evdev devices in xorg.conf
Peter Hutterer
peter.hutterer at who-t.net
Thu May 5 16:26:57 PDT 2011
On Tue, May 03, 2011 at 08:50:28AM +0200, Zoltan Szecsei wrote:
> On 2011-05-03 08:21, Peter Hutterer wrote:
> >On Tue, May 03, 2011 at 07:47:24AM +0200, Zoltan Szecsei wrote:
> >
> >that just means that the device didn't get added for some reason. Nothing
> >that should affect the working of the server (other than that you obviously
> >can't use this device). If you ssh in before, you'll probably notice that
> >this line is already in the log while you're logging in. from your last
> >backtrace, it's the graphics driver that hangs.
> >
> Hi Peter,
> Nope - I have had the machine on for a while this morning, and not
> logged in via the consoe.
>
> I've just dived in over ssh and extracted these files:
ssh in before it hangs, attach gdb and once it hangs, ctrl+c and get a
backtrace. if it hangs in WaitForSomething, then it's more likely a stuck
grab (but in this case you should still see rendering happening).
Cheers,
Peter
> --
>
> ===========================================
> Zoltan Szecsei PrGISc [PGP0031]
> Geograph (Pty) Ltd.
> P.O. Box 7, Muizenberg 7950, South Africa.
>
> 65 Main Road, Muizenberg 7945
> Western Cape, South Africa.
>
> 34° 6'16.35"S 18°28'5.62"E
>
> Tel: +27-21-7884897 Mobile: +27-83-6004028
> Fax: +27-86-6115323 www.geograph.co.za
> ===========================================
>
> [ 11.941]
> X.Org X Server 1.10.1
> Release Date: 2011-04-15
> [ 12.091] X Protocol Version 11, Revision 0
> [ 12.091] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
> [ 12.091] Current Operating System: Linux gl00 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686
> [ 12.091] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=7fb37a7b-a136-4b7b-bcc1-2beee1e49fd6 ro quiet splash vt.handoff=7
> [ 12.091] Build Date: 19 April 2011 03:33:17PM
> [ 12.091] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support)
> [ 12.091] Current version of pixman: 0.20.2
> [ 12.091] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 12.091] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 12.091] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 3 07:14:09 2011
> [ 12.091] (==) Using config file: "/etc/X11/xorg.conf"
> [ 12.091] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> [ 12.091] (==) ServerLayout "Layouttop"
> [ 12.091] (**) |-->Screen "Screentop" (0)
> [ 12.091] (**) | |-->Monitor "LP2065top"
> [ 12.092] (**) | |-->Device "ENGT430top"
> [ 12.092] (**) |-->Input Device "Keyboardtop"
> [ 12.092] (**) |-->Input Device "Mousetop"
> [ 12.092] (**) Option "IsolateDevice" "PCI:3:0:0"
> [ 12.092] (**) Option "DontVTSwitch"
> [ 12.092] (==) Automatically adding devices
> [ 12.092] (==) Automatically enabling devices
> [ 12.092] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
> [ 12.092] Entry deleted from font path.
> [ 12.092] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
> [ 12.092] Entry deleted from font path.
> [ 12.092] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
> [ 12.092] Entry deleted from font path.
> [ 12.092] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
> [ 12.092] Entry deleted from font path.
> [ 12.092] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
> [ 12.092] Entry deleted from font path.
> [ 12.092] (==) FontPath set to:
> /usr/share/fonts/X11/misc,
> /usr/share/fonts/X11/Type1,
> /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
> built-ins
> [ 12.092] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
> [ 12.092] (II) Loader magic: 0x81ffde0
> [ 12.092] (II) Module ABI versions:
> [ 12.092] X.Org ANSI C Emulation: 0.4
> [ 12.092] X.Org Video Driver: 10.0
> [ 12.092] X.Org XInput driver : 12.3
> [ 12.092] X.Org Server Extension : 5.0
> [ 12.093] (--) PCI:*(0:3:0:0) 10de:0de1:1043:836d rev 161, Mem @ 0xfa000000/16777216, 0xd8000000/134217728, 0xd6000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
> [ 12.093] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
> [ 12.093] (II) LoadModule: "extmod"
> [ 12.094] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
> [ 12.094] (II) Module extmod: vendor="X.Org Foundation"
> [ 12.094] compiled for 1.10.1, module version = 1.0.0
> [ 12.094] Module class: X.Org Server Extension
> [ 12.094] ABI class: X.Org Server Extension, version 5.0
> [ 12.094] (II) Loading extension MIT-SCREEN-SAVER
> [ 12.094] (II) Loading extension XFree86-VidModeExtension
> [ 12.094] (II) Loading extension XFree86-DGA
> [ 12.094] (II) Loading extension DPMS
> [ 12.094] (II) Loading extension XVideo
> [ 12.094] (II) Loading extension XVideo-MotionCompensation
> [ 12.094] (II) Loading extension X-Resource
> [ 12.094] (II) LoadModule: "dbe"
> [ 12.094] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
> [ 12.094] (II) Module dbe: vendor="X.Org Foundation"
> [ 12.094] compiled for 1.10.1, module version = 1.0.0
> [ 12.094] Module class: X.Org Server Extension
> [ 12.094] ABI class: X.Org Server Extension, version 5.0
> [ 12.094] (II) Loading extension DOUBLE-BUFFER
> [ 12.094] (II) LoadModule: "glx"
> [ 12.094] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
> [ 12.106] (II) Module glx: vendor="NVIDIA Corporation"
> [ 12.106] compiled for 4.0.2, module version = 1.0.0
> [ 12.106] Module class: X.Org Server Extension
> [ 12.106] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
> [ 12.106] (II) Loading extension GLX
> [ 12.106] (II) LoadModule: "record"
> [ 12.106] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
> [ 12.106] (II) Module record: vendor="X.Org Foundation"
> [ 12.106] compiled for 1.10.1, module version = 1.13.0
> [ 12.106] Module class: X.Org Server Extension
> [ 12.106] ABI class: X.Org Server Extension, version 5.0
> [ 12.106] (II) Loading extension RECORD
> [ 12.106] (II) LoadModule: "dri"
> [ 12.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
> [ 12.106] (II) Module dri: vendor="X.Org Foundation"
> [ 12.106] compiled for 1.10.1, module version = 1.0.0
> [ 12.106] ABI class: X.Org Server Extension, version 5.0
> [ 12.106] (II) Loading extension XFree86-DRI
> [ 12.106] (II) LoadModule: "dri2"
> [ 12.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
> [ 12.106] (II) Module dri2: vendor="X.Org Foundation"
> [ 12.106] compiled for 1.10.1, module version = 1.2.0
> [ 12.106] ABI class: X.Org Server Extension, version 5.0
> [ 12.106] (II) Loading extension DRI2
> [ 12.106] (II) LoadModule: "nvidia"
> [ 12.107] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
> [ 12.107] (II) Module nvidia: vendor="NVIDIA Corporation"
> [ 12.107] compiled for 4.0.2, module version = 1.0.0
> [ 12.107] Module class: X.Org Video Driver
> [ 12.107] (II) LoadModule: "evdev"
> [ 12.107] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 12.107] (II) Module evdev: vendor="X.Org Foundation"
> [ 12.107] compiled for 1.10.0.902, module version = 2.6.0
> [ 12.107] Module class: X.Org XInput Driver
> [ 12.107] ABI class: X.Org XInput driver, version 12.3
> [ 12.107] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
> [ 12.107] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
> [ 12.107] (++) using VT number 7
>
> [ 12.107] (II) Loading sub module "fb"
> [ 12.107] (II) LoadModule: "fb"
> [ 12.107] (II) Loading /usr/lib/xorg/modules/libfb.so
> [ 12.108] (II) Module fb: vendor="X.Org Foundation"
> [ 12.108] compiled for 1.10.1, module version = 1.0.0
> [ 12.108] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 12.108] (II) Loading sub module "wfb"
> [ 12.108] (II) LoadModule: "wfb"
> [ 12.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
> [ 12.108] (II) Module wfb: vendor="X.Org Foundation"
> [ 12.108] compiled for 1.10.1, module version = 1.0.0
> [ 12.108] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 12.108] (II) Loading sub module "ramdac"
> [ 12.108] (II) LoadModule: "ramdac"
> [ 12.108] (II) Module "ramdac" already built-in
> [ 12.108] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
> [ 12.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
> [ 12.108] (II) Loading /usr/lib/xorg/modules/libfb.so
> [ 12.108] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
> [ 12.108] (==) NVIDIA(0): RGB weight 888
> [ 12.108] (==) NVIDIA(0): Default visual is TrueColor
> [ 12.108] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 12.108] (**) NVIDIA(0): Option "UseInt10Module" "True"
> [ 12.108] (II) Loading sub module "int10"
> [ 12.108] (II) LoadModule: "int10"
> [ 12.108] (II) Loading /usr/lib/xorg/modules/libint10.so
> [ 12.108] (II) Module int10: vendor="X.Org Foundation"
> [ 12.108] compiled for 1.10.1, module version = 1.0.0
> [ 12.108] ABI class: X.Org Video Driver, version 10.0
> [ 12.108] (II) NVIDIA(0): Bad V_BIOS checksum
> [ 12.109] (II) NVIDIA(0): Primary V_BIOS segment is: 0xc000
> [ 12.713] (II) NVIDIA(GPU-0): Display (HP LP2065 (DFP-0)) does not support NVIDIA 3D Vision
> [ 12.713] (II) NVIDIA(GPU-0): stereo.
