intel atom D525MW w/i915 onboard gfx vs 16x9 monitor
Gene Heskett
gheskett at wdtv.com
Sat Jul 18 03:39:02 PDT 2015
On Saturday 18 July 2015 02:33:22 Thomas Lübking wrote:
> On Samstag, 18. Juli 2015 07:51:41 CEST, Gene Heskett wrote:
> > The default seems to be 1280x768. There is a 13nnx800 mode but the
> > images are bigger than the screen and circles are still smunched
> > vertically. 17" AOC monitor on the machine doing the squashing.
>
> What are complete output of "xrandr -q", contents of
> /var/log/Xorg.0.log and the exact monitor model?
>
> Usually the system asks monitor and IGP for supported modes and
> presents you the intersection - 1280x768 is 16:9.6, but if the
> monitors physical pixels aren't square, this can end up as 16:9
>
> Cheers,
> Thomas
Board is Intel Atom D525MW
gene at shop:~$ xrandr -q
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
HDMI-1 disconnected (normal left inverted right x axis y axis)
VGA-1 disconnected (normal left inverted right x axis y axis)
Log:(word wrap off)
gene at shop:/var/log$ cat Xorg.0.log
[ 27.246]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 27.246] X Protocol Version 11, Revision 0
[ 27.246] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 27.246] Current Operating System: Linux shop 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc i686
[ 27.246] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4-9-rtai-686-pae root=UUID=ef74047c-6f7e-4e27-93f3-917d36ca8b2c ro
initrd=/install/gtk/initrd.gz lapic isolcpus=1 rootdelay=5
[ 27.246] Build Date: 09 February 2015 10:12:47AM
[ 27.246] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau at debian.org>)
[ 27.247] Current version of pixman: 0.26.0
[ 27.247] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.247] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.247] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 28 14:27:22 2015
[ 27.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.318] (==) No Layout section. Using the first Screen section.
[ 27.318] (==) No screen section available. Using defaults.
[ 27.318] (**) |-->Screen "Default Screen Section" (0)
[ 27.318] (**) | |-->Monitor "<default monitor>"
[ 27.319] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.319] (==) Automatically adding devices
[ 27.319] (==) Automatically enabling devices
[ 27.354] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.354] Entry deleted from font path.
[ 27.358] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 27.358] Entry deleted from font path.
[ 27.358] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 27.358] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.358] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.358] (II) Loader magic: 0xb77ea5a0
[ 27.358] (II) Module ABI versions:
[ 27.358] X.Org ANSI C Emulation: 0.4
[ 27.358] X.Org Video Driver: 12.1
[ 27.358] X.Org XInput driver : 16.0
[ 27.358] X.Org Server Extension : 6.0
[ 27.360] (--) PCI:*(0:0:2:0) 8086:a001:8086:574d rev 2, Mem @ 0xf0300000/524288, 0xe0000000/268435456, 0xf0200000/1048576, I/O
@ 0x000020c0/8
[ 27.360] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.360] (II) LoadModule: "extmod"
[ 27.363] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 27.377] (II) Module extmod: vendor="X.Org Foundation"
[ 27.377] compiled for 1.12.4, module version = 1.0.0
[ 27.377] Module class: X.Org Server Extension
[ 27.377] ABI class: X.Org Server Extension, version 6.0
[ 27.378] (II) Loading extension SELinux
[ 27.378] (II) Loading extension MIT-SCREEN-SAVER
[ 27.378] (II) Loading extension XFree86-VidModeExtension
[ 27.378] (II) Loading extension XFree86-DGA
[ 27.378] (II) Loading extension DPMS
[ 27.378] (II) Loading extension XVideo
[ 27.378] (II) Loading extension XVideo-MotionCompensation
[ 27.378] (II) Loading extension X-Resource
[ 27.378] (II) LoadModule: "dbe"
[ 27.378] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 27.389] (II) Module dbe: vendor="X.Org Foundation"
[ 27.389] compiled for 1.12.4, module version = 1.0.0
[ 27.389] Module class: X.Org Server Extension
[ 27.389] ABI class: X.Org Server Extension, version 6.0
[ 27.389] (II) Loading extension DOUBLE-BUFFER
[ 27.389] (II) LoadModule: "glx"
[ 27.390] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.409] (II) Module glx: vendor="X.Org Foundation"
[ 27.409] compiled for 1.12.4, module version = 1.0.0
[ 27.409] ABI class: X.Org Server Extension, version 6.0
[ 27.409] (==) AIGLX enabled
[ 27.409] (II) Loading extension GLX
[ 27.409] (II) LoadModule: "record"
