troobleshoot X on laptop
Morgan M.C.M-L
morgan-informatique at laposte.net
Wed Jan 6 12:52:43 PST 2010
>>
>>
>> ------------------------------------------------------------------------
>>
>> Sujet:
>> troobleshoot X on laptop
>> Expéditeur:
>> "Morgan M.C.M-L" <morgan-informatique at laposte.net>
>> Date:
>> Wed, 06 Jan 2010 19:17:08 +0100
>> Destinataire:
>> xorg at lists.freedesktop.org
>>
>> Destinataire:
>> xorg at lists.freedesktop.org
>>
>>
>> Hello
>>
>> I've been installing
>> NetBSD on a laptop Acer Inspire 1350 but I have some trooble with X.
>>
>> 1- 'X -configure' gave me a skeleton in '/root/xorg.conf.new'
>>
>> 2- I wrote in :
>>
>> HorizSync 31.5 - 48.0
>> VertRefresh 59.0 - 75.0
>> Modes "1024x768"
>>
>> 3- 'X -config /root/xorg.conf.new' gave me red/black vertical waves
>> and the lappy was frozen.
>>
>> 4- Changing driver 'Via' by 'Vesa' gave me red/black/blue vertical
>> waves and the lappy was frozen.
>>
>> 5- Trying lots of diferents 'Modes' and 'Refresh' have been the same.
>>
>> 6- xorgconfig gave me a file wich freeze with a black screen.
>>
>>
>>
>> So I think I will ?? Compile a new Xorg ?? Xfree ?? At least I need
>> little help. Here are some files 'Xorg.0.log, xorg.conf,
>> xorg.conf.xorgconfig, dmesg'
>>
>> ------------------------------------------------------------------------
>>
>> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
>> 2005,
>> 2006, 2007, 2008, 2009
>> The NetBSD Foundation, Inc. All rights reserved.
>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>> The Regents of the University of California. All rights reserved.
>>
>> NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 01:39:11 UTC 2009
>> builds at b8.netbsd.org:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
>>
>> total memory = 702 MB
>> avail memory = 678 MB
>> timecounter: Timecounters tick every 10.000 msec
>> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
>> Acer,Inc. Aspire 1350 (3A24)
>> mainbus0 (root)
>> cpu0 at mainbus0: AMD 686-class, 796MHz, id 0x6a0
>> cpu0: AMD Powernow! K7 Technology 1716 MHz
>> cpu0: frequencies available (Mhz): 1188 1320 1452 1584 1716
>> acpi0 at mainbus0: Intel ACPICA 20080321
>> acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
>> LNKA: ACPI: Found matching pin for 0.16.INTA at func 0: 0
>> LNKB: ACPI: Found matching pin for 0.16.INTB at func 1: 0
>> LNKC: ACPI: Found matching pin for 0.16.INTC at func 2: 0
>> LNKD: ACPI: Found matching pin for 0.16.INTD at func 3: 0
>> LNKA: ACPI: Found matching pin for 0.17.INTA at func 1: 0
>> LNKC: ACPI: Found matching pin for 0.17.INTC at func 5: 9
>> LNKA: ACPI: Found matching pin for 0.18.INTA at func 0: 4
>> LNKB: ACPI: Found matching pin for 0.7.INTA at func 0: 255
>> LNKB: ACPI: Found matching pin for 0.8.INTA at func 0: 5
>> acpi0: SCI interrupting at int 10
>> acpi0: fixed-feature power button present
>> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
>> ACPI-Fast 24-bit timer
>> acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
>> acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
>> npx1 at acpi0 (COPR, PNP0C04)
>> npx1: io 0xf0-0xff irq 13
>> npx1: reported by CPUID; using exception 16
>> attimer1 at acpi0 (TMR, PNP0100): AT Timer
>> attimer1: io 0x40-0x43 irq 0
>> pcppi1 at acpi0 (SPKR, PNP0800)
>> pcppi1: io 0x61
>> midi0 at pcppi1: PC speaker (CPU-intensive output)
>> sysbeep0 at pcppi1
>> pckbc1 at acpi0 (KBC0, PNP0303): kbd port
>> pckbc1: io 0x60,0x64 irq 1
>> pckbc2 at acpi0 (MSE0, PNP0F13): aux port
>> pckbc2: irq 12
>> LPTB (PNP0400) at acpi0 not configured
>> FDC (PNP0700) at acpi0 not configured
>> FIR (NSC6001) at acpi0 not configured
>> acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
>> acpiec0: io 0x62,0x66
>> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
>> acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
>> acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
>> acpitz0 at acpi0 (THRM): critical 87.0C passive 52.0C, passive cooling
>> apm0 at acpi0: Power Management spec V1.2
>> attimer1: attached to pcppi1
>> pckbd0 at pckbc1 (kbd slot)
>> pckbc1: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard
>> pms0 at pckbc1 (aux slot)
>> pms0: Synaptics touchpad version 5.8
>> pms0: Up/down buttons, Palm detect, Multi-finger
>> pckbc1: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pci0 at mainbus0 bus 0: configuration mode 1
>> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
>> pchb0 at pci0 dev 0 function 0
>> pchb0: vendor 0x1106 product 0x3205 (rev. 0x00)
>> agp0 at pchb0 (v3): aperture at 0xe0000000, size 0x10000000
>> ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb168 (rev. 0x00)
>> pci1 at ppb0 bus 1
>> pci1: i/o space, memory space enabled
>> vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x7205 (rev. 0x01)
>> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using
>> wskbd0
>> wsmux1: connecting to wsdisplay0
>> drm at vga1 not configured
>> cbb0 at pci0 dev 7 function 0: vendor 0x104c product 0xac50 (rev. 0x02)
>> fwohci0 at pci0 dev 8 function 0: vendor 0x104c product 0x8026 (rev.
