I can not use 120Hz with nouveau

[HacKurx]

Hi,

I got the solution to reach 120Hz I need to use the following command:

xrandr --output DVI-I-1 --set "scaling mode" None

Thanks


2012/7/6 Maarten Maathuis <madman2003 at gmail.com>

> If you look at "xrandr --verbose" you will see an property that is
> called "scaling mode", set that to none and that should give the same
> effect.
>
> But i still get the impression that the 120Hz mode doesn't even stick,
> regardless of whether it's using the native mode or not.
>
> On Fri, Jul 6, 2012 at 9:52 AM, HacKurx <hackurx at gmail.com> wrote:
> > For 120Hz with nvidia driver I had to disable the following option:
> > http://img15.hostingpics.net/pics/250362Nvidia120Hz.png
> >
> > "Force Full GPU Scaling".
> >
> > Thanks
> >
> > 2012/7/6 HacKurx <hackurx at gmail.com>:
> >> Thank you for your reply, I tried but it does not change, here is what
> >> appears in my log :
> >>
> >> [   428.160] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1258
> >> [   428.160] (II) NOUVEAU(0): Using hsync ranges from config file
> >> [   428.160] (II) NOUVEAU(0): Using vrefresh ranges from config file
> >> [   428.160] (II) NOUVEAU(0): Printing DDC gathered Modelines:
> >> [   428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680
> >> 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
> >> [   428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  238.46  1680
> >> 1728 1760 1840  1050 1053 1059 1080 +hsync +vsync (129.6 kHz e)
> >> [   428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  218.59  1680
> >> 1728 1760 1840  1050 1053 1059 1080 +hsync +vsync (118.8 kHz e)
> >> [   428.160] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  198.72  1680
> >> 1728 1760 1840  1050 1053 1059 1080 +hsync +vsync (108.0 kHz e)
> >>
> >> Thanks
> >>
> >> 2012/7/5 Maarten Maathuis <madman2003 at gmail.com>:
> >>> On Thu, Jul 5, 2012 at 8:38 PM, HacKurx <hackurx at gmail.com> wrote:
> >>>> Hello,
> >>>>
> >>>> Can you help me?
> >>>> I cannot use 120Hz on my Samsung 2233RZ with nouveau.
> >>>>
> >>>> My xorg.conf :
> >>>> https://forums.gentoo.org/viewtopic-t-929124.html
> >>>>
> >>>> Thanks
> >>>>
> >>>> Best regards,
> >>>>
> >>>> HacKurx
> >>>> www.hackurx.info
> >>>> _______________________________________________
> >>>> xorg at lists.x.org: X.Org support
> >>>> Archives: http://lists.freedesktop.org/archives/xorg
> >>>> Info: http://lists.x.org/mailman/listinfo/xorg
> >>>> Your subscription address: madman2003 at gmail.com
> >>>
> >>> Have you tried "xrandr --output DVI-I-1 --mode 1680x1050 --rate 120"?
> >>>
> >>> --
> >>> Far away from the primal instinct, the song seems to fade away, the
> >>> river get wider between your thoughts and the things we do and say.
> >>
> >>
> >>
> >> --
> >> Best regards,
> >>
> >> HacKurx
> >> www.hackurx.info
> >
> >
> >
> > --
> > Best regards,
> >
> > HacKurx
> > www.hackurx.info
>
>
>
> --
> Far away from the primal instinct, the song seems to fade away, the
> river get wider between your thoughts and the things we do and say.
>



-- 
Best regards,

HacKurx
www.hackurx.info
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20120827/df5e992e/attachment.html>