[ 27.410] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 27.551] (II) Module record: vendor="X.Org Foundation"
[ 27.551] compiled for 1.12.4, module version = 1.13.0
[ 27.551] Module class: X.Org Server Extension
[ 27.551] ABI class: X.Org Server Extension, version 6.0
[ 27.551] (II) Loading extension RECORD
[ 27.551] (II) LoadModule: "dri"
[ 27.552] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.620] (II) Module dri: vendor="X.Org Foundation"
[ 27.620] compiled for 1.12.4, module version = 1.0.0
[ 27.620] ABI class: X.Org Server Extension, version 6.0
[ 27.620] (II) Loading extension XFree86-DRI
[ 27.620] (II) LoadModule: "dri2"
[ 27.621] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.639] (II) Module dri2: vendor="X.Org Foundation"
[ 27.639] compiled for 1.12.4, module version = 1.2.0
[ 27.639] ABI class: X.Org Server Extension, version 6.0
[ 27.639] (II) Loading extension DRI2
[ 27.639] (==) Matched intel as autoconfigured driver 0
[ 27.639] (==) Matched vesa as autoconfigured driver 1
[ 27.639] (==) Matched fbdev as autoconfigured driver 2
[ 27.639] (==) Assigned the driver to the xf86ConfigLayout
[ 27.639] (II) LoadModule: "intel"
[ 27.640] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 27.670] (II) Module intel: vendor="X.Org Foundation"
[ 27.670] compiled for 1.12.3.902, module version = 2.19.0
[ 27.670] Module class: X.Org Video Driver
[ 27.670] ABI class: X.Org Video Driver, version 12.1
[ 27.670] (II) LoadModule: "vesa"
[ 27.670] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 27.677] (II) Module vesa: vendor="X.Org Foundation"
[ 27.677] compiled for 1.12.1, module version = 2.3.1
[ 27.677] Module class: X.Org Video Driver
[ 27.678] ABI class: X.Org Video Driver, version 12.0
[ 27.678] (II) LoadModule: "fbdev"
[ 27.678] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 27.699] (II) Module fbdev: vendor="X.Org Foundation"
[ 27.699] compiled for 1.12.1, module version = 0.4.2
[ 27.699] ABI class: X.Org Video Driver, version 12.0
[ 27.699] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 27.700] (II) VESA: driver for VESA chipsets: vesa
[ 27.700] (II) FBDEV: driver for framebuffer: fbdev
[ 27.700] (++) using VT number 7
[ 27.704] (WW) Falling back to old probe method for vesa
[ 27.704] (WW) Falling back to old probe method for fbdev
[ 27.704] (II) Loading sub module "fbdevhw"
[ 27.704] (II) LoadModule: "fbdevhw"
[ 27.705] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 27.706] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 27.706] compiled for 1.12.4, module version = 0.0.2
[ 27.706] ABI class: X.Org Video Driver, version 12.1
[ 27.707] drmOpenDevice: node name is /dev/dri/card0
[ 27.707] drmOpenDevice: open result is 9, (OK)
[ 27.707] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 27.707] drmOpenDevice: node name is /dev/dri/card0
[ 27.707] drmOpenDevice: open result is 9, (OK)
[ 27.707] drmOpenByBusid: drmOpenMinor returns 9
[ 27.707] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 27.707] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.707] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 27.707] (==) intel(0): RGB weight 888
[ 27.707] (==) intel(0): Default visual is TrueColor
[ 27.707] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
[ 27.707] (--) intel(0): Chipset: "Pineview G"
[ 27.707] (**) intel(0): Relaxed fencing enabled
[ 27.707] (**) intel(0): Wait on SwapBuffers? enabled
[ 27.707] (**) intel(0): Triple buffering? enabled
[ 27.707] (**) intel(0): Framebuffer tiled
[ 27.708] (**) intel(0): Pixmaps tiled
[ 27.708] (**) intel(0): 3D buffers tiled
[ 27.708] (**) intel(0): SwapBuffers wait enabled
[ 27.708] (==) intel(0): video overlay key set to 0x101fe
[ 27.709] (II) intel(0): Output LVDS1 has no monitor section
[ 27.709] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[ 27.752] (II) intel(0): Output VGA1 has no monitor section
[ 27.752] (II) intel(0): EDID for output LVDS1
[ 27.753] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 27.753] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 27.753] (II) intel(0): Printing probed modes for output LVDS1
[ 27.753] (II) intel(0): Modeline "1280x800"x58.1 68.90 1280 1292 1340 1440 800 804 807 823 -hsync -vsync (47.8 kHz P)
[ 27.753] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 27.753] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 27.753] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 27.753] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 27.787] (II) intel(0): EDID for output VGA1