>> 0x00)
>> fwohci0: interrupting at irq 5
>> fwohci0: OHCI version 1.10 (ROM=1)
>> fwohci0: No. of Isochronous channels is 4.
>> fwohci0: EUI64 00:c0:9f:00:00:15:96:b9
>> fwohci0: Phy 1394a available S400, 1 ports.
>> fwohci0: Link S400, max_rec 2048 bytes.
>> ieee1394if0 at fwohci0: IEEE1394 bus
>> fwip0 at ieee1394if0: IP over IEEE1394
>> fwohci0: Initiate bus reset
>> uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev.
>> 0x80)
>> uhci0: interrupting at irq 4
>> usb0 at uhci0: USB revision 1.0
>> uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev.
>> 0x80)
>> uhci1: interrupting at irq 5
>> usb1 at uhci1: USB revision 1.0
>> uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev.
>> 0x80)
>> uhci2: interrupting at irq 9
>> usb2 at uhci2: USB revision 1.0
>> ehci0 at pci0 dev 16 function 3: vendor 0x1106 product 0x3104 (rev.
>> 0x82)
>> ehci0: interrupting at irq 11
>> ehci0: dropped intr workaround enabled
>> ehci0: EHCI version 1.0
>> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
>> usb3 at ehci0: USB revision 2.0
>> pcib0 at pci0 dev 17 function 0
>> pcib0: vendor 0x1106 product 0x3177 (rev. 0x00)
>> viaide0 at pci0 dev 17 function 1
>> viaide0: VIA Technologies VT8235 ATA133 controller
>> viaide0: bus-master DMA support present
>> viaide0: primary channel configured to compatibility mode
>> viaide0: primary channel interrupting at irq 14
>> atabus0 at viaide0 channel 0
>> viaide0: secondary channel configured to compatibility mode
>> viaide0: secondary channel interrupting at irq 15
>> atabus1 at viaide0 channel 1
>> auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio
>> (rev 0x50)
>> auvia0: interrupting at irq 9
>> auvia0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18
>> bit ADC, Realtek 3D
>> auvia0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA>
>> audio0 at auvia0: full duplex, mmap, independent
>> vendor 0x1106 product 0x3068 (miscellaneous communications, revision
>> 0x80) at pci0 dev 17 function 6 not configured
>> vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
>> vr0: interrupting at irq 4
>> vr0: Ethernet address: 00:c0:9f:36:30:2c
>> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
>> ukphy0: OUI 0x0002c6, model 0x0032, rev. 8
>> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> cbb0: cacheline 0x0 lattimer 0x10
>> cbb0: bhlc 0x21000
>> cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
>> cbb0: interrupting at irq 5
>> cardslot0 at cbb0
>> pcmcia0 at cardslot0
>> isa0 at pcib0
>> lpt0 at isa0 port 0x378-0x37b irq 7
>> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
>> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
>> fwohci0: BUS reset
>> fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
>> ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>> ieee1394if0: bus manager 0 (me)
>> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
>> uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00,
>> addr 1
>> uhub0: 2 ports with 2 removable, self powered
>> uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00,
>> addr 1
>> uhub1: 2 ports with 2 removable, self powered
>> uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00,
>> addr 1
>> uhub2: 2 ports with 2 removable, self powered
>> uhub3 at usb3: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00,
>> addr 1
>> uhub3: 6 ports with 6 removable, self powered
>> acpiacad0: AC adapter online.
>> wd0 at atabus0 drive 0: <IBM-DBCA-206480>
>> wd0: drive supports 16-sector PIO transfers, LBA addressing
>> wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680
>> sectors
>> wd0: 32-bit data port
>> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
>> wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
>> (using DMA)
>> atapibus0 at atabus1: 2 targets
>> cd0 at atapibus0 drive 0: <Slimtype COMBO LSC-24082K, , JKQ1> cdrom
>> removable
>> cd0: 32-bit data port
>> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
>> cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
>> (using DMA)
>> Kernelized RAIDframe activated
>> pad0: outputs: 44100Hz, 16-bit, stereo
>> audio1 at pad0: half duplex
>> boot device: wd0
>> root on wd0a dumps on wd0b
>> root file system type: ffs
>> wsdisplay0: screen 1 added (80x25, vt100 emulation)
>> wsdisplay0: screen 2 added (80x25, vt100 emulation)
>> wsdisplay0: screen 3 added (80x25, vt100 emulation)
>> wsdisplay0: screen 4 added (80x25, vt100 emulation)
>>
>> ------------------------------------------------------------------------
>>
>>
>> X.Org X Server 1.4.2
>> Release Date: 11 June 2008
>> X Protocol Version 11, Revision 0
>> Build Operating System: NetBSD/i386 - Current Operating System:
>> NetBSD delphine-2. 5.0.1 NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30
>> 01:39:11 UTC 2009
>> builds at b8.netbsd.org:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
>> i386
>> Build Date: 11 June 2008 04:31:59PM
>>
>> Before reporting problems, check http://wiki.X.Org
>> to make sure that you have the latest version.
