Mousepad - how to disable tapping?

[Kamil Jońca]

I have got something like:
http://www.amazon.co.uk/Perixx-PERIPAD-501-86x75x11mm-Industrial-Professional/dp/B001CX85I8

with lsusb it shows as:
--8<---------------cut here---------------start------------->8---
Bus 001 Device 092: ID 099a:a002 Zippy Technology Corp. 
--8<---------------cut here---------------end--------------->8---

Relevant xorg logs are
--8<---------------cut here---------------start------------->8---
[1291767.832] (II) config/udev: Adding input device Mouse Pad (/dev/input/mouse1)
[1291767.832] (**) Mouse Pad: Applying InputClass "mousepad"
[1291767.832] (II) No input driver specified, ignoring this device.
[1291767.832] (II) This device may have been added with another device file.
[1291767.837] (II) config/udev: Adding input device Mouse Pad (/dev/input/event7)
[1291767.837] (**) Mouse Pad: Applying InputClass "evdev pointer catchall"
[1291767.837] (**) Mouse Pad: Applying InputClass "mousepad"
[1291767.837] (**) Mouse Pad: Applying InputClass "evdev pointer catchall"
[1291767.837] (II) Using input driver 'evdev' for 'Mouse Pad'
[1291767.837] (**) Mouse Pad: always reports core events
[1291767.837] (**) evdev: Mouse Pad: Device: "/dev/input/event7"
[1291767.837] (--) evdev: Mouse Pad: Vendor 0x99a Product 0xa002
[1291767.837] (--) evdev: Mouse Pad: Found 3 mouse buttons
[1291767.837] (--) evdev: Mouse Pad: Found scroll wheel(s)
[1291767.837] (--) evdev: Mouse Pad: Found relative axes
[1291767.837] (--) evdev: Mouse Pad: Found x and y relative axes
[1291767.838] (II) evdev: Mouse Pad: Configuring as mouse
[1291767.838] (II) evdev: Mouse Pad: Adding scrollwheel support
[1291767.838] (**) Option "Emulate3Buttons" "on"
[1291767.838] (**) evdev: Mouse Pad: YAxisMapping: buttons 4 and 5
[1291767.838] (**) evdev: Mouse Pad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1291767.838] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input70/event7"
[1291767.838] (II) XINPUT: Adding extended input device "Mouse Pad" (type: MOUSE, id 8)
[1291767.838] (II) evdev: Mouse Pad: initialized for relative axes.
[1291767.838] (**) Mouse Pad: (accel) keeping acceleration scheme 1
[1291767.838] (**) Mouse Pad: (accel) acceleration profile 0
[1291767.839] (**) Mouse Pad: (accel) acceleration factor: 2.000
[1291767.839] (**) Mouse Pad: (accel) acceleration threshold: 4
--8<---------------cut here---------------end--------------->8---


I added Input section for it:

--8<---------------cut here---------------start------------->8---
Section "InputClass"
        Identifier "mousepad"
        MatchProduct "Mouse Pad"
        Option "Emulate3Buttons" "on"
EndSection
--8<---------------cut here---------------end--------------->8---

And now everything works fine except two things:
1. Cannot disable tapping. I tried to use "synaptic" driver for this
device, but got only something like "cannot determine protocol". 
2. How can I tune acceleration?


KJ



-- 
http://sporothrix.wordpress.com/2011/01/16/usa-sie-krztusza-kto-nastepny/
The only reward of virtue is virtue.
		-- Ralph Waldo Emerson