Regarding Xorg
vkpulluri
vijaykumar.pulluri at cmcltd.com
Thu May 17 22:46:34 PDT 2012
Hello all,
I am working on imx53 sabre board. & my interest is to run Xorg on
the board not Xfbdev.
So I made necessary changes to ltib and build the source.
but when I am running on the board I am unable to run Xorg. & I am
ending with following errors
(EE) Failed to load module "glx" (module does not exist, 0)
(EE) Failed to load module "dri" (module does not exist, 0)
Could you Please help me regarding these Issue
PFA for Xorg.conf , Xorg.0.log
FYI I could not find libglx.so libdri.so in
/usr/lib/xorg/modules/extensions location
lib in usr/lib/xorg/modules/
libfb.so libshadowfb.so libvbe.so libwfb.so libxf8_16bpp.so
libexa.so libint10.so libshadow.so libvgahw.so libxaa.so
In usr/lib/xorg/modules/extension
I have only these two libdbe.so libextmod.so
In usr/lib/xorg/modules/input
I have these kbd_drv.so mouse_drv.so
In usr/lib/xorg/modules/drivers
I have imx_drv.so
In usr/lib/xorg/modules/linux
I have libfbdevhw.so
In usr/lib/xorg/modules/multimedia
I have bt829_drv.so fi1236_drv.so msp3430_drv.so tda8425_drv.so
tda9850_drv.so tda9885_drv.so uda1380_drv.so these dynamic libs
Please help me How can I run Xorg
Thanks & Regards,
Vijay Kumar Pulluri
______________________________________________________________________________
DISCLAIMER
The information contained in this e-mail message and/or attachments to it may
contain confidential or privileged information. If you are not the intended
recipient, any dissemination, use, review, distribution, printing or copying
of the information contained in this e-mail message and/or attachments to it
are strictly prohibited. If you have received this communication in error,
please notify us by reply e-mail or directly to netsupport at cmcltd.com or
telephone and immediately and permanently delete the message and any
attachments. Thank you.
______________________________________________________________________________
This email has been scrubbed for your protection by SecureMX.
For more information visit http://securemx.in
_____________________________________________________________________________
-------------- next part --------------
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "i.MX Accelerated Framebuffer Device"
Driver "imx"
Option "fbdev" "/dev/fb0"
# This option only recognized when "mxc_epdc_fb" frame buffer driver in
# use. Values are "RGB565" (default, 16-bit RGB), "Y8" (8-bit gray),
# and "Y8INV" (8-bit gray inverted).
Option "FormatEPDC" "Y8INV"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "i.MX Accelerated Framebuffer Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: text/x-log
Size: 5098 bytes
Desc: not available
URL: <http://lists.x.org/archives/xorg/attachments/20120518/ae8d74d3/attachment.bin>
More information about the xorg
mailing list