>> Module Loader present
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> (++) from command line, (!!) notice, (II) informational,
>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 5 23:12:25 2010
>> (++) Using config file: "xorg.conf.new"
>> (==) ServerLayout "X.org Configured"
>> (**) |-->Screen "Screen0" (0)
>> (**) | |-->Monitor "Monitor0"
>> (**) | |-->Device "Card0"
>> (**) |-->Input Device "Mouse0"
>> (**) |-->Input Device "Keyboard0"
>> (==) Automatically adding devices
>> (==) Automatically enabling devices
>> (WW) `fonts.dir' not found (or not valid) in
>> "/usr/X11R7/lib/X11/fonts/Speedo/".
>> Entry deleted from font path.
>> (Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/Speedo/").
>> (WW) `fonts.dir' not found (or not valid) in
>> "/usr/X11R7/lib/X11/fonts/CID/".
>> Entry deleted from font path.
>> (Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/CID/").
>> (==) Including the default font path
>> /usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/TTF/,/usr/X11R7/lib/X11/fonts/Speedo/,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/CID/,/usr/X11R7/lib/X11/fonts/75dpi/,/usr/X11R7/lib/X11/fonts/100dpi/.
>>
>> (**) FontPath set to:
>> /usr/X11R7/lib/X11/fonts/misc/,
>> /usr/X11R7/lib/X11/fonts/TTF/,
>> /usr/X11R7/lib/X11/fonts/Type1/,
>> /usr/X11R7/lib/X11/fonts/75dpi/,
>> /usr/X11R7/lib/X11/fonts/100dpi/,
>> /usr/X11R7/lib/X11/fonts/misc/,
>> /usr/X11R7/lib/X11/fonts/TTF/,
>> /usr/X11R7/lib/X11/fonts/Speedo/,
>> /usr/X11R7/lib/X11/fonts/Type1/,
>> /usr/X11R7/lib/X11/fonts/CID/,
>> /usr/X11R7/lib/X11/fonts/75dpi/,
>> /usr/X11R7/lib/X11/fonts/100dpi/
>> (**) RgbPath set to "/usr/X11R7/lib/X11/rgb"
>> (**) ModulePath set to "/usr/X11R7/lib/modules"
>> (II) Loader magic: 0x81b8a60
>> (II) Module ABI versions:
>> X.Org ANSI C Emulation: 0.3
>> X.Org Video Driver: 2.0
>> X.Org XInput driver : 2.0
>> X.Org Server Extension : 0.3
>> X.Org Font Renderer : 0.5
>> (II) Loader running on netbsd
>> (II) LoadModule: "pcidata"
>> (II) Loading /usr/X11R7/lib/modules//libpcidata.so
>> (II) Module pcidata: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> ABI class: X.Org Video Driver, version 2.0
>> (--) Using wscons driver in pcvt compatibility mode (version 3.32)
>> (--) using VT number 5
>>
>> (II) PCI: Probing config type using method 1
>> (II) PCI: Config type is 1
>> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
>> (WW) OS did not count PCI devices, guessing wildly
>> (II) PCI: PCI scan (all values are in hex)
>> (II) PCI: 00:00:0: chip 1106,3205 card 1106,7205 rev 00 class
>> 06,00,00 hdr 00
>> (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class
>> 06,04,00 hdr 01
>> (II) PCI: 00:07:0: chip 104c,ac50 card fffc,ffff rev 02 class
>> 06,07,00 hdr 02
>> (II) PCI: 00:08:0: chip 104c,8026 card 1025,0033 rev 00 class
>> 0c,00,10 hdr 00
>> (II) PCI: 00:10:0: chip 1106,3038 card 1025,0033 rev 80 class
>> 0c,03,00 hdr 80
>> (II) PCI: 00:10:1: chip 1106,3038 card 1025,0033 rev 80 class
>> 0c,03,00 hdr 80
>> (II) PCI: 00:10:2: chip 1106,3038 card 1025,0033 rev 80 class
>> 0c,03,00 hdr 80
>> (II) PCI: 00:10:3: chip 1106,3104 card 1025,0033 rev 82 class
>> 0c,03,20 hdr 00
>> (II) PCI: 00:11:0: chip 1106,3177 card 1025,0033 rev 00 class
>> 06,01,00 hdr 80
>> (II) PCI: 00:11:1: chip 1106,0571 card 1025,0033 rev 06 class
>> 01,01,8a hdr 00
>> (II) PCI: 00:11:5: chip 1106,3059 card 1025,0033 rev 50 class
>> 04,01,00 hdr 00
>> (II) PCI: 00:11:6: chip 1106,3068 card 1025,0033 rev 80 class
>> 07,80,00 hdr 00
>> (II) PCI: 00:12:0: chip 1106,3065 card 1025,0033 rev 74 class
>> 02,00,00 hdr 00
>> (II) PCI: 01:00:0: chip 1106,7205 card 1025,0033 rev 01 class
>> 03,00,00 hdr 00
>> (II) PCI: End of PCI scan
>> (II) Host-to-PCI bridge:
>> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
>> (II) Bus 0 I/O range:
>> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
>> (II) Bus 0 non-prefetchable memory range:
>> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
>> (II) Bus 0 prefetchable memory range:
>> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
>> (II) PCI-to-PCI bridge:
>> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
>> (II) Bus 1 non-prefetchable memory range:
>> [0] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B]
>> (II) Bus 1 prefetchable memory range:
>> [0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B]
>> (II) PCI-to-ISA bridge:
>> (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN
>> is set)
>> (--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x7205)
>> rev 1, Mem @ 0xf0000000/26, 0xd1000000/24
>> (II) Addressable bus resource ranges are
>> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
>> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
>> (II) OS-reported resource ranges:
>> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
>> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
>> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
>> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff
>> to 0xdfffffff
>> (II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff
>> to 0xd0ffffff
>> (II) Active PCI resource ranges:
>> [0] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
>> [1] -1 0 0xd0004800 - 0xd0004fff (0x800) MX[B]E
>> [2] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B]E
>> [3] -1 0 0xd0004000 - 0xd0007fff (0x4000) MX[B]E
>> [4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
>> [5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
>> [6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
>> [7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
>> [8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
>> [9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
>> [10] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
>> [11] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B]E
>> [12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
>> [13] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]E
>> (II) PCI Memory resource overlap reduced 0xd0004800 from 0xd0004fff
>> to 0xd0004bff
>> (II) PCI I/O resource overlap reduced 0x00001c40 from 0x00001c7f to
>> 0x00001c5f
>> (II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to
>> 0x00001c1f
>> (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd0ffffff