> [ 12.714] (II) NVIDIA(0): NVIDIA GPU GeForce GT 430 (GF108) at PCI:3:0:0 (GPU-0)
> [ 12.714] (--) NVIDIA(0): Memory: 1048576 kBytes
> [ 12.714] (--) NVIDIA(0): VideoBIOS: 70.08.29.00.01
> [ 12.714] (II) NVIDIA(0): Detected PCI Express Link width: 16X
> [ 12.714] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> [ 12.714] (--) NVIDIA(0): Connected display device(s) on GeForce GT 430 at PCI:3:0:0
> [ 12.714] (--) NVIDIA(0): HP LP2065 (DFP-0)
> [ 12.714] (--) NVIDIA(0): HP LP2065 (DFP-0): 330.0 MHz maximum pixel clock
> [ 12.714] (--) NVIDIA(0): HP LP2065 (DFP-0): Internal Dual Link TMDS
> [ 12.750] (II) NVIDIA(0): Assigned Display Device: DFP-0
> [ 12.750] (II) NVIDIA(0): Validated modes:
> [ 12.750] (II) NVIDIA(0): "1600x1200"
> [ 12.750] (II) NVIDIA(0): "1024x768"
> [ 12.750] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
> [ 12.775] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
> [ 12.776] (--) NVIDIA(0): option
> [ 12.776] (--) Depth 24 pixmap format is 32 bpp
> [ 12.776] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
> [ 12.776] (II) NVIDIA: access.
> [ 12.782] (II) NVIDIA(0): Setting mode "1600x1200"
> [ 12.815] (II) Loading extension NV-GLX
> [ 12.867] (==) NVIDIA(0): Disabling shared memory pixmaps
> [ 12.867] (==) NVIDIA(0): Backing store disabled
> [ 12.867] (==) NVIDIA(0): Silken mouse enabled
> [ 12.868] (**) NVIDIA(0): DPMS enabled
> [ 12.868] (II) Loading extension NV-CONTROL
> [ 12.868] (II) Loading extension XINERAMA
> [ 12.868] (II) Loading sub module "dri2"
> [ 12.868] (II) LoadModule: "dri2"
> [ 12.868] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
> [ 12.868] (II) Module dri2: vendor="X.Org Foundation"
> [ 12.868] compiled for 1.10.1, module version = 1.2.0
> [ 12.868] ABI class: X.Org Server Extension, version 5.0
> [ 12.868] (II) NVIDIA(0): [DRI2] Setup complete
> [ 12.868] (==) RandR enabled
> [ 12.868] (II) Initializing built-in extension Generic Event Extension
> [ 12.868] (II) Initializing built-in extension SHAPE
> [ 12.868] (II) Initializing built-in extension MIT-SHM
> [ 12.868] (II) Initializing built-in extension XInputExtension
> [ 12.868] (II) Initializing built-in extension XTEST
> [ 12.868] (II) Initializing built-in extension BIG-REQUESTS
> [ 12.868] (II) Initializing built-in extension SYNC
> [ 12.868] (II) Initializing built-in extension XKEYBOARD
> [ 12.868] (II) Initializing built-in extension XC-MISC
> [ 12.868] (II) Initializing built-in extension SECURITY
> [ 12.868] (II) Initializing built-in extension XINERAMA
> [ 12.868] (II) Initializing built-in extension XFIXES
> [ 12.868] (II) Initializing built-in extension RENDER
> [ 12.868] (II) Initializing built-in extension RANDR
> [ 12.868] (II) Initializing built-in extension COMPOSITE
> [ 12.868] (II) Initializing built-in extension DAMAGE
> [ 12.868] (II) Initializing built-in extension GESTURE
> [ 12.870] (II) Initializing extension GLX
> [ 12.887] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
> [ 12.887] (II) Using input driver 'evdev' for 'Keyboardtop'
> [ 12.888] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 12.888] (**) Option "CoreKeyboard"
> [ 12.888] (**) Keyboardtop: always reports core events
> [ 12.888] (EE) Keyboardtop: No device specified.
> [ 12.888] (EE) PreInit returned 2 for "Keyboardtop"
> [ 12.888] (II) UnloadModule: "evdev"
> [ 12.888] (II) Unloading evdev
> [ 12.888] (II) Using input driver 'evdev' for 'Mousetop'
> [ 12.888] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 12.888] (**) Option "CorePointer"
> [ 12.888] (**) Mousetop: always reports core events
> [ 12.888] (EE) Mousetop: No device specified.
> [ 12.888] (EE) PreInit returned 2 for "Mousetop"
> [ 12.888] (II) UnloadModule: "evdev"
> [ 12.888] (II) Unloading evdev
> [ 12.893] (II) config/udev: Adding input device Power Button (/dev/input/event1)
> [ 12.893] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 12.893] (II) Using input driver 'evdev' for 'Power Button'
> [ 12.893] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 12.893] (**) Power Button: always reports core events
> [ 12.893] (**) Power Button: Device: "/dev/input/event1"
> [ 12.928] (--) Power Button: Found keys
> [ 12.928] (II) Power Button: Configuring as keyboard
> [ 12.928] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
> [ 12.928] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
> [ 12.928] (**) Option "xkb_rules" "evdev"
> [ 12.928] (**) Option "xkb_model" "pc105"
> [ 12.928] (**) Option "xkb_layout" "us"
> [ 12.929] (II) config/udev: Adding input device Power Button (/dev/input/event0)
> [ 12.929] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 12.929] (II) Using input driver 'evdev' for 'Power Button'
> [ 12.929] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 12.929] (**) Power Button: always reports core events
> [ 12.929] (**) Power Button: Device: "/dev/input/event0"
> [ 12.972] (--) Power Button: Found keys
> [ 12.972] (II) Power Button: Configuring as keyboard
> [ 12.972] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
> [ 12.972] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
> [ 12.972] (**) Option "xkb_rules" "evdev"
> [ 12.972] (**) Option "xkb_model" "pc105"
> [ 12.972] (**) Option "xkb_layout" "us"
> [ 12.976] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event4)
> [ 12.976] (II) No input driver/identifier specified (ignoring)
> [ 12.977] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
> [ 12.977] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
> [ 12.977] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
> [ 12.977] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 12.977] (**) Logitech USB Receiver: always reports core events
> [ 12.977] (**) Logitech USB Receiver: Device: "/dev/input/event2"
> [ 13.012] (--) Logitech USB Receiver: Found keys
> [ 13.012] (II) Logitech USB Receiver: Configuring as keyboard
> [ 13.012] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2/event2"
> [ 13.012] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
> [ 13.012] (**) Option "xkb_rules" "evdev"
> [ 13.012] (**) Option "xkb_model" "pc105"
> [ 13.012] (**) Option "xkb_layout" "us"
> [ 13.012] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
> [ 13.012] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
> [ 13.012] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
> [ 13.012] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
> [ 13.012] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 13.012] (**) Logitech USB Receiver: always reports core events
> [ 13.012] (**) Logitech USB Receiver: Device: "/dev/input/event3"
> [ 13.060] (--) Logitech USB Receiver: Found 12 mouse buttons
> [ 13.060] (--) Logitech USB Receiver: Found scroll wheel(s)
> [ 13.060] (--) Logitech USB Receiver: Found relative axes
> [ 13.060] (--) Logitech USB Receiver: Found x and y relative axes
> [ 13.060] (--) Logitech USB Receiver: Found absolute axes
> [ 13.060] (II) evdev-grail: failed to open grail, no gesture support
> [ 13.060] (--) Logitech USB Receiver: Found keys
> [ 13.060] (II) Logitech USB Receiver: Configuring as mouse
> [ 13.060] (II) Logitech USB Receiver: Configuring as keyboard
> [ 13.060] (II) Logitech USB Receiver: Adding scrollwheel support
> [ 13.060] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
> [ 13.060] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 13.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3/event3"
> [ 13.060] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
> [ 13.060] (**) Option "xkb_rules" "evdev"
> [ 13.060] (**) Option "xkb_model" "pc105"
> [ 13.060] (**) Option "xkb_layout" "us"
> [ 13.060] (II) Logitech USB Receiver: initialized for relative axes.