[ 27.788] (II) intel(0): Manufacturer: AOC Model: 1831 Serial#: 51265
[ 27.788] (II) intel(0): Year: 2010 Week: 26
[ 27.788] (II) intel(0): EDID Version: 1.3
[ 27.788] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 27.788] (II) intel(0): Sync: Separate
[ 27.788] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 27.788] (II) intel(0): Gamma: 2.20
[ 27.788] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 27.788] (II) intel(0): First detailed timing is preferred mode
[ 27.788] (II) intel(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[ 27.788] (II) intel(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329
[ 27.788] (II) intel(0): Supported established timings:
[ 27.788] (II) intel(0): 720x400 at 70Hz
[ 27.788] (II) intel(0): 640x480 at 60Hz
[ 27.788] (II) intel(0): 640x480 at 67Hz
[ 27.788] (II) intel(0): 640x480 at 72Hz
[ 27.788] (II) intel(0): 640x480 at 75Hz
[ 27.788] (II) intel(0): 800x600 at 56Hz
[ 27.788] (II) intel(0): 800x600 at 60Hz
[ 27.789] (II) intel(0): 800x600 at 72Hz
[ 27.789] (II) intel(0): 800x600 at 75Hz
[ 27.789] (II) intel(0): 832x624 at 75Hz
[ 27.789] (II) intel(0): 1024x768 at 60Hz
[ 27.789] (II) intel(0): 1024x768 at 70Hz
[ 27.789] (II) intel(0): 1024x768 at 75Hz
[ 27.789] (II) intel(0): Manufacturer's mask: 0
[ 27.789] (II) intel(0): Supported standard timings:
[ 27.789] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 27.789] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
[ 27.789] (II) intel(0): Supported detailed timing:
[ 27.789] (II) intel(0): clock: 85.5 MHz Image Size: 413 x 234 mm
[ 27.789] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 27.789] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 27.789] (II) intel(0): Supported detailed timing:
[ 27.789] (II) intel(0): clock: 85.5 MHz Image Size: 34 x 19 mm
[ 27.789] (II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 27.789] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 27.789] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 95 MHz
[ 27.789] (II) intel(0): Monitor name: 831W
[ 27.789] (II) intel(0): EDID (in hex):
[ 27.789] (II) intel(0): 00ffffffffffff0005e3311841c80000
[ 27.789] (II) intel(0): 1a140103682917782aeed1a555489b26
[ 27.789] (II) intel(0): 125054bfee00310a614c010101010101
[ 27.789] (II) intel(0): 010101010101662156aa51001e30468f
[ 27.789] (II) intel(0): 33009dea1000001e662150b051001b30
[ 27.790] (II) intel(0): 4070360022130000001e000000fd0037
[ 27.790] (II) intel(0): 4b1e5109000a202020202020000000fc
[ 27.790] (II) intel(0): 00383331570a2020202020202020003e
[ 27.790] (II) intel(0): Printing probed modes for output VGA1
[ 27.790] (II) intel(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 27.790] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 27.790] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 27.790] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
[ 27.790] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 27.790] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 27.790] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 27.790] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 27.790] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 27.790] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 27.790] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 27.790] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 27.790] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 27.790] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 27.790] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 27.790] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 27.790] (II) intel(0): Output LVDS1 connected
[ 27.790] (II) intel(0): Output VGA1 connected
[ 27.791] (II) intel(0): Using fuzzy aspect match for initial modes
[ 27.791] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 27.791] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 27.791] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 27.791] (II) intel(0): Kernel page flipping support detected, enabling
[ 27.791] (==) intel(0): DPI set to (96, 96)
[ 27.791] (II) Loading sub module "fb"
[ 27.791] (II) LoadModule: "fb"
[ 27.791] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.808] (II) Module fb: vendor="X.Org Foundation"
[ 27.808] compiled for 1.12.4, module version = 1.0.0
[ 27.808] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.808] (II) Loading sub module "dri2"
[ 27.808] (II) LoadModule: "dri2"
[ 27.809] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.809] (II) Module dri2: vendor="X.Org Foundation"
