Xorg problem after update
Sérgio Basto
sergio at serjux.com
Thu Sep 5 13:12:46 PDT 2013
On Qui, 2013-09-05 at 21:49 +0200, Kenneth Brun Nielsen wrote:
> Hi Sergio,
>
>
> Thanks for your response.
>
>
> Yum distro-sync only changes some irrelevant (my humble judgement)
> packages - see bottom list.
OK, I agree , you have X updated,
>
> Notice, that Cadence ( http://www.cadence.com/ ) is installed at
> another host, which is Centos 5, i.e. it is not a local installation.
> I have no reason to believe, that a reinstallation will change
> anything. It works on all other tested clients, e.g. Windows Xming
> Xserver, Centos 5/6, Ubuntu 12 and - as mentioned - Fedora 17. And I
> tried on to different installation servers (Centos 5 and RHEL5).
>
agree , you do X forwarding with ssh -Y ?
and about systemctl status firewalld ?
you may try disable firewall with
systemctl stop firewalld
I think I can't help you further ...
>
> PS: Received spam from JP at eukor.com as reply on my previous mail to
> this mailing list.
>
>
> Best regards,
>
> Kenneth
>
> --
>
>
>
> $ yum distro-sync
> ================================================================================
> Package Arch Version Repository
> Size
>
> ================================================================================
>
> Downgrading:
> ffmpeg-libs x86_64 1.2.1-3.fc19
> rpmfusion-free 3.7 M
> gstreamer-ffmpeg x86_64 0.10.13-8.fc19
> rpmfusion-free 2.8 M
> gstreamer1-libav x86_64 1.0.6-1.fc19
> rpmfusion-free 2.8 M
> gstreamer1-plugins-bad-freeworld
> x86_64 1.0.6-1.fc19
> rpmfusion-free 157 k
> gstreamer1-plugins-ugly x86_64 1.0.6-2.fc19
> rpmfusion-free 237 k
> mencoder x86_64 1.1-8.20130416svn.fc19
> rpmfusion-free 832 k
> mplayer x86_64 1.1-8.20130416svn.fc19
> rpmfusion-free 1.1 M
> mplayer-common x86_64 1.1-8.20130416svn.fc19
> rpmfusion-free 1.2 M
> skype i586 2.1.0.81-fc10 skype
> 19 M
>
>
>
> On 5 September 2013 20:42, Sérgio Basto <sergio at serjux.com> wrote:
> On Qui, 2013-09-05 at 18:49 +0200, Kenneth Brun Nielsen wrote:
> > I run a program (Cadence IC6, which is Qt-based) on a remote
> machine
> > through SSH with X11 forwarding.
> >
> > After updating my client machine from Fedora17 to Fedora19
> 64-bit (X
> > version is 1.14.2-9, I believe - or please advice how I can
> check), I
> > get some errors when running the program.
> >
> > Here is a transcript of parts of the log:
> > --
> > Xlib: sequence lost (0x107f2 > 0x19ab) in reply type 0x0!
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 113 (X_KillClient)
> > Resource id: 0x18b0000
> > Xlib: sequence lost (0x10000 > 0x19ab) in reply type
> 0x0!
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0xff7ff87f
> > Xlib: sequence lost (0x10000 > 0x19ac) in reply type
> 0x2!
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > Xlib: sequence lost (0x10000 > 0x19b3) in reply type
> 0x0!
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > libManager Qt Warning: X Error: 0 0
> > Major opcode: 0 ()
> > Resource id: 0x0
> > Xlib: sequence lost (0x1411c > 0x19b3) in reply type
> 0x1c!
> > Xlib: sequence lost (0x1230f > 0x19b3) in reply type
> 0xf!
> > Xlib: sequence lost (0x10201 > 0x19b3) in reply type
> 0x1!
> > libManager Qt Warning: Qt-subapplication: Fatal IO
> error: client
> > killed
> > --
> >
> >
> > Also it is reflected in the dmesg of the server:
> > "libSelect[27710]: segfault at 0000000000000000 rip
> 00000000081db391
> > rsp 00000000ffba5380 error 4"
> >
> >
> > Well, any idea why I get these errors? And how I can debug
> or get rid
> > of them? I assume the problem is either Qt- or X-related,
> but honestly
> > I don't know much of these things.
> >
> >
> > Can it be a bug in X? Notice, that everything worked fine,
> when I was
> > using Fedora 17, so a change in Fedora 19 (X or Qt) provoked
> the
> > error. Also notice, that I'm not a developer and have close
> to no
> > insight into X (might be obvious from the above:)).
> >
> >
> > Any suggestions will be appreciated.
> >
> >
> > FYI, I also posted here (several days ago - still no
> answers):
> > http://forums.fedoraforum.org/showthread.php?t=293621
> > http://qt-project.org/forums/viewthread/31831/
> >
> > http://www.cadence.com/community/forums/T/27151.aspx
> >
> >
>
> in Fedora as root do:
> yum distro-sync
> and explain us how you install cadence ? maybe reinstall it.
> --
> Sérgio M. B.
>
>
>
--
Sérgio M. B.
More information about the xorg
mailing list