>> to 0xd0003fff
>> (II) PCI Memory resource overlap reduced 0xd0004000 from 0xd0007fff
>> to 0xd00047ff
>> (II) Active PCI resource ranges after removing overlaps:
>> [0] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
>> [1] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
>> [2] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
>> [3] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
>> [4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
>> [5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
>> [6] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
>> [7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
>> [8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
>> [9] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
>> [10] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
>> [11] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
>> [12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
>> [13] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
>> (II) OS-reported resource ranges after removing overlaps with PCI:
>> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
>> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
>> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
>> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) All system resource ranges:
>> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
>> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
>> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> [4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
>> [5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
>> [6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
>> [7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
>> [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
>> [9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
>> [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
>> [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
>> [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>> [13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
>> [14] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
>> [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
>> [16] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
>> [17] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
>> [18] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
>> [19] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
>> (II) "extmod" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "dbe" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "glx" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "freetype" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "type1" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "record" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) "dri" will be loaded. This was enabled by default and also
>> specified in the config file.
>> (II) LoadModule: "cfb"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libcfb.so
>> (II) Module cfb: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> ABI class: X.Org ANSI C Emulation, version 0.3
>> (II) Loading sub module "mfb"
>> (II) LoadModule: "mfb"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libmfb.so
>> (II) Module mfb: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> ABI class: X.Org ANSI C Emulation, version 0.3
>> (II) LoadModule: "cfb32"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libcfb32.so
>> (II) Module cfb32: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> ABI class: X.Org ANSI C Emulation, version 0.3
>> (II) Loading sub module "cfb"
>> (II) LoadModule: "cfb"
>> (II) Reloading /usr/X11R7/lib/modules/extensions//libcfb.so
>> (II) Loading sub module "mfb"
>> (II) LoadModule: "mfb"
>> (II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
>> (II) LoadModule: "dbe"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libdbe.so
>> (II) Module dbe: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> Module class: X.Org Server Extension
>> ABI class: X.Org Server Extension, version 0.3
>> (II) Loading extension DOUBLE-BUFFER
>> (II) LoadModule: "dri"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libdri.so
>> (II) Module dri: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 0.3
>> (II) Loading extension XFree86-DRI
>> (II) LoadModule: "extmod"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libextmod.so
>> (II) Module extmod: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> Module class: X.Org Server Extension
>> ABI class: X.Org Server Extension, version 0.3
>> (II) Loading extension SHAPE
>> (II) Loading extension MIT-SUNDRY-NONSTANDARD
>> (II) Loading extension BIG-REQUESTS
>> (II) Loading extension SYNC
>> (II) Loading extension MIT-SCREEN-SAVER
>> (II) Loading extension XC-MISC
>> (II) Loading extension XFree86-VidModeExtension
>> (II) Loading extension XFree86-Misc
>> (II) Loading extension XFree86-DGA
>> (II) Loading extension DPMS
>> (II) Loading extension TOG-CUP
>> (II) Loading extension Extended-Visual-Information
>> (II) Loading extension XVideo
>> (II) Loading extension XVideo-MotionCompensation
>> (II) Loading extension X-Resource
>> (II) LoadModule: "glx"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libglx.so
>> (II) Module glx: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 0.3
>> (==) AIGLX enabled
>> (II) Loading extension GLX
>> (II) LoadModule: "mfb"
>> (II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
>> (II) LoadModule: "record"
>> (II) Loading /usr/X11R7/lib/modules/extensions//librecord.so
>> (II) Module record: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.13.0
>> Module class: X.Org Server Extension
>> ABI class: X.Org Server Extension, version 0.3
>> (II) Loading extension RECORD
>> (II) LoadModule: "shadow"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libshadow.so
>> (II) Module shadow: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.1.0
>> ABI class: X.Org ANSI C Emulation, version 0.3
>> (II) LoadModule: "xtrap"
>> (II) Loading /usr/X11R7/lib/modules/extensions//libxtrap.so
>> (II) Module xtrap: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> Module class: X.Org Server Extension
>> ABI class: X.Org Server Extension, version 0.3
