(0): 1024x768 at 60Hz
[ 60041.971] (II) MACH64(0): 1024x768 at 75Hz
[ 60041.971] (II) MACH64(0): 1280x1024 at 75Hz
[ 60041.971] (II) MACH64(0): Manufacturer's mask: 0
[ 60041.971] (II) MACH64(0): Supported standard timings:
[ 60041.971] (II) MACH64(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 60041.971] (II) MACH64(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 60041.971] (II) MACH64(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 60041.971] (II) MACH64(0): Supported detailed timing:
[ 60041.971] (II) MACH64(0): clock: 162.0 MHz Image Size: 367 x 275 mm
[ 60041.971] (II) MACH64(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
[ 60041.971] (II) MACH64(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
[ 60041.971] (II) MACH64(0): Serial No: C06464AC03LL
[ 60041.971] (II) MACH64(0): Monitor name: DELL 2001FP
[ 60041.971] (II) MACH64(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 165 MHz
[ 60041.971] (II) MACH64(0): EDID (in hex):
[ 60041.971] (II) MACH64(0): 00ffffffffffff0010ac07a04c4c3330
[ 60041.971] (II) MACH64(0): 2a0e01030e291f78ee6390a3574b9b25
[ 60041.971] (II) MACH64(0): 115054a54b008180a940714f01010101
[ 60041.971] (II) MACH64(0): 010101010101483f403062b0324040c0
[ 60041.971] (II) MACH64(0): 13006f131100001e000000ff00433036
[ 60041.972] (II) MACH64(0): 343634414330334c4c20000000fc0044
[ 60041.972] (II) MACH64(0): 454c4c203230303146500a20000000fd
[ 60041.972] (II) MACH64(0): 00384c1f5010000a20202020202000b1
[ 60041.972] (II) MACH64(0): EDID vendor "DEL", prod id 40967
[ 60041.972] (II) MACH64(0): Using hsync ranges from config file
[ 60041.972] (II) MACH64(0): Using vrefresh ranges from config file
[ 60041.972] (II) MACH64(0): Printing DDC gathered Modelines:
[ 60041.972] (II) MACH64(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP)
[ 60041.972] (II) MACH64(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 60041.972] (II) MACH64(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 60041.972] (II) MACH64(0): BIOS Data: BIOSSize=0x8000, ROMTable=0x0114.
[ 60041.972] (II) MACH64(0): BIOS Data: ClockTable=0x097C, FrequencyTable=0x0000.
[ 60041.972] (II) MACH64(0): BIOS Data: LCDTable=0x0000.
[ 60041.972] (II) MACH64(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x015E.
[ 60041.972] (II) MACH64(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F.
[ 60041.972] (--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected.
[ 60041.972] (--) MACH64(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision 0x00.
[ 60041.972] (--) MACH64(0): PCI bus interface detected; block I/O base is 0x2000.
[ 60041.972] (--) MACH64(0): ATI Mach64 adapter detected.
[ 60041.972] (!!) MACH64(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
[ 60041.972] (--) MACH64(0): Internal RAMDAC (subtype 1) detected.
[ 60041.972] (==) MACH64(0): RGB weight 888
[ 60041.972] (==) MACH64(0): Default visual is TrueColor
[ 60041.972] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
[ 60041.972] (II) MACH64(0): Using Mach64 accelerator CRTC.
[ 60041.972] (II) MACH64(0): Storing hardware cursor image at 0xDE7FFC00.
[ 60041.972] (II) MACH64(0): Using 8 MB linear aperture at 0xDE000000.
[ 60041.972] (!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
[ 60041.972] (II) MACH64(0): Using Block 0 MMIO aperture at 0xDD100400.
[ 60041.972] (II) MACH64(0): Using Block 1 MMIO aperture at 0xDD100000.
[ 60041.973] (EE) MACH64(0): Unable to map linear aperture. Invalid argument (22)
[ 60041.973] (II) UnloadModule: "mach64"
[ 60041.973] (II) UnloadSubModule: "int10"
[ 60041.973] (II) Unloading int10
[ 60041.973] (EE) Screen(s) found, but none have a usable configuration.
[ 60041.973] (EE)
Fatal server error:
[ 60041.973] (EE) no screens found(EE)
[ 60041.974] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 60041.974] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.x.org/archives/xorg/attachments/20190203/637528e7/attachment-0001.html>
More information about the xorg
mailing list