I can not use 120Hz with nouveau
HacKurx
hackurx at gmail.com
Thu Jul 5 23:10:51 PDT 2012
Thank you for your reply, I tried but it does not change, here is what
appears in my log :
[ 428.160] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1258
[ 428.160] (II) NOUVEAU(0): Using hsync ranges from config file
[ 428.160] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 428.160] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680
1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 238.46 1680
1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz e)
[ 428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 218.59 1680
1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz e)
[ 428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 198.72 1680
1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz e)
Thanks
2012/7/5 Maarten Maathuis <madman2003 at gmail.com>:
> On Thu, Jul 5, 2012 at 8:38 PM, HacKurx <hackurx at gmail.com> wrote:
>> Hello,
>>
>> Can you help me?
>> I cannot use 120Hz on my Samsung 2233RZ with nouveau.
>>
>> My xorg.conf :
>> https://forums.gentoo.org/viewtopic-t-929124.html
>>
>> Thanks
>>
>> Best regards,
>>
>> HacKurx
>> www.hackurx.info
>> _______________________________________________
>> xorg at lists.x.org: X.Org support
>> Archives: http://lists.freedesktop.org/archives/xorg
>> Info: http://lists.x.org/mailman/listinfo/xorg
>> Your subscription address: madman2003 at gmail.com
>
> Have you tried "xrandr --output DVI-I-1 --mode 1680x1050 --rate 120"?
>
> --
> Far away from the primal instinct, the song seems to fade away, the
> river get wider between your thoughts and the things we do and say.
--
Best regards,
HacKurx
www.hackurx.info
More information about the xorg
mailing list