[ANNOUNCE] xf86-video-intel 2.99.901
Chris Wilson
chris at chris-wilson.co.uk
Wed Sep 4 08:33:55 PDT 2013
Snapshot 2.99.901 (2013-08-04)
==============================
What's this? A pre-release snapshot of an upcoming 3.0 major release?
What could be the big new feature about to land? SNA by default!
Not only that, we also have a preview of the XMir integration patches.
Whilst we consider the SNA acceleration method to be ready to take over
from UXA (the current acceleration method), it still remains possible to
switch over to the old method with the following xorg.conf snippet:
Section "Device"
Identifier "Device0"
Driver "intel"
Option "AccelMethod" "UXA"
EndSection
The promise of SNA is that it improves the user experience by providing a
faster, more fluid, desktop, that is both more power efficient and less
prone to crashes than UXA. If it still fails to meet your expections,
please file bugs!
Complete list of changes since 2.21.15
--------------------------------------
Chris Wilson (75):
sna/gen7: Prefer the render ring for more operations
sna/video: Disable the existing sprite when switching CRTCs
sna/dri: Make async blits async again
intel: Add experimental rendernode support
sna: Don't copy fbcon if hosted
sna: Trust the preferred-depth returned by the host
sna: Don't restrict the frontbuffer to be scanout capable if hosted
sna: Fix reversed logic and loss of trust in the host
sna/dri: Prefer the source ring
sna: Add a few more checks for a hosted Xserver before walking CRTC lists
sna: Make SetScreenPixmap do as it says
sna/gen7: Combine a couple of pipe-flushes
sna: Make sure we assert our Master status before copying the fbcon
sna: Fix ordering of assert vs the state it checks
sna: Promote no COWs assertion to a condition check before operating inplace
sna/video: Update sprite destination colorkey command
sna/video: Copy the ClipRegion for the sprite
sna/gen6+: Improve ring stickyness for BLT composite ops
sna/gen6+: Don't force a ring switch for likely TLB misses if already busy
sna: Allow user specification of number of VirtualHeads
sna/dri: Correct the target_msc for immediate double-buffering
sna: Protect against unattached pixmaps when peeking inside for a GPU bo
sna: Mark fake outputs as disconnected until a user applies a mode
sna: Open the device non-blocking
tools: Add intel-virtual-output to extend the local desktop with remote outputs
configure; Remember to disable building the tools
intel-virtual-output: use XRender for format conversion if required
intel-virtual-output: use depth-16 transfers for remote hosts or low bpp targets
intel-virtual-output: Fix calculation of image stride to include bitmap unit
sna: Expand the array of fake outputs if the last is used
intel-virtual-output: Third time lucky for computing the correct stride?
intel-virtual-output: Clone all outputs on the remote display
intel-virtual-output: Try to hide races with gnome-shell
intel-virtual-output: Manage multiple destination CRTCs
intel-virtual-output: Prevent cloning the same output twice
intel-virtual-output: Fix overun with the record Display connection
intel-virtual-output: Register as a singleton
intel-virtual-output: Rebuild pointers after realloc
intel-virtual-output: Refer to the new memory block after realloc
intel-virtual-output: Restore the lost POLLIN on the timerfd
intel-virtual-output: Add missing whitespace, s/while(1)/while (1)/
intel-virtual-output: Probe and automatically enable sibling screens
sna: Process winSize region
sna: Check for output->randr_output before dereferencing
intel-virtual-output: Decouple the fake mode before deleting
intel-virtual-overlay: Prevent buffer overrun reading the XEvent
intel-virtual-output: Fallback to Xinerama if RandR is not supported by the target
intel-virtual-output: Don't forget to name the mode
intel-virtual-overlay: Fix logic inversion from previous commit
intel-virtual-output: Refactor the image resizing code
intel-virtual-output: Reorder the fds
intel-virtual-ouptput: Filter and rate-limit cursor events
intel-virtual-output: Perform pixel type conversion from XfixesCursorImage
intel-virtual-overlay: Fix the bumblebee query parsing
intel-virtual-overlay: Don't do a sibling search if bumblebee is explicitly requested
intel-virtual-overlay: Disable the timer after flushing
intel-virtual-overlay: Keep bumblebeed awake
intel-virtual-output: Fallback to probing GetScreenResources
intel-virtual-overlay: Try to shutdown gracefully
intel-virtual-output: Don't set the SHM active flag along !SHM composite paths
intel-virtual-output: Remove the stray 1
intel-virtual-output: Don't clobber the XID inside the ShmSegmentInfo
intel-virtual-output: Remember to mark the timer as active when moving the mouse
intel-virtual-output: Clear send flags when doing XSync
sna: Add some more DBG
sna: Mark imported PRIME fd as starting in DOMAIN_NONE
sna/dri: Handle failure to move the pixmap into the GPU for CopyRegion
sna: Tidy walking the window tree for updating our pixmaps
sna/dri: Refine proposed async swap interface
sna: Fix sna_pixmap_move_area_to_gpu() to return the sna_pixmap
configure: Check for required UMS headers before enabling
sna: WriteThrough support is now upstream
sna: Add XMir support
intel: Select SNA as the default acceleration method
2.99.901 snapshot
git tag: 2.99.901
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-intel-2.99.901.tar.bz2
MD5: dcff2ce276bd2c38cb975d3e902fe975 xf86-video-intel-2.99.901.tar.bz2
SHA1: bf1838a014053f8d30acccd6394f40e7e3662ec3 xf86-video-intel-2.99.901.tar.bz2
SHA256: d9755d794cc0c70b7192384ffe8edfdd408446275ae4fc50226ad4e30abeb2b9 xf86-video-intel-2.99.901.tar.bz2
http://xorg.freedesktop.org/archive/individual/driver/xf86-video-intel-2.99.901.tar.gz
MD5: 688cd47bb2b0b6195de36b5ed46e37d2 xf86-video-intel-2.99.901.tar.gz
SHA1: 75ca7ab31ec871ae798c8ee0171c59a8ce30cec4 xf86-video-intel-2.99.901.tar.gz
SHA256: e118cbc2e59b51a6ef4e786510c6030077afe950ad98b9cfc0df2afd021f5deb xf86-video-intel-2.99.901.tar.gz
--
Chris Wilson, Intel Open Source Technology Centre
More information about the xorg
mailing list