> [ 13.060] (WW) Logitech USB Receiver: ignoring absolute axes.
> [ 13.060] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
> [ 13.060] (**) Logitech USB Receiver: (accel) acceleration profile 0
> [ 13.060] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
> [ 13.060] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
> [ 13.060] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
> [ 13.060] (II) No input driver/identifier specified (ignoring)
> # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> # nvidia-xconfig: version 270.41.06 (buildmeister at swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:12 PDT 2011
>
>
> Section "ServerFlags"
> Option "DontVTSwitch"
> Option "HandleSpecialKeys" "Always"
> EndSection
>
> Section "Files"
> # FontPath "/usr/share/X11/fonts/misc"
> # FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
> # FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
> # FontPath "/usr/share/X11/fonts/Type1"
> # FontPath "/usr/share/X11/fonts/100dpi"
> # FontPath "/usr/share/X11/fonts/75dpi"
> # FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> EndSection
>
> #Section "Module"
> # Load "i2c"
> # Load "bitmap"
> # Load "ddc"
> # Load "extmod"
> # Load "freetype"
> # Load "glx"
> # Load "int10"
> # Load "type1"
> # Load "vbe"
> #EndSection
>
> ################################################################### SERVER definitions
>
> #Section "ServerLayout"
> # Identifier "MultiSeat"
> # Screen "Dummy Screen"
> # InputDevice "Generic Keyboard"
> # InputDevice "Configured Mouse"
> #EndSection
>
> Section "ServerLayout"
> Identifier "Layouttop"
> Screen "Screentop"
> InputDevice "Keyboardtop" "CoreKeyboard"
> InputDevice "Mousetop" "CorePointer"
> Option "IsolateDevice" "PCI:3:0:0"
> EndSection
>
> ################################################################### MOUSE definitions
>
> #Section "InputDevice"
> # Identifier "Configured Mouse"
> # Driver "mouse"
> # Option "CorePointer"
> ## Option "Device" "/dev/input/mice"
> # Option "Device" "/dev/input/mouse0"
> # Option "Protocol" "ExplorerPS/2"
> # Option "ZAxisMapping" "4 5"
> # Option "Emulate3Buttons" "true"
> #EndSection
>
> Section "InputDevice"
> Identifier "Mousetop"
> # Driver "mouse"
> # Option "Phys" "usb-0000:00:1d.7-4.3/input1"
> Driver "evdev"
> Option "Phys" "pci-0000:00:1d.1-usb-0:2:1.1-event-mouse"
> # Option "Device" "/dev/input/event3"
> Option "Protocol" "auto"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "true"
> EndSection
>
> ################################################################### KEYBOARD definitions
>
> #Section "InputDevice"
> # Identifier "Generic Keyboard"
> # Driver "kbd"
> # Option "CoreKeyboard"
> # Option "XkbRules" "xorg"
> # Option "XkbModel" "pc104"
> # Option "XkbLayout" "us"
> #EndSection
>
> Section "InputDevice"
> Identifier "Keyboardtop"
> Driver "evdev"
> # Option "Phys" "usb-0000:00:1d.7-4.3/input0"
> # Option "Phys" "pci-0000:00:1d.1-usb-0:2:1.0-event-kbd"
> # Option "Device" "/dev/input/event2"
> EndSection
>
> ################################################################### LCD Monitors
>
> #Section "Monitor"
> # Identifier "Generic Monitor"
> # HorizSync 28.0 - 80.0
> # VertRefresh 43.0 - 60.0
> # Option "DPMS"
> #EndSection
>
> Section "Monitor"
> Identifier "LP2065top"
> HorizSync 30.0 - 92.0
> VertRefresh 48.0 - 85.0
> Option "DPMS"
> EndSection
>
> ################################################################### VGA Cards
>
> #Section "Device"
> # Identifier "Dummy"
> # Driver "dummy"
> # VideoRam 75
> #EndSection
>
> Section "Device"
> Identifier "ENGT430top"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BusID "PCI:3:0:0"
> Option "UseInt10Module" "True"
> EndSection
>
> ################################################################### Tie together as SCREENs
>
> #Section "Screen"
> # Identifier "Dummy Screen"
> # Device "Dummy"
> # Monitor "Generic Monitor"
> # DefaultDepth 8
> # SubSection "Display"
> # Modes "320x240"
> # EndSubSection
> #EndSection
>
> Section "Screen"
> Identifier "Screentop"
> Device "ENGT430top"
> Monitor "LP2065top"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1600x1200" "1024x768"
> EndSubSection
> EndSection
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.38-8-generic (buildd at vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
> [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
> [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
> [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
> [ 0.000000] DMI 2.5 present.
> [ 0.000000] DMI: System manufacturer System Product Name/P6X58D-E, BIOS 0502 11/16/2010
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x100000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-E3FFF write-protect
> [ 0.000000] E4000-EBFFF write-through
> [ 0.000000] EC000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 1C0000000 mask FC0000000 uncachable
> [ 0.000000] 1 base 000000000 mask E00000000 write-back
> [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
> [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
> [ 0.000000] found SMP MP-table at [c00ff780] ff780
> [ 0.000000] initial memory mapped : 0 - 01c00000
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
> [ 0.000000] 0000000000 - 0000400000 page 4k
> [ 0.000000] 0000400000 - 0037400000 page 2M
> [ 0.000000] 0037400000 - 00377fe000 page 4k
> [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
> [ 0.000000] RAMDISK: 35d3e000 - 36e97000
> [ 0.000000] ACPI: RSDP 000fb9e0 00024 (v02 ACPIAM)
> [ 0.000000] ACPI: XSDT bf780100 00064 (v01 111610 XSDT1807 20101116 MSFT 00000097)
> [ 0.000000] ACPI: FACP bf780290 000F4 (v03 111610 FACP1807 20101116 MSFT 00000097)
> [ 0.000000] ACPI: DSDT bf7804b0 0B384 (v01 A1631 A1631001 00000001 INTL 20060113)
> [ 0.000000] ACPI: FACS bf798000 00040
> [ 0.000000] ACPI: APIC bf780390 000D8 (v01 111610 APIC1807 20101116 MSFT 00000097)
> [ 0.000000] ACPI: MCFG bf780470 0003C (v01 111610 OEMMCFG 20101116 MSFT 00000097)
> [ 0.000000] ACPI: OEMB bf798040 00072 (v01 111610 OEMB1807 20101116 MSFT 00000097)
> [ 0.000000] ACPI: HPET bf78f4b0 00038 (v01 111610 OEMHPET 20101116 MSFT 00000097)
> [ 0.000000] ACPI: ASPT bf798360 00034 (v06 111610 PerfTune 20101116 MSFT 00000097)
> [ 0.000000] ACPI: OSFR bf78f4f0 000B0 (v01 111610 OEMOSFR 20101116 MSFT 00000097)
> [ 0.000000] ACPI: SSDT bf79a7f0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 2175MB HIGHMEM available.