>> (II) Loading extension DEC-XTRAP
>> (II) LoadModule: "freetype"
>> (II) Loading /usr/X11R7/lib/modules/fonts//libfreetype.so
>> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>> compiled for 1.4.2, module version = 2.1.0
>> Module class: X.Org Font Renderer
>> ABI class: X.Org Font Renderer, version 0.5
>> (II) Loading font FreeType
>> (II) LoadModule: "type1"
>> (II) Loading /usr/X11R7/lib/modules/fonts//libtype1.so
>> (II) Module type1: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.2
>> Module class: X.Org Font Renderer
>> ABI class: X.Org Font Renderer, version 0.5
>> (II) Loading font Type1
>> (II) LoadModule: "vesa"
>> (II) Loading /usr/X11R7/lib/modules/drivers//vesa_drv.so
>> (II) Module vesa: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.3.0
>> Module class: X.Org Video Driver
>> ABI class: X.Org Video Driver, version 2.0
>> (II) LoadModule: "mouse"
>> (II) Loading /usr/X11R7/lib/modules/drivers//mouse_drv.so
>> (II) Module mouse: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.3.0
>> Module class: X.Org XInput Driver
>> ABI class: X.Org XInput driver, version 2.0
>> (II) LoadModule: "kbd"
>> (II) Loading /usr/X11R7/lib/modules/drivers//kbd_drv.so
>> (II) Module kbd: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.3.1
>> Module class: X.Org XInput Driver
>> ABI class: X.Org XInput driver, version 2.0
>> (II) VESA: driver for VESA chipsets: vesa
>> (II) Primary Device is: PCI 01:00:0
>> (--) Chipset vesa found
>> (II) resource ranges after xf86ClaimFixedResources() call:
>> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
>> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
>> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> [4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
>> [5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
>> [6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
>> [7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
>> [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
>> [9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
>> [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
>> [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
>> [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>> [13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
>> [14] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
>> [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
>> [16] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
>> [17] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
>> [18] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
>> [19] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
>> (II) resource ranges after probing:
>> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
>> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
>> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> [4] -1 0 0xd0004c00 - 0xd0004fff (0x400) MX[B]E
>> [5] -1 0 0xd0004800 - 0xd0004bff (0x400) MX[B]E
>> [6] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B]E
>> [7] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B]E
>> [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
>> [9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
>> [10] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
>> [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
>> [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
>> [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
>> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
>> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>> [16] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
>> [17] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
>> [18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
>> [19] -1 0 0x00001c60 - 0x00001c7f (0x20) IX[B]E
>> [20] -1 0 0x00001c40 - 0x00001c5f (0x20) IX[B]E
>> [21] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]E
>> [22] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]E
>> [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
>> [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
>> (II) Setting vga for screen 0.
>> (II) Loading sub module "vbe"
>> (II) LoadModule: "vbe"
>> (II) Loading /usr/X11R7/lib/modules//libvbe.so
>> (II) Module vbe: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.1.0
>> ABI class: X.Org Video Driver, version 2.0
>> (II) Loading sub module "int10"
>> (II) LoadModule: "int10"
>> (II) Loading /usr/X11R7/lib/modules//libint10.so
>> (II) Module int10: vendor="X.Org Foundation"
>> compiled for 1.4.2, module version = 1.0.0
>> ABI class: X.Org Video Driver, version 2.0
>> (II) VESA(0): initializing int10
>> (WW) VESA(0): remove MTRR a0000 - c0000
>> (WW) VESA(0): remove MTRR c0000 - 100000
>> (II) VESA(0): Primary V_BIOS segment is: 0xc000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (II) VESA(0): VESA BIOS detected
>> (II) VESA(0): VESA VBE Version 3.0
>> (II) VESA(0): VESA VBE Total Mem: 65536 kB
>> (II) VESA(0): VESA VBE OEM: VIA KN400
>>
>> (II) VESA(0): VESA VBE OEM Software Rev: 1.0
>> (II) VESA(0): VESA VBE OEM Vendor: (II) VESA(0): VESA VBE OEM
>> Product: (II) VESA(0): VESA VBE OEM Product Rev: (WW) VESA(0): remove
>> MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (==) VESA(0): Depth 24, (==) framebuffer bpp 32
>> (==) VESA(0): RGB weight 888
>> (==) VESA(0): Default visual is TrueColor
>> (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
>> (II) Loading sub module "ddc"
>> (II) LoadModule: "ddc"(II) Module "ddc" already built-in
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (II) VESA(0): VESA VBE DDC supported
>> (II) VESA(0): VESA VBE DDC Level 2
>> (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (II) VESA(0): VESA VBE DDC read failed
>> (II) VESA(0): Searching for matching VESA mode(s):
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (WW) VESA(0): remove MTRR 0 - 1000
>>
>> (II) VESA(0): Total Memory: 1024 64KB banks (65536kB)
>> (EE) VESA(0): No matching modes
>> (WW) VESA(0): remove MTRR 0 - 1000
>> (II) UnloadModule: "vesa"
>> (II) UnloadModule: "int10"
>> (II) Unloading /usr/X11R7/lib/modules//libint10.so
>> (II) UnloadModule: "vbe"
>> (II) Unloading /usr/X11R7/lib/modules//libvbe.so
>> (EE) Screen(s) found, but none have a usable configuration.
