tablet cursor configuration problem

kie27 xorg at hotsite.to
Fri Nov 5 05:26:49 PDT 2010


Hi,

I have been struggling to fix the problem listed below.
It was suggested on the #xorg irc that i post the question to this list.
Any help solving this would be most welcome,

cheers
kie


# HARDWARE LIST:
# 2 x dell U2311H 23" monitors
# Gigabyte Silent ATI HD5750 Graphics Card 1GB DDR5
# Wacom Graphire3 tablet CTE-430/S
#
# running dual screens in Xinerama mode using ATI's proprietary driver
# problem:
# while the mouse works fine, the tablet cursor moves from the left half of screen 0 to the right half of screen 1
# meaning I cannot visit the right half of screen 0 or the left half of screen 1 with the tablet
# same as this user: http://forums.debian.net/viewtopic.php?f=6&t=47855
#
# I have tried the following, but it seems to make no difference.
# option MMonitor "off"
#
# software versions:
# running debian squeeze amd64
# Linux lime 2.6.32-5-amd64 #1 SMP Sat Oct 30 14:18:21 UTC 2010 x86_64 GNU/Linux


#/etc/X11/xorg.conf
Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
	Screen         "amdcccle-Screen[3]-1" 1920 0
	Option         "Xinerama" "1"
EndSection

Section "ServerFlags"
	Option	    "Xinerama" "on"
EndSection

Section "InputDevice"
	Identifier  "stylus"
	Driver      "wacom"
	Option      "Device" "/dev/input/wacom"
	Option	    "Type" "stylus"
	Option      "ScreenNo" "0"
	Option	    "MMonitor" "on"
EndSection

Section "Monitor"
	Identifier  "aticonfig-Monitor[0]-0"
	Option      "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option      "DPMS" "true"
EndSection

Section "Monitor"
	Identifier  "0-DFP2"
	Option      "VendorName" "ATI Proprietary Driver"
#	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option      "ModelName" "DELL U2311H"
	Option	    "DPMS" "true"
	Option      "PreferredMode" "1920x1080"
	Option	    "TargetRefresh" "60"
	Option      "Position" "0 0"
	Option	    "Rotate" "normal"
	Option      "Disable" "false"
EndSection

Section "Monitor"
	Identifier   "0-DFP3"
	Option       "VendorName" "ATI Proprietary Driver"
#	Option	     "ModelName" "Generic Autodetecting Monitor"
	Option       "ModelName" "DELL U2311H"
	Option	     "DPMS" "true"
	Option       "PreferredMode" "1920x1080"
	Option	     "TargetRefresh" "60"
	Option       "Position" "0 0"
	Option	     "Rotate" "normal"
	Option       "Disable" "false"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	Option      "Monitor-DFP3" "0-DFP3"
	Option	    "XAANoOffscreenPixmaps" "true"
	BusID       "PCI:3:0:0"
EndSection

Section "Device"
	Identifier  "ATI"
	Driver      "fglrx"
	Option      "AddARGBGLXVisuals" "true"
	Option	    "XAANoOffscreenPixmaps" "true"
EndSection

Section "Device"
	Identifier  "amdcccle-Device[3]-1"
	Driver      "fglrx"
	Option      "Monitor-DFP2" "0-DFP2"
	Option	    "XAANoOffscreenPixmaps" "true"
	BusID       "PCI:3:0:0"
	Screen      1
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	DefaultDepth     24
	SubSection "Display"
	      Viewport   0 0
	      Depth     24
        EndSubSection
EndSection

Section "Screen"
	Identifier "amdcccle-Screen[3]-1"
	Device     "amdcccle-Device[3]-1"
	DefaultDepth     24
	SubSection "Display"
	   Viewport   0 0
  	   Depth     24
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" "enable"
EndSection




More information about the xorg mailing list