> [ 0.000000] 887MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 377fe000
> [ 0.000000] low ram: 0 - 377fe000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x000377fe
> [ 0.000000] HighMem 0x000377fe -> 0x000bf780
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009e
> [ 0.000000] 0: 0x00000100 -> 0x000bf780
> [ 0.000000] On node 0 totalpages: 784142
> [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f454e200
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1744 pages used for memmap
> [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 4352 pages used for memmap
> [ 0.000000] HighMem zone: 552578 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
> [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
> [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 64
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
> [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7000000 s28800 r0 d24448 u524288
> [ 0.000000] pcpu-alloc: s28800 r0 d24448 u524288 alloc=1*4194304
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778014
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=7fb37a7b-a136-4b7b-bcc1-2beee1e49fd6 ro quiet splash vt.handoff=7
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] allocated 15684800 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf780)
> [ 0.000000] Memory: 3068320k/3137024k available (5188k kernel code, 68248k reserved, 2540k data, 700k init, 2227720k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
> [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
> [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB)
> [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB)
> [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU-based detection of stalled CPUs is disabled.
> [ 0.000000] NR_IRQS:2304 nr_irqs:1152 16
> [ 0.000000] CPU 0 irqstacks, hard=f300a000 soft=f300c000
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] vt handoff: transparent VT on vt#7
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] hpet clockevent registered
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.004000] Detected 3207.005 MHz processor.
> [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6414.01 BogoMIPS (lpj=12828020)
> [ 0.000005] pid_max: default: 32768 minimum: 301
> [ 0.000020] Security Framework initialized
> [ 0.000029] AppArmor: AppArmor initialized
> [ 0.000030] Yama: becoming mindful.
> [ 0.000068] Mount-cache hash table entries: 512
> [ 0.000154] Initializing cgroup subsys ns
> [ 0.000157] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
> [ 0.000159] Initializing cgroup subsys cpuacct
> [ 0.000162] Initializing cgroup subsys memory
> [ 0.000168] Initializing cgroup subsys devices
> [ 0.000170] Initializing cgroup subsys freezer
> [ 0.000171] Initializing cgroup subsys net_cls
> [ 0.000172] Initializing cgroup subsys blkio
> [ 0.000194] CPU: Physical Processor ID: 0
> [ 0.000195] CPU: Processor Core ID: 0
> [ 0.000199] mce: CPU supports 9 MCE banks
> [ 0.000210] CPU0: Thermal monitoring enabled (TM1)
> [ 0.000217] using mwait in idle threads.
> [ 0.001962] ACPI: Core revision 20110112
> [ 0.030462] ftrace: allocating 23640 entries in 47 pages
> [ 0.036221] Enabling APIC mode: Flat. Using 2 I/O APICs
> [ 0.036635] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.076281] CPU0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz stepping 05
> [ 0.181091] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
> [ 0.181096] ... version: 3
> [ 0.181097] ... bit width: 48
> [ 0.181098] ... generic registers: 4
> [ 0.181099] ... value mask: 0000ffffffffffff
> [ 0.181100] ... max period: 000000007fffffff
> [ 0.181101] ... fixed-purpose events: 3
> [ 0.181102] ... event mask: 000000070000000f
> [ 0.181414] CPU 1 irqstacks, hard=f30ce000 soft=f30d8000
> [ 0.181416] Booting Node 0, Processors #1
> [ 0.191665] Initializing CPU#1
> [ 0.289109] CPU 2 irqstacks, hard=f30e2000 soft=f30e4000
> [ 0.289112] #2
> [ 0.299240] Initializing CPU#2
> [ 0.397052] CPU 3 irqstacks, hard=f30ee000 soft=f30f4000
> [ 0.397054] #3
> [ 0.407282] Initializing CPU#3
> [ 0.504902] CPU 4 irqstacks, hard=f3106000 soft=f3108000
> [ 0.504906] #4
> [ 0.515029] Initializing CPU#4
> [ 0.612864] CPU 5 irqstacks, hard=f3144000 soft=f3146000
> [ 0.612867] #5
> [ 0.623086] Initializing CPU#5
> [ 0.720765] CPU 6 irqstacks, hard=f3158000 soft=f315a000
> [ 0.720768] #6
> [ 0.730985] Initializing CPU#6
> [ 0.828659] CPU 7 irqstacks, hard=f3164000 soft=f3166000
> [ 0.828662] #7 Ok.
> [ 0.838779] Initializing CPU#7
> [ 0.936515] Brought up 8 CPUs
> [ 0.936517] Total of 8 processors activated (51313.20 BogoMIPS).
> [ 0.939773] devtmpfs: initialized
> [ 0.940588] print_constraints: dummy:
> [ 0.940609] Time: 5:13:57 Date: 05/03/11
> [ 0.940635] NET: Registered protocol family 16
> [ 0.940696] Trying to unpack rootfs image as initramfs...
> [ 0.940697] EISA bus registered
> [ 0.940702] ACPI: bus type pci registered
> [ 0.940747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.940749] PCI: not using MMCONFIG
> [ 0.940829] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
> [ 0.940830] PCI: Using configuration type 1 for base access
> [ 0.941397] bio: create slab <bio-0> at 0
> [ 0.942404] ACPI: EC: Look up EC in DSDT
> [ 0.943322] ACPI: Executed 1 blocks of module-level executable AML code
> [ 1.000398] ACPI: SSDT bf7983a0 0244C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
> [ 1.000720] ACPI: Dynamic OEM Table Load:
> [ 1.000722] ACPI: SSDT (null) 0244C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
> [ 1.000891] ACPI: Interpreter enabled
> [ 1.000896] ACPI: (supports S0 S1 S3 S4 S5)
> [ 1.000911] ACPI: Using IOAPIC for interrupt routing
> [ 1.000929] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 1.001744] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> [ 1.001746] PCI: Using MMCONFIG for extended config space
> [ 1.008705] ACPI: No dock devices found.
> [ 1.008707] HEST: Table not found.
> [ 1.008709] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 1.008768] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 1.008886] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
> [ 1.008887] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
> [ 1.008889] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
> [ 1.008890] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
> [ 1.008892] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
> [ 1.008893] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
> [ 1.008906] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
> [ 1.008941] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> [ 1.008944] pci 0000:00:00.0: PME# disabled
> [ 1.008960] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
> [ 1.008995] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 1.008997] pci 0000:00:01.0: PME# disabled
> [ 1.009012] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604
> [ 1.009047] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> [ 1.009049] pci 0000:00:02.0: PME# disabled
> [ 1.009064] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
> [ 1.009098] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 1.009100] pci 0000:00:03.0: PME# disabled
> [ 1.009118] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
> [ 1.009152] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 1.009154] pci 0000:00:07.0: PME# disabled
> [ 1.009174] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
> [ 1.009221] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
> [ 1.009267] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
> [ 1.009311] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
> [ 1.009358] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
> [ 1.009395] pci 0000:00:1a.0: reg 20: [io 0xa800-0xa81f]
> [ 1.009431] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
> [ 1.009467] pci 0000:00:1a.1: reg 20: [io 0xa880-0xa89f]
> [ 1.009503] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
> [ 1.009539] pci 0000:00:1a.2: reg 20: [io 0xac00-0xac1f]
> [ 1.009584] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
> [ 1.009602] pci 0000:00:1a.7: reg 10: [mem 0xf9dff000-0xf9dff3ff]
> [ 1.009665] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 1.009668] pci 0000:00:1a.7: PME# disabled
> [ 1.009687] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
> [ 1.009699] pci 0000:00:1b.0: reg 10: [mem 0xf9df8000-0xf9dfbfff 64bit]
> [ 1.009744] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 1.009747] pci 0000:00:1b.0: PME# disabled
> [ 1.009762] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
> [ 1.009808] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 1.009811] pci 0000:00:1c.0: PME# disabled
> [ 1.009828] pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
> [ 1.009874] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 1.009877] pci 0000:00:1c.2: PME# disabled
> [ 1.009898] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
> [ 1.009934] pci 0000:00:1d.0: reg 20: [io 0xa080-0xa09f]
> [ 1.009971] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
> [ 1.010007] pci 0000:00:1d.1: reg 20: [io 0xa400-0xa41f]
> [ 1.010043] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
> [ 1.010079] pci 0000:00:1d.2: reg 20: [io 0xa480-0xa49f]
> [ 1.010123] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
> [ 1.010141] pci 0000:00:1d.7: reg 10: [mem 0xf9dfe000-0xf9dfe3ff]