[ 27.809] compiled for 1.12.4, module version = 1.2.0
[ 27.809] ABI class: X.Org Server Extension, version 6.0
[ 27.809] (II) UnloadModule: "vesa"
[ 27.809] (II) Unloading vesa
[ 27.809] (II) UnloadModule: "fbdev"
[ 27.809] (II) Unloading fbdev
[ 27.809] (II) UnloadSubModule: "fbdevhw"
[ 27.809] (II) Unloading fbdevhw
[ 27.809] (==) Depth 24 pixmap format is 32 bpp
[ 27.810] (II) intel(0): [DRI2] Setup complete
[ 27.810] (II) intel(0): [DRI2] DRI driver: i915
[ 27.810] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 27.820] (II) UXA(0): Driver registered support for the following operations:
[ 27.820] (II) solid
[ 27.820] (II) copy
[ 27.820] (II) composite (RENDER acceleration)
[ 27.820] (II) put_image
[ 27.820] (II) get_image
[ 27.820] (==) intel(0): Backing store disabled
[ 27.820] (==) intel(0): Silken mouse enabled
[ 27.820] (II) intel(0): Initializing HW Cursor
[ 27.820] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 27.823] (==) intel(0): DPMS enabled
[ 27.823] (==) intel(0): Intel XvMC decoder disabled
[ 27.823] (II) intel(0): Set up textured video
[ 27.823] (II) intel(0): Set up overlay video
[ 27.823] (II) intel(0): direct rendering: DRI2 Enabled
[ 27.823] (==) intel(0): hotplug detection: "enabled"
[ 28.280] (--) RandR disabled
[ 28.280] (II) Initializing built-in extension Generic Event Extension
[ 28.280] (II) Initializing built-in extension SHAPE
[ 28.280] (II) Initializing built-in extension MIT-SHM
[ 28.280] (II) Initializing built-in extension XInputExtension
[ 28.280] (II) Initializing built-in extension XTEST
[ 28.280] (II) Initializing built-in extension BIG-REQUESTS
[ 28.280] (II) Initializing built-in extension SYNC
[ 28.280] (II) Initializing built-in extension XKEYBOARD
[ 28.280] (II) Initializing built-in extension XC-MISC
[ 28.280] (II) Initializing built-in extension SECURITY
[ 28.280] (II) Initializing built-in extension XINERAMA
[ 28.280] (II) Initializing built-in extension XFIXES
[ 28.280] (II) Initializing built-in extension RENDER
[ 28.280] (II) Initializing built-in extension RANDR
[ 28.280] (II) Initializing built-in extension COMPOSITE
[ 28.280] (II) Initializing built-in extension DAMAGE
[ 28.280] (II) SELinux: Disabled on system
[ 28.429] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.429] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.429] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 28.429] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.430] (II) AIGLX: Loaded and initialized i915
[ 28.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.431] (II) intel(0): Setting screen physical size to 270 x 203
[ 28.754] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 28.754] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.754] (II) LoadModule: "evdev"
[ 28.754] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.786] (II) Module evdev: vendor="X.Org Foundation"
[ 28.786] compiled for 1.12.1, module version = 2.7.0
[ 28.786] Module class: X.Org XInput Driver
[ 28.786] ABI class: X.Org XInput driver, version 16.0
[ 28.786] (II) Using input driver 'evdev' for 'Power Button'
[ 28.786] (**) Power Button: always reports core events
[ 28.787] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 28.787] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.787] (--) evdev: Power Button: Found keys
[ 28.787] (II) evdev: Power Button: Configuring as keyboard
[ 28.787] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 28.787] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.787] (**) Option "xkb_rules" "evdev"
[ 28.787] (**) Option "xkb_model" "pc105"
[ 28.787] (**) Option "xkb_layout" "us"
[ 28.789] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 28.789] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 28.789] (II) Using input driver 'evdev' for 'Sleep Button'
[ 28.789] (**) Sleep Button: always reports core events
[ 28.789] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 28.789] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 28.789] (--) evdev: Sleep Button: Found keys
[ 28.789] (II) evdev: Sleep Button: Configuring as keyboard
[ 28.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 28.789] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 28.789] (**) Option "xkb_rules" "evdev"
[ 28.789] (**) Option "xkb_model" "pc105"
[ 28.789] (**) Option "xkb_layout" "us"
[ 28.791] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
[ 28.791] (II) No input driver specified, ignoring this device.
