Using Xorg radeon with a CRT screen
Peter Rasmussen
peterleifrasmussen at yahoo.com
Sun Oct 14 00:53:31 PDT 2012
I have been running X.Org X Server 1.4.2 from Slackware 12.1 for some time and would now like to upgrade to the newest X (X.Org X Server 1.12.3) by installing Slackware 14.
There seems to be some problems.
I have the following HW:
Video board: Radeon HD 3300
Monitor: ViewSonic P225f
And I would like to run it at at least 1600x1200 @75Hz vertical refresh.
The best it will do with Xorg 1.12.3 is 1024x768 at 60Hz, a Vesa standard.
I have looked at http://wiki.x.org and around the web and seen some suggestions with how to deal with Xorg and CRT screens, but I can't make them work.
The xorg.conf that I use with Xorg 1.4.2, but that doesn't work now, and the output of running "X -configure" with Xorg 1.12.3 is pasted below.
I haven't pasted the /var/log/Xorg.0.log file as it is rather large and I don't know what is significant over what "X -configure" doesn't show.
It seems that a probable significant change is that in the old Xorg the driver is "radeonhd" exist, which it doesn't now?
Isn't the functionality in 'radeonhd' now included in the radeon driver?
Please let me know if you have any suggestions of what I can do and if you need additional info?
Thank you and best regards,
Peter
# cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "dk"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "evdev"
Option "device" "/dev/input/by-id/usb-MLK_OM1007_Wireless_Mouse-event-mouse"
Option "HWheelRelativeAxisButtons" "7 6"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "ViewSonic"
ModelName "ViewSonic P225f-5"
HorizSync 100-127
VertRefresh 80-180
EndSection
Section "Device"
Identifier "device1"
VendorName "ATI Technologies Inc"
BoardName "ATI Radeon X1300 and later"
Driver "radeonhd"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 24
Modes "2048x1536" "1600x1200"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
Screen "screen1"
EndSection
# cat /disk/hdc7/root/X.configure.14Oct2012
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Slackware 14.0 Slackware Linux Project
Current Operating System: Linux kultorvet 3.2.29-smp #2 SMP Mon Sep 17 13:16:43 CDT 2012 i686
Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 SLACK_KERNEL=hugesmp.s BOOT_IMAGE=/kernels/hugesmp.s/bzImage root=/dev/sdb7 rdinit= ro
Build Date: 23 August 2012 02:27:55PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 14 07:23:39 2012
List of video drivers:
neomagic
ztv
sis
geode
i740
cirrus
apm
mach64
savage
tdfx
ati
i128
openchrome
vmware
tga
v4l
ark
dummy
s3
ast
nv
chips
trident
intel
modesetting
r128
radeon
nouveau
glint
siliconmotion
mga
s3virge
voodoo
rendition
vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error (2). Closing log file.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20121014/12a19655/attachment.html>
More information about the xorg
mailing list