> [ 1.010203] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 1.010207] pci 0000:00:1d.7: PME# disabled
> [ 1.010222] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
> [ 1.010268] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
> [ 1.010340] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
> [ 1.010374] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
> [ 1.010390] pci 0000:00:1f.2: reg 10: [io 0x9c00-0x9c07]
> [ 1.010396] pci 0000:00:1f.2: reg 14: [io 0x9880-0x9883]
> [ 1.010402] pci 0000:00:1f.2: reg 18: [io 0x9800-0x9807]
> [ 1.010409] pci 0000:00:1f.2: reg 1c: [io 0x9480-0x9483]
> [ 1.010415] pci 0000:00:1f.2: reg 20: [io 0x9400-0x941f]
> [ 1.010421] pci 0000:00:1f.2: reg 24: [mem 0xf9dfc000-0xf9dfc7ff]
> [ 1.010449] pci 0000:00:1f.2: PME# supported from D3hot
> [ 1.010451] pci 0000:00:1f.2: PME# disabled
> [ 1.010464] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
> [ 1.010477] pci 0000:00:1f.3: reg 10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
> [ 1.010494] pci 0000:00:1f.3: reg 20: [io 0x1000-0x101f]
> [ 1.010549] pci 0000:01:00.0: [1b4b:9123] type 0 class 0x000106
> [ 1.010557] pci 0000:01:00.0: reg 10: [io 0xbc00-0xbc07]
> [ 1.010563] pci 0000:01:00.0: reg 14: [io 0xb880-0xb883]
> [ 1.010570] pci 0000:01:00.0: reg 18: [io 0xb800-0xb807]
> [ 1.010576] pci 0000:01:00.0: reg 1c: [io 0xb480-0xb483]
> [ 1.010582] pci 0000:01:00.0: reg 20: [io 0xb400-0xb40f]
> [ 1.010588] pci 0000:01:00.0: reg 24: [mem 0xf9eff800-0xf9efffff]
> [ 1.010595] pci 0000:01:00.0: reg 30: [mem 0xf9ee0000-0xf9eeffff pref]
> [ 1.010611] pci 0000:01:00.0: PME# supported from D3hot
> [ 1.010614] pci 0000:01:00.0: PME# disabled
> [ 1.016329] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 1.016332] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
> [ 1.016335] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
> [ 1.016338] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.016378] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
> [ 1.016392] pci 0000:02:00.0: reg 10: [mem 0xf9ffe000-0xf9ffffff 64bit]
> [ 1.016449] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 1.016452] pci 0000:02:00.0: PME# disabled
> [ 1.024321] pci 0000:00:02.0: PCI bridge to [bus 02-02]
> [ 1.024324] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.024326] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
> [ 1.024330] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.024365] pci 0000:03:00.0: [10de:0de1] type 0 class 0x000300
> [ 1.024374] pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
> [ 1.024383] pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
> [ 1.024391] pci 0000:03:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
> [ 1.024398] pci 0000:03:00.0: reg 24: [io 0xcc00-0xcc7f]
> [ 1.024404] pci 0000:03:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
> [ 1.024441] pci 0000:03:00.1: [10de:0bea] type 0 class 0x000403
> [ 1.024449] pci 0000:03:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
> [ 1.032315] pci 0000:00:03.0: PCI bridge to [bus 03-03]
> [ 1.032318] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
> [ 1.032320] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
> [ 1.032324] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 1.032353] pci 0000:00:07.0: PCI bridge to [bus 04-04]
> [ 1.032355] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.032358] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> [ 1.032362] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.032394] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
> [ 1.032397] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.032400] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> [ 1.032405] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 1.032457] pci 0000:05:00.0: [11ab:4364] type 0 class 0x000200
> [ 1.032477] pci 0000:05:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
> [ 1.032488] pci 0000:05:00.0: reg 18: [io 0xd800-0xd8ff]
> [ 1.032526] pci 0000:05:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
> [ 1.032562] pci 0000:05:00.0: supports D1 D2
> [ 1.032563] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 1.032567] pci 0000:05:00.0: PME# disabled
> [ 1.040313] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
> [ 1.040316] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
> [ 1.040319] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
> [ 1.040323] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.040353] pci 0000:07:02.0: [1106:3044] type 0 class 0x000c00
> [ 1.040368] pci 0000:07:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
> [ 1.040377] pci 0000:07:02.0: reg 14: [io 0xec00-0xec7f]
> [ 1.040431] pci 0000:07:02.0: supports D2
> [ 1.040432] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
> [ 1.040436] pci 0000:07:02.0: PME# disabled
> [ 1.040472] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
> [ 1.040475] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> [ 1.040478] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> [ 1.040482] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.040484] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 1.040485] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 1.040487] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 1.040488] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
> [ 1.040490] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
> [ 1.040491] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
> [ 1.040512] pci_bus 0000:00: on NUMA node 0
> [ 1.040516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 1.040752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [ 1.040815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> [ 1.040841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [ 1.040870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
> [ 1.040893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
> [ 1.040916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
> [ 1.040939] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
> [ 1.040968] pci0000:00: Requesting ACPI _OSC control (0x1d)
> [ 1.049308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
> [ 1.049340] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
> [ 1.049370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 1.049400] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
> [ 1.049430] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
> [ 1.049461] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
> [ 1.049490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
> [ 1.049520] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 1.049585] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 1.049588] vgaarb: loaded
> [ 1.049709] SCSI subsystem initialized
> [ 1.049743] libata version 3.00 loaded.
> [ 1.049771] usbcore: registered new interface driver usbfs
> [ 1.049778] usbcore: registered new interface driver hub
> [ 1.049793] usbcore: registered new device driver usb
> [ 1.049876] wmi: Mapper loaded
> [ 1.049877] PCI: Using ACPI for IRQ routing
> [ 1.049879] PCI: pci_cache_line_size set to 64 bytes
> [ 1.049951] reserve RAM buffer: 000000000009e400 - 000000000009ffff
> [ 1.049953] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
> [ 1.050014] NetLabel: Initializing
> [ 1.050015] NetLabel: domain hash size = 128
> [ 1.050016] NetLabel: protocols = UNLABELED CIPSOv4
> [ 1.050022] NetLabel: unlabeled traffic allowed by default
> [ 1.050043] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> [ 1.050047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 1.050050] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> [ 1.072415] Switching to clocksource hpet
> [ 1.076272] Switched to NOHz mode on CPU #0
> [ 1.076311] Switched to NOHz mode on CPU #3
> [ 1.076326] Switched to NOHz mode on CPU #1
> [ 1.076367] Switched to NOHz mode on CPU #2
> [ 1.076383] Switched to NOHz mode on CPU #6
> [ 1.076387] Switched to NOHz mode on CPU #4
> [ 1.076388] Switched to NOHz mode on CPU #7
> [ 1.076391] Switched to NOHz mode on CPU #5
> [ 1.076879] AppArmor: AppArmor Filesystem Enabled
> [ 1.076895] pnp: PnP ACPI init
> [ 1.076907] ACPI: bus type pnp registered
> [ 1.076984] pnp 00:00: [bus 00-ff]
> [ 1.076986] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 1.076987] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 1.076988] pnp 00:00: [io 0x0d00-0xffff window]
> [ 1.076990] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 1.076991] pnp 00:00: [mem 0x000d0000-0x000dffff window]
> [ 1.076993] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
> [ 1.076994] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
> [ 1.077035] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> [ 1.077042] pnp 00:01: [mem 0xfbf00000-0xfbffffff]
> [ 1.077043] pnp 00:01: [mem 0xfc000000-0xfcffffff]
> [ 1.077044] pnp 00:01: [mem 0xfd000000-0xfdffffff]
> [ 1.077046] pnp 00:01: [mem 0xfe000000-0xfebfffff]
> [ 1.077047] pnp 00:01: [mem 0xfec8a000-0xfec8afff]
> [ 1.077048] pnp 00:01: [mem 0xfed10000-0xfed10fff]
> [ 1.077083] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
> [ 1.077085] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
> [ 1.077086] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
> [ 1.077088] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
> [ 1.077090] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
> [ 1.077091] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