[ 28.791] (II) This device may have been added with another device file.
[ 28.792] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 28.792] (II) No input driver specified, ignoring this device.
[ 28.792] (II) This device may have been added with another device file.
[ 28.792] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[ 28.792] (II) No input driver specified, ignoring this device.
[ 28.793] (II) This device may have been added with another device file.
[ 28.793] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 28.793] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 28.794] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 28.794] (**) Logitech USB Optical Mouse: always reports core events
[ 28.794] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 28.794] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 28.794] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 28.794] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 28.794] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 28.794] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 28.794] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 28.794] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 28.794] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 28.794] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.794] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1"
[ 28.794] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 28.794] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 28.795] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 28.795] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 28.795] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 28.795] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 28.796] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 28.796] (II) No input driver specified, ignoring this device.
[ 28.796] (II) This device may have been added with another device file.
[ 28.797] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event7)
[ 28.797] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 28.797] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 28.797] (**) USB 2.0 PC Camera: always reports core events
[ 28.797] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event7"
[ 28.797] (--) evdev: USB 2.0 PC Camera: Vendor 0x58f Product 0x5608
[ 28.797] (--) evdev: USB 2.0 PC Camera: Found keys
[ 28.797] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 28.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7/event7"
[ 28.797] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 9)
[ 28.797] (**) Option "xkb_rules" "evdev"
[ 28.797] (**) Option "xkb_model" "pc105"
[ 28.797] (**) Option "xkb_layout" "us"
[ 28.799] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 28.799] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 28.799] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 28.799] (**) AT Translated Set 2 keyboard: always reports core events
[ 28.799] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 28.799] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 28.799] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 28.799] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 28.799] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 28.799] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 28.799] (**) Option "xkb_rules" "evdev"
[ 28.799] (**) Option "xkb_model" "pc105"
[ 28.800] (**) Option "xkb_layout" "us"
[ 28.802] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8)
[ 28.802] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 28.802] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 28.802] (**) ACPI Virtual Keyboard Device: always reports core events
[ 28.802] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event8"
[ 28.802] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 28.802] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 28.802] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 28.802] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 28.802] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 11)
[ 28.802] (**) Option "xkb_rules" "evdev"
[ 28.802] (**) Option "xkb_model" "pc105"
[ 28.802] (**) Option "xkb_layout" "us"
[4249252.953] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[4249253.384] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[4249357.502] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
I have space separated the monitor EDID to ID the monitor as it was discovered.
All this is from an ssh -Y login. I am not physically at the monitor,
and its rather crowded around it, would be difficult to turn it around
and get the model off the sticker. I can later, after the coffee kicks
in ;)
>
> _______________________________________________
> xorg at lists.x.org: X.Org support
> Archives: http://lists.freedesktop.org/archives/xorg
> Info: http://lists.x.org/mailman/listinfo/xorg
> Your subscription address: %(user_address)s
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
More information about the xorg
mailing list