>>
>> Fatal server error:
>> no screens found
>>
>> Please consult the The X.Org Foundation support at
>> http://wiki.X.Org
>> for help. Please also check the log file at "/var/log/Xorg.0.log"
>> for additional information.
>>
>>
>> ------------------------------------------------------------------------
>>
>> Section "Device"
>> Identifier "Card0"
>> Driver "via"
>> VendorName "Unknown Vendor"
>> BoardName "Unknown Board"
>> BusID "PCI:1:0:0"
>> EndSection
>> Section "Device"
>> ### Available Driver options are:-
>> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>> ### [arg]: arg optional
>> #Option "VBEModes" # [<bool>]
>> #Option "NoAccel" # [<bool>]
>> #Option "HWCursor" # [<bool>]
>> #Option "SWCursor" # [<bool>]
>> #Option "ShadowFB" # [<bool>]
>> #Option "Rotate" # [<str>]
>> #Option "VideoRAM" # <i>
>> #Option "ActiveDevice" # [<str>]
>> #Option "LCDDualEdge" # [<bool>]
>> #Option "BusWidth" # [<str>]
>> #Option "Center" # [<bool>]
>> #Option "PanelSize" # [<str>]
>> #Option "ForcePanel" # [<bool>]
>> #Option "TVDotCrawl" # [<bool>]
>> #Option "TVDeflicker" # <i>
>> #Option "TVType" # [<str>]
>> #Option "TVOutput" # [<str>]
>> #Option "DisableVQ" # [<bool>]
>> #Option "DRIXINERAMA" # [<bool>]
>> #Option "DisableIRQ" # [<bool>]
>> #Option "EnableAGPDMA" # [<bool>]
>> #Option "NoAGPFor2D" # [<bool>]
>> #Option "NoXVDMA" # [<bool>]
>> #Option "ExaNoComposite" # [<bool>]
>> Identifier "Card0"
>> Driver "via"
>> VendorName "Unknown Vendor"
>> BoardName "Unknown Board"
>> BusID "PCI:1:0:0"
>> EndSection
>> Section "ServerLayout"
>> Identifier "X.org Configured"
>> Screen 0 "Screen0" 0 0
>> InputDevice "Mouse0" "CorePointer"
>> InputDevice "Keyboard0" "CoreKeyboard"
>> EndSection
>> Section "Files"
>> RgbPath "/usr/X11R7/lib/X11/rgb"
>> ModulePath "/usr/X11R7/lib/modules"
>> FontPath "/usr/X11R7/lib/X11/fonts/misc/"
>> FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
>> FontPath "/usr/X11R7/lib/X11/fonts/Speedo/"
>> FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
>> FontPath "/usr/X11R7/lib/X11/fonts/CID/"
>> FontPath "/usr/X11R7/lib/X11/fonts/75dpi/"
>> FontPath "/usr/X11R7/lib/X11/fonts/100dpi/"
>> EndSection
>> Section "Module"
>> Load "GLcore"
>> Load "cfb"
>> Load "cfb32"
>> Load "dbe"
>> Load "dri"
>> Load "extmod"
>> Load "glx"
>> Load "mfb"
>> Load "record"
>> Load "shadow"
>> Load "xtrap"
>> Load "freetype"
>> Load "type1"
>> EndSection
>> Section "InputDevice"
>> Identifier "Keyboard0"
>> Driver "kbd"
>> EndSection
>> Section "InputDevice"
>> Identifier "Mouse0"
>> Driver "mouse"
>> Option "Protocol" "wsmouse"
>> Option "Device" "/dev/wsmouse"
>> Option "ZAxisMapping" "4 5 6 7"
>> EndSection
>> Section "Monitor"
>> Identifier "Monitor0"
>> VendorName "Monitor Vendor"
>> ModelName "Monitor Model"
>> HorizSync 31.5 - 64.0
>> VertRefresh 50.0 - 90.0
>> # HorizSync 31.5 - 48.0
>> # VertRefresh 59.0 - 75.0
>> EndSection
>> Section "Screen"
>> Identifier "Screen0"
>> Device "Card0"
>> Monitor "Monitor0"
>> SubSection "Display"
>> Viewport 0 0
>> Depth 1
>> Modes "1024x768" "800x600"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 4
>> Modes "1024x768" "800x600"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 8
>> Modes "1024x768" "800x600"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 15
>> Modes "1024x768" "800x600"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 16
>> Modes "1024x768" "800x600"
>> EndSubSection
>> SubSection "Display"
>> Viewport 0 0
>> Depth 24
>> Modes "1024x768" "800x600"
>> EndSubSection
>> EndSection
>>
>>
>> ------------------------------------------------------------------------
>>
>> # File generated by xorgconfig.
>>
>> #
>> # Copyright 2004 The X.Org Foundation
>> #
>> # Permission is hereby granted, free of charge, to any person
>> obtaining a
>> # copy of this software and associated documentation files (the
>> "Software"),
>> # to deal in the Software without restriction, including without
>> limitation
>> # the rights to use, copy, modify, merge, publish, distribute,
>> sublicense,
>> # and/or sell copies of the Software, and to permit persons to whom the
>> # Software is furnished to do so, subject to the following conditions:
>> # # The above copyright notice and this permission notice shall be
>> included in
>> # all copies or substantial portions of the Software.
>> # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> EXPRESS OR
>> # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> MERCHANTABILITY,
>> # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>> SHALL
>> # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> LIABILITY,
>> # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
>> OUT OF
>> # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
>> # SOFTWARE.
>> # # Except as contained in this notice, the name of The X.Org
>> Foundation shall
>> # not be used in advertising or otherwise to promote the sale, use or
>> other
>> # dealings in this Software without prior written authorization from
>> # The X.Org Foundation.
>> #
>>
>> # **********************************************************************
>> # Refer to the xorg.conf(5) man page for details about the format of
>> # this file.
>> # **********************************************************************
>>
>> # **********************************************************************
>> # Module section -- this section is used to specify
>> # which dynamically loadable modules to load.
>> # **********************************************************************
>> #
>> Section "Module"
>>
>> # This loads the DBE extension module.
>>
>> Load "dbe" # Double buffer extension
>>
>> # This loads the miscellaneous extensions module, and disables
>> # initialisation of the XFree86-DGA extension within that module.
>> SubSection "extmod"
>> Option "omit xfree86-dga" # don't initialise the DGA
>> extension
>> EndSubSection
>>
>> # This loads the font modules
>> # Load "type1"
>> Load "freetype"
>> # Load "xtt"
>>
>> # This loads the GLX module
>> # Load "glx"
>> # This loads the DRI module
>> # Load "dri"
>>
>> EndSection
>>
>> # **********************************************************************
>> # Files section. This allows default font and rgb paths to be set
>> # **********************************************************************
>>
>> Section "Files"
>>
>> # The location of the RGB database. Note, this is the name of the
>> # file minus the extension (like ".txt" or ".db"). There is normally
>> # no need to change the default.
>>
>> # RgbPath "/usr/share/X11/rgb"
>>
>> # Multiple FontPath entries are allowed (which are concatenated
>> together),
>> # as well as specifying multiple comma-separated entries in one FontPath
>> # command (or a combination of both methods)
>> # #
>> # FontPath "/usr/lib/X11/fonts/local/"
>> # FontPath "/usr/lib/X11/fonts/misc/"
>> # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
>> # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
>> # FontPath "/usr/lib/X11/fonts/Speedo/"
>> # FontPath "/usr/lib/X11/fonts/Type1/"
>> # FontPath "/usr/lib/X11/fonts/TrueType/"
>> # FontPath "/usr/lib/X11/fonts/freefont/"
>> # FontPath "/usr/lib/X11/fonts/75dpi/"
>> # FontPath "/usr/lib/X11/fonts/100dpi/"
>>
>> # The module search path. The default path is shown here.
>>
>> # ModulePath "/usr/lib/modules"
>>
>> EndSection
>>
>> # **********************************************************************
>> # Server flags section.
>> # **********************************************************************
>>
>> Section "ServerFlags"
>>
>> # Uncomment this to cause a core dump at the spot where a signal is #
>> received. This may leave the console in an unusable state, but may
>> # provide a better stack trace in the core dump to aid in debugging
>>
>> # Option "NoTrapSignals"
>>
>> # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
>> # (where n is 1 through 12). This allows clients to receive these key
>> # events.
>>
>> # Option "DontVTSwitch"
>>
>> # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
>> # This allows clients to receive this key event.
>>
>> # Option "DontZap"
>>
>> # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
>> # sequences. This allows clients to receive these key events.
>>
>> # Option "Dont Zoom"
>>
>> # Uncomment this to disable tuning with the xvidtune client. With
>> # it the client can still run and fetch card and monitor attributes,
>> # but it will not be allowed to change them. If it tries it will
>> # receive a protocol error.
>>
>> # Option "DisableVidModeExtension"
>>
>> # Uncomment this to enable the use of a non-local xvidtune client.
>> # Option "AllowNonLocalXvidtune"
>>
>> # Uncomment this to disable dynamically modifying the input device
>> # (mouse and keyboard) settings.
>> # Option "DisableModInDev"
>>
>> # Uncomment this to enable the use of a non-local client to
>> # change the keyboard or mouse settings (currently only xset).
>>
>> # Option "AllowNonLocalModInDev"
>>
>> EndSection
>>
>> # **********************************************************************
>> # Input devices
>> # **********************************************************************
>>
>> # **********************************************************************
>> # Core keyboard's InputDevice section
>> # **********************************************************************
>>
>> Section "InputDevice"
>>
>> Identifier "Keyboard1"
>> Driver "kbd"
>>
>> Option "AutoRepeat" "500 30"
>>
>> # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>> # Option "Xleds" "1 2 3"
>>
>> # Option "LeftAlt" "Meta"
>> # Option "RightAlt" "ModeShift"
>>
>> # To customise the XKB settings to suit your keyboard, modify the
>> # lines below (which are the defaults). For example, for a non-U.S.
>> # keyboard, you will probably want to use:
>> # Option "XkbModel" "pc105"
>> # If you have a US Microsoft Natural keyboard, you can use:
>> # Option "XkbModel" "microsoft"
>> #
>> # Then to change the language, change the Layout setting.
>> # For example, a german layout can be obtained with:
>> # Option "XkbLayout" "de"
>> # or:
>> # Option "XkbLayout" "de"
>> # Option "XkbVariant" "nodeadkeys"
>> #
>> # If you'd like to switch the positions of your capslock and
>> # control keys, use:
>> # Option "XkbOptions" "ctrl:swapcaps"
>>
>> # These are the default XKB settings for Xorg
>> # Option "XkbRules" "xorg"
>> # Option "XkbModel" "pc105"
>> # Option "XkbLayout" "us"
>> # Option "XkbVariant" ""
>> # Option "XkbOptions" ""
>>
>> # Option "XkbDisable"
>>
>> Option "XkbRules" "xorg"
>> Option "XkbModel" "pc105"
>> Option "XkbLayout" "fr"
>> Option "XkbVariant" "fr"
>>
>> EndSection
>>
>>
>> # **********************************************************************
>> # Core Pointer's InputDevice section
>> # **********************************************************************
>>
>> Section "InputDevice"
>>
>> # Identifier and driver
>>
>> Identifier "Mouse1"
>> Driver "mouse"
>> Option "Protocol" "wsmouse" # wsmouse protocol
>> Option "Device" "/dev/wsmouse"
>>
>> # Mouse-speed setting for PS/2 mouse.
>>
>> # Option "Resolution" "256"
>>
>> # Baudrate and SampleRate are only for some Logitech mice. In
>> # almost every case these lines should be omitted.
>>
>> # Option "BaudRate" "9600"
>> # Option "SampleRate" "150"
>>
>> # Mouse wheel mapping. Default is to map vertical wheel to buttons 4
>> & 5,
>> # horizontal wheel to buttons 6 & 7. Change if your mouse has more
>> than
>> # 3 buttons and you need to map the wheel to different button ids to
>> avoid
>> # conflicts.
>>
>> Option "ZAxisMapping" "4 5 6 7"
>>
>> # Emulate3Buttons is an option for 2-button mice
>> # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>>
>> # Option "Emulate3Buttons"
>> # Option "Emulate3Timeout" "50"
>>
>> # ChordMiddle is an option for some 3-button Logitech mice
>>
>> # Option "ChordMiddle"
>>
>> EndSection
>>
>>
>> # **********************************************************************
>> # Other input device sections # this is optional and is required only
>> if you
>> # are using extended input devices. This is for example only. Refer
>> # to the xorg.conf man page for a description of the options.
>> # **********************************************************************
>> #
>> # Section "InputDevice" # Identifier "Mouse2"
>> # Driver "mouse"
>> # Option "Protocol" "MouseMan"
>> # Option "Device" "/dev/mouse2"
>> # EndSection
>> #
>> # Section "InputDevice"
>> # Identifier "spaceball"
>> # Driver "magellan"
>> # Option "Device" "/dev/cua0"
>> # EndSection
>> #
>> # Section "InputDevice"
>> # Identifier "spaceball2"
>> # Driver "spaceorb"
>> # Option "Device" "/dev/cua0"
>> # EndSection
>> #
>> # Section "InputDevice"
>> # Identifier "touchscreen0"
>> # Driver "microtouch"
>> # Option "Device" "/dev/ttyS0"
>> # Option "MinX" "1412"
>> # Option "MaxX" "15184"
>> # Option "MinY" "15372"
>> # Option "MaxY" "1230"
>> # Option "ScreenNumber" "0"
>> # Option "ReportingMode" "Scaled"
>> # Option "ButtonNumber" "1"
>> # Option "SendCoreEvents"
>> # EndSection
>> #
>> # Section "InputDevice"
>> # Identifier "touchscreen1"
>> # Driver "elo2300"
>> # Option "Device" "/dev/ttyS0"
>> # Option "MinX" "231"
>> # Option "MaxX" "3868"
>> # Option "MinY" "3858"
>> # Option "MaxY" "272"
>> # Option "ScreenNumber" "0"
>> # Option "ReportingMode" "Scaled"
>> # Option "ButtonThreshold" "17"
>> # Option "ButtonNumber" "1"
>> # Option "SendCoreEvents"
>> # EndSection
>>
>> # **********************************************************************
>> # Monitor section
>> # **********************************************************************
>>
>> # Any number of monitor sections may be present
>>
>> Section "Monitor"
>>
>> Identifier "My Monitor"
>>
>> # HorizSync is in kHz unless units are specified.
>> # HorizSync may be a comma separated list of discrete values, or a
>> # comma separated list of ranges of values.
>> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
>> # USER MANUAL FOR THE CORRECT NUMBERS.
>>
>> HorizSync 31.5
>>
>> # HorizSync 30-64 # multisync
>> # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
>> # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
>>
>> # VertRefresh is in Hz unless units are specified.
>> # VertRefresh may be a comma separated list of discrete values, or a
>> # comma separated list of ranges of values.
>> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
>> # USER MANUAL FOR THE CORRECT NUMBERS.
>>
>> VertRefresh 50-70
>>
>> EndSection
>>
>>
>> # **********************************************************************
>> # Graphics device section
>> # **********************************************************************
>>
>> # Any number of graphics device sections may be present
>>
>> # Standard VGA Device:
>>
>> Section "Device"
>> Identifier "Standard VGA"
>> VendorName "Unknown"
>> BoardName "Unknown"
>>
>