> [ 1.077093] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 1.077119] pnp 00:02: [dma 4]
> [ 1.077120] pnp 00:02: [io 0x0000-0x000f]
> [ 1.077122] pnp 00:02: [io 0x0081-0x0083]
> [ 1.077123] pnp 00:02: [io 0x0087]
> [ 1.077124] pnp 00:02: [io 0x0089-0x008b]
> [ 1.077126] pnp 00:02: [io 0x008f]
> [ 1.077127] pnp 00:02: [io 0x00c0-0x00df]
> [ 1.077147] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 1.077153] pnp 00:03: [io 0x0070-0x0071]
> [ 1.077160] pnp 00:03: [irq 8]
> [ 1.077178] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 1.077183] pnp 00:04: [io 0x0061]
> [ 1.077202] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 1.077207] pnp 00:05: [io 0x00f0-0x00ff]
> [ 1.077211] pnp 00:05: [irq 13]
> [ 1.077229] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 1.077349] pnp 00:06: [io 0x0000-0xffffffff disabled]
> [ 1.077351] pnp 00:06: [io 0x0000-0xffffffff disabled]
> [ 1.077352] pnp 00:06: [io 0x0290-0x029f]
> [ 1.077387] system 00:06: [io 0x0290-0x029f] has been reserved
> [ 1.077389] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.077498] pnp 00:07: [io 0x0010-0x001f]
> [ 1.077499] pnp 00:07: [io 0x0022-0x003f]
> [ 1.077500] pnp 00:07: [io 0x0044-0x004d]
> [ 1.077501] pnp 00:07: [io 0x0050-0x005f]
> [ 1.077502] pnp 00:07: [io 0x0062-0x0063]
> [ 1.077504] pnp 00:07: [io 0x0065-0x006f]
> [ 1.077505] pnp 00:07: [io 0x0072-0x007f]
> [ 1.077506] pnp 00:07: [io 0x0080]
> [ 1.077507] pnp 00:07: [io 0x0084-0x0086]
> [ 1.077508] pnp 00:07: [io 0x0088]
> [ 1.077509] pnp 00:07: [io 0x008c-0x008e]
> [ 1.077510] pnp 00:07: [io 0x0090-0x009f]
> [ 1.077511] pnp 00:07: [io 0x00a2-0x00bf]
> [ 1.077513] pnp 00:07: [io 0x00e0-0x00ef]
> [ 1.077514] pnp 00:07: [io 0x04d0-0x04d1]
> [ 1.077515] pnp 00:07: [io 0x0800-0x087f]
> [ 1.077516] pnp 00:07: [io 0x1000-0x0fff disabled]
> [ 1.077517] pnp 00:07: [io 0x0500-0x057f]
> [ 1.077519] pnp 00:07: [io 0x0600-0x0607]
> [ 1.077520] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
> [ 1.077521] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
> [ 1.077522] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
> [ 1.077575] system 00:07: [io 0x04d0-0x04d1] has been reserved
> [ 1.077576] system 00:07: [io 0x0800-0x087f] has been reserved
> [ 1.077578] system 00:07: [io 0x0500-0x057f] has been reserved
> [ 1.077580] system 00:07: [io 0x0600-0x0607] has been reserved
> [ 1.077581] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 1.077583] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 1.077585] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
> [ 1.077587] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.077629] pnp 00:08: [mem 0xfed00000-0xfed003ff]
> [ 1.077650] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 1.077681] pnp 00:09: [mem 0xffa00000-0xffbfffff]
> [ 1.077683] pnp 00:09: [mem 0xffe00000-0xffffffff]
> [ 1.077706] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
> [ 1.077732] pnp 00:0a: [mem 0xffc00000-0xffdfffff]
> [ 1.077766] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
> [ 1.077767] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.077819] pnp 00:0b: [io 0x0060]
> [ 1.077820] pnp 00:0b: [io 0x0064]
> [ 1.077821] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
> [ 1.077822] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
> [ 1.077857] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 1.077859] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 1.077861] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.077902] pnp 00:0c: [mem 0xe0000000-0xefffffff]
> [ 1.077936] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
> [ 1.077938] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.078039] pnp 00:0d: [mem 0x00000000-0x0009ffff]
> [ 1.078041] pnp 00:0d: [mem 0x000c0000-0x000cffff]
> [ 1.078042] pnp 00:0d: [mem 0x000e0000-0x000fffff]
> [ 1.078043] pnp 00:0d: [mem 0x00100000-0xbfffffff]
> [ 1.078044] pnp 00:0d: [mem 0xfed90000-0xffffffff]
> [ 1.078087] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 1.078089] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
> [ 1.078090] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
> [ 1.078092] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
> [ 1.078094] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
> [ 1.078096] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 1.078182] pnp: PnP ACPI: found 14 devices
> [ 1.078183] ACPI: ACPI bus type pnp unregistered
> [ 1.078185] PnPBIOS: Disabled by ACPI PNP
> [ 1.113783] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
> [ 1.113786] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 1.113789] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
> [ 1.113790] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 1.113792] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
> [ 1.113795] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
> [ 1.113798] pci 0000:00:01.0: bridge window [mem pref disabled]
> [ 1.113801] pci 0000:00:02.0: PCI bridge to [bus 02-02]
> [ 1.113803] pci 0000:00:02.0: bridge window [io disabled]
> [ 1.113806] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
> [ 1.113808] pci 0000:00:02.0: bridge window [mem pref disabled]
> [ 1.113812] pci 0000:00:03.0: PCI bridge to [bus 03-03]
> [ 1.113813] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
> [ 1.113816] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
> [ 1.113819] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 1.113823] pci 0000:00:07.0: PCI bridge to [bus 04-04]
> [ 1.113824] pci 0000:00:07.0: bridge window [io disabled]
> [ 1.113827] pci 0000:00:07.0: bridge window [mem disabled]
> [ 1.113829] pci 0000:00:07.0: bridge window [mem pref disabled]
> [ 1.113832] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
> [ 1.113834] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
> [ 1.113838] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
> [ 1.113841] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 1.113845] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
> [ 1.113847] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
> [ 1.113851] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
> [ 1.113854] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 1.113859] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
> [ 1.113861] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> [ 1.113864] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> [ 1.113867] pci 0000:00:1e.0: bridge window [mem pref disabled]
> [ 1.113876] pci 0000:00:01.0: setting latency timer to 64
> [ 1.113880] pci 0000:00:02.0: setting latency timer to 64
> [ 1.113885] pci 0000:00:03.0: setting latency timer to 64
> [ 1.113889] pci 0000:00:07.0: setting latency timer to 64
> [ 1.113893] pci 0000:00:1c.0: enabling device (0106 -> 0107)
> [ 1.113904] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 1.113906] pci 0000:00:1c.0: setting latency timer to 64
> [ 1.113914] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.113916] pci 0000:00:1c.2: setting latency timer to 64
> [ 1.113921] pci 0000:00:1e.0: setting latency timer to 64
> [ 1.113924] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 1.113925] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 1.113927] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.113928] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
> [ 1.113930] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
> [ 1.113931] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
> [ 1.113933] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
> [ 1.113934] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
> [ 1.113935] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
> [ 1.113937] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
> [ 1.113938] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
> [ 1.113940] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 1.113941] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
> [ 1.113943] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
> [ 1.113944] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 1.113946] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> [ 1.113947] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
> [ 1.113949] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 1.113950] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
> [ 1.113952] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
> [ 1.113953] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
> [ 1.113954] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
> [ 1.113956] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.113957] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
> [ 1.113958] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
> [ 1.113960] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
> [ 1.113982] NET: Registered protocol family 2
> [ 1.114022] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 1.114136] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 1.114316] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 1.114391] TCP: Hash tables configured (established 131072 bind 65536)
> [ 1.114392] TCP reno registered
> [ 1.114394] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 1.114397] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 1.114448] NET: Registered protocol family 1
> [ 1.114592] pci 0000:03:00.0: Boot video device
> [ 1.114604] PCI: CLS 256 bytes, default 64
> [ 1.114917] cpufreq-nforce2: No nForce2 chipset.
> [ 1.115030] audit: initializing netlink socket (disabled)
> [ 1.115035] type=2000 audit(1304399636.872:1): initialized
> [ 1.121504] highmem bounce pool size: 64 pages
> [ 1.121507] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 1.122572] VFS: Disk quotas dquot_6.5.2
> [ 1.122609] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 1.123008] fuse init (API version 7.16)
> [ 1.123064] msgmni has been set to 1641
> [ 1.123206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 1.123223] io scheduler noop registered
> [ 1.123225] io scheduler deadline registered
> [ 1.123234] io scheduler cfq registered (default)
> [ 1.123399] pcieport 0000:00:1c.0: setting latency timer to 64
> [ 1.123431] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
> [ 1.123477] pcieport 0000:00:1c.2: setting latency timer to 64
> [ 1.123507] pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
> [ 1.123563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.123577] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 1.123615] intel_idle: MWAIT substates: 0x1120
> [ 1.123625] intel_idle: v0.4 model 0x1A
> [ 1.123626] intel_idle: lapic_timer_reliable_states 0x2
> [ 1.123710] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> [ 1.123713] ACPI: Power Button [PWRB]
> [ 1.123741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 1.123743] ACPI: Power Button [PWRF]
> [ 1.123876] ACPI: acpi_idle yielding to intel_idle
> [ 1.124939] ERST: Table is not found!
> [ 1.124977] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 1.124983] isapnp: Scanning for PnP cards...
> [ 1.242031] Freeing initrd memory: 17764k freed
> [ 1.477666] isapnp: No Plug & Play device found
> [ 1.481431] Linux agpgart interface v0.103
> [ 1.482229] brd: module loaded
> [ 1.482587] loop: module loaded
> [ 1.482639] i2c-core: driver [adp5520] using legacy suspend method
> [ 1.482640] i2c-core: driver [adp5520] using legacy resume method
> [ 1.482901] Fixed MDIO Bus: probed
> [ 1.482922] PPP generic driver version 2.4.2
> [ 1.482945] tun: Universal TUN/TAP device driver, 1.6
> [ 1.482946] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
> [ 1.482995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.483008] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.483016] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 1.483018] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 1.483040] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 1.483073] ehci_hcd 0000:00:1a.7: debug port 1
> [ 1.486953] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
> [ 1.486967] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9dff000
> [ 1.500202] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 1.500299] hub 1-0:1.0: USB hub found
> [ 1.500302] hub 1-0:1.0: 6 ports detected
> [ 1.500359] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.500366] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 1.500368] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 1.500391] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 1.500424] ehci_hcd 0000:00:1d.7: debug port 1
> [ 1.504303] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
> [ 1.504312] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9dfe000
> [ 1.520184] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 1.520277] hub 2-0:1.0: USB hub found
> [ 1.520279] hub 2-0:1.0: 6 ports detected
> [ 1.520328] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.520336] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.520353] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.520357] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 1.520359] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 1.520382] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 1.520421] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
> [ 1.520499] hub 3-0:1.0: USB hub found
> [ 1.520503] hub 3-0:1.0: 2 ports detected
> [ 1.520551] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 1.520555] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 1.520557] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 1.520581] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 1.520618] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
> [ 1.520695] hub 4-0:1.0: USB hub found
> [ 1.520697] hub 4-0:1.0: 2 ports detected
> [ 1.520745] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 1.520749] uhci_hcd 0000:00:1a.2: setting latency timer to 64
> [ 1.520751] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 1.520773] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> [ 1.524224] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
> [ 1.524307] hub 5-0:1.0: USB hub found
> [ 1.524310] hub 5-0:1.0: 2 ports detected
> [ 1.524353] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.524357] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 1.524359] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 1.524383] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> [ 1.524414] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
> [ 1.524497] hub 6-0:1.0: USB hub found
> [ 1.524500] hub 6-0:1.0: 2 ports detected
> [ 1.524542] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.524546] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 1.524548] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 1.524569] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> [ 1.524600] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
> [ 1.524674] hub 7-0:1.0: USB hub found
> [ 1.524677] hub 7-0:1.0: 2 ports detected
> [ 1.524718] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.524722] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 1.524724] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 1.524750] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> [ 1.524780] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
> [ 1.524857] hub 8-0:1.0: USB hub found
> [ 1.524859] hub 8-0:1.0: 2 ports detected
> [ 1.524936] i8042: PNP: No PS/2 controller found. Probing ports directly.
> [ 1.527719] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.527727] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.527784] mousedev: PS/2 mouse device common for all mice
> [ 1.527858] rtc_cmos 00:03: RTC can wake from S4
> [ 1.527937] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [ 1.527959] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 1.528010] device-mapper: uevent: version 1.0.3
> [ 1.528058] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel at redhat.com
> [ 1.528099] device-mapper: multipath: version 1.2.0 loaded
> [ 1.528101] device-mapper: multipath round-robin: version 1.0.0 loaded
> [ 1.528142] EISA: Probing bus 0 at eisa.0
> [ 1.528143] EISA: Cannot allocate resource for mainboard
> [ 1.528144] Cannot allocate resource for EISA slot 1
> [ 1.528145] Cannot allocate resource for EISA slot 2
> [ 1.528146] Cannot allocate resource for EISA slot 3
> [ 1.528147] Cannot allocate resource for EISA slot 4
> [ 1.528148] Cannot allocate resource for EISA slot 5
> [ 1.528149] Cannot allocate resource for EISA slot 6
> [ 1.528150] Cannot allocate resource for EISA slot 7
> [ 1.528151] Cannot allocate resource for EISA slot 8
> [ 1.528152] EISA: Detected 0 cards.
> [ 1.528317] cpuidle: using governor ladder
> [ 1.528525] cpuidle: using governor menu
> [ 1.528685] TCP cubic registered
> [ 1.528764] NET: Registered protocol family 10
> [ 1.529092] NET: Registered protocol family 17
> [ 1.529100] Registering the dns_resolver key type
> [ 1.533190] Using IPI No-Shortcut mode
> [ 1.533261] PM: Hibernation image not present or could not be loaded.
> [ 1.533268] registered taskstats version 1
> [ 1.533538] Magic number: 11:911:212
> [ 1.533699] rtc_cmos 00:03: setting system clock to 2011-05-03 05:13:58 UTC (1304399638)
> [ 1.533709] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.533710] EDD information not available.
> [ 1.533862] Freeing unused kernel memory: 700k freed
> [ 1.534043] Write protecting the kernel text: 5192k
> [ 1.534280] Write protecting the kernel read-only data: 2148k
> [ 1.554255] <30>udev[90]: starting version 167
> [ 1.580171] ahci 0000:00:1f.2: version 3.0
> [ 1.580188] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
> [ 1.580218] ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
> [ 1.580241] ahci: SSS flag set, parallel bus scan disabled
> [ 1.580276] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
> [ 1.580279] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
> [ 1.580283] ahci 0000:00:1f.2: setting latency timer to 64
> [ 1.585284] sky2: driver version 1.28
> [ 1.585304] sky2 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 1.585312] sky2 0000:05:00.0: setting latency timer to 64
> [ 1.585330] sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3
> [ 1.585422] sky2 0000:05:00.0: irq 67 for MSI/MSI-X
> [ 1.585928] sky2 0000:05:00.0: eth0: addr bc:ae:c5:01:14:f2
> [ 1.587634] firewire_ohci 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 1.628637] scsi0 : ahci
> [ 1.628864] scsi1 : ahci
> [ 1.629059] scsi2 : ahci
> [ 1.629253] scsi3 : ahci
> [ 1.629400] scsi4 : ahci
> [ 1.629526] scsi5 : ahci
> [ 1.629702] ata1: SATA max UDMA/133 abar m2048 at 0xf9dfc000 port 0xf9dfc100 irq 66
> [ 1.629705] ata2: SATA max UDMA/133 abar m2048 at 0xf9dfc000 port 0xf9dfc180 irq 66
> [ 1.629706] ata3: SATA max UDMA/133 abar m2048 at 0xf9dfc000 port 0xf9dfc200 irq 66
> [ 1.629708] ata4: SATA max UDMA/133 abar m2048 at 0xf9dfc000 port 0xf9dfc280 irq 66
> [ 1.629710] ata5: SATA max UDMA/133 abar m2048 at 0xf9dfc000 port 0xf9dfc300 irq 66
> [ 1.629712] ata6: SATA max UDMA/133 abar m2048 at 0xf9dfc000 port 0xf9dfc380 irq 66
> [ 1.629734] ahci 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
> [ 1.629763] ahci 0000:01:00.0: irq 68 for MSI/MSI-X
> [ 1.629770] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
> [ 1.644254] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
> [ 1.644259] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
> [ 1.644264] ahci 0000:01:00.0: setting latency timer to 64
> [ 1.644942] scsi6 : ahci
> [ 1.645058] scsi7 : ahci
> [ 1.645258] scsi8 : ahci
> [ 1.645449] scsi9 : ahci
> [ 1.645607] scsi10 : ahci
> [ 1.645726] scsi11 : ahci
> [ 1.645843] scsi12 : ahci
> [ 1.645966] scsi13 : ahci
> [ 1.646034] ata7: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9eff900 irq 68
> [ 1.646038] ata8: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9eff980 irq 68
> [ 1.646041] ata9: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9effa00 irq 68
> [ 1.646044] ata10: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9effa80 irq 68
> [ 1.646047] ata11: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9effb00 irq 68
> [ 1.646051] ata12: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9effb80 irq 68
> [ 1.646054] ata13: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9effc00 irq 68
> [ 1.646057] ata14: SATA max UDMA/133 abar m2048 at 0xf9eff800 port 0xf9effc80 irq 68
> [ 1.652231] firewire_ohci: Added fw-ohci device 0000:07:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
> [ 1.947924] ata1: SATA link down (SStatus 0 SControl 300)
> [ 1.963944] ata7: SATA link down (SStatus 0 SControl 300)
> [ 1.963964] ata13: SATA link down (SStatus 0 SControl 300)
> [ 1.963987] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.964004] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 1.964016] ata10: SATA link down (SStatus 0 SControl 300)
> [ 1.964031] ata9: SATA link down (SStatus 0 SControl 300)
> [ 1.964058] ata11: SATA link down (SStatus 0 SControl 300)
> [ 1.964075] ata12: SATA link down (SStatus 0 SControl 300)
> [ 1.964084] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
> [ 1.964316] ata14.00: configured for UDMA/66
> [ 1.965279] ata8.00: ATA-8: ST31000524AS, JC45, max UDMA/133
> [ 1.965284] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.966742] ata8.00: configured for UDMA/133
> [ 2.015874] usb 7-2: new low speed USB device using uhci_hcd and address 2
> [ 2.111788] Refined TSC clocksource calibration: 3207.272 MHz.
> [ 2.111793] Switching to clocksource tsc
> [ 2.151830] firewire_core: created device fw0: GUID 001fc60000057c4d, S400
> [ 2.254523] usbcore: registered new interface driver usbhid
> [ 2.254525] usbhid: USB HID core driver
> [ 2.267650] ata2: SATA link down (SStatus 0 SControl 300)
> [ 2.587380] ata3: SATA link down (SStatus 0 SControl 300)
> [ 2.907099] ata4: SATA link down (SStatus 0 SControl 300)
> [ 3.226827] ata5: SATA link down (SStatus 0 SControl 300)
> [ 3.546554] ata6: SATA link down (SStatus 0 SControl 300)
> [ 3.546807] scsi 7:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
> [ 3.546979] sd 7:0:0:0: Attached scsi generic sg0 type 0
> [ 3.547005] sd 7:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 3.547059] sd 7:0:0:0: [sda] Write Protect is off
> [ 3.547061] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.547080] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.547258] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
> [ 3.547334] scsi 13:0:0:0: Attached scsi generic sg1 type 3
> [ 3.580182] sda: sda1 sda2 sda3 < sda5 > sda4
> [ 3.580634] sd 7:0:0:0: [sda] Attached SCSI disk
> [ 3.622541] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
> [ 3.622585] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
> [ 3.649849] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
> [ 3.650186] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
> [ 3.650270] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
> [ 4.122424] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
> [ 4.122426] EXT4-fs (sda2): write access will be enabled during recovery
> [ 4.260590] EXT4-fs (sda2): recovery complete
> [ 4.263462] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
> [ 10.384026] <30>udev[362]: starting version 167
> [ 10.391268] lp: driver loaded but no devices found
> [ 10.417059] EDAC MC: Ver: 2.1.0 Apr 11 2011
> [ 10.419931] Adding 11717628k swap on /dev/sda5. Priority:-1 extents:1 across:11717628k
> [ 10.420009] EDAC i7core: Driver loaded.
> [ 10.422923] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
> [ 10.422938] xhci_hcd 0000:02:00.0: setting latency timer to 64
> [ 10.422941] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [ 10.423005] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
> [ 10.427450] nvidia: module license 'NVIDIA' taints kernel.
> [ 10.427453] Disabling lock debugging due to kernel taint
> [ 10.656475] xhci_hcd 0000:02:00.0: irq 29, io mem 0xf9ffe000
> [ 10.656520] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
> [ 10.656525] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
> [ 10.656529] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
> [ 10.656533] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
> [ 10.656538] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
> [ 10.656541] xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
> [ 10.656546] xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
> [ 10.656549] xhci_hcd 0000:02:00.0: irq 76 for MSI/MSI-X
> [ 10.659832] usb usb9: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
> [ 10.659910] xHCI xhci_add_endpoint called for root hub
> [ 10.659911] xHCI xhci_check_bandwidth called for root hub
> [ 10.659940] hub 9-0:1.0: USB hub found
> [ 10.659943] hub 9-0:1.0: 4 ports detected
> [ 10.665956] <30>udev[384]: renamed network interface eth0 to eth1
> [ 10.682281] type=1400 audit(1304399647.653:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=563 comm="apparmor_parser"
> [ 10.682346] type=1400 audit(1304399647.653:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=547 comm="apparmor_parser"
> [ 10.682801] type=1400 audit(1304399647.653:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser"
> [ 10.682824] type=1400 audit(1304399647.653:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
> [ 10.683133] type=1400 audit(1304399647.653:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser"
> [ 10.683154] type=1400 audit(1304399647.653:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
> [ 10.712206] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 10.712245] HDA Intel 0000:00:1b.0: irq 77 for MSI/MSI-X
> [ 10.712264] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 10.736797] sky2 0000:05:00.0: eth1: enabling interface
> [ 10.736970] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 10.774455] hda_codec: ALC889: BIOS auto-probing.
> [ 10.781788] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
> [ 10.781884] HDA Intel 0000:03:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
> [ 10.781886] hda_intel: Disable MSI for Nvidia chipset
> [ 10.781911] HDA Intel 0000:03:00.1: setting latency timer to 64
> [ 10.984296] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
> [ 11.162758] RPC: Registered udp transport module.
> [ 11.162761] RPC: Registered tcp transport module.
> [ 11.162762] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 11.174778] FS-Cache: Loaded
> [ 11.193312] FS-Cache: Netfs 'nfs' registered for caching
> [ 11.295736] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
> [ 11.727850] nvidia 0000:03:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
> [ 11.727858] nvidia 0000:03:00.0: setting latency timer to 64
> [ 11.727862] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
> [ 11.727957] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06 Mon Apr 18 14:54:25 PDT 2011
> [ 11.776296] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
> [ 11.864630] vesafb: framebuffer at 0xd7000000, mapped to 0xfb880000, using 7552k, total 7552k
> [ 11.864633] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
> [ 11.864634] vesafb: scrolling: redraw
> [ 11.864635] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 11.864758] Console: switching to colour frame buffer device 200x75
> [ 12.090584] fb0: VESA VGA frame buffer device
> [ 12.108817] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
> [ 12.158043] type=1400 audit(1304399649.129:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=994 comm="apparmor_parser"
> [ 12.158496] type=1400 audit(1304399649.129:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=996 comm="apparmor_parser"
> [ 12.158572] type=1400 audit(1304399649.129:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=997 comm="apparmor_parser"
> [ 12.158581] type=1400 audit(1304399649.129:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=994 comm="apparmor_parser"
> [ 12.189397] ppdev: user-space parallel port driver
> [ 12.374102] svc: failed to register lockdv1 RPC service (errno 97).
> [ 12.374126] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 12.375823] ioremap error for 0xbf780000-0xbf781000, requested 0x10, got 0x0
> [ 12.389064] NFSD: starting 90-second grace period
> [ 12.863127] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
> [ 12.927184] EXT4-fs (sda1): re-mounted. Opts: commit=0
> [ 12.996126] EXT4-fs (sda4): re-mounted. Opts: commit=0
> [ 13.212142] sky2 0000:05:00.0: eth1: Link is up at 1000 Mbps, full duplex, flow control both
> [ 13.212243] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ 23.881041] eth1: no IPv6 routers present
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1209 / Virus Database: 1500/3610 - Release Date: 05/02/11
More information about the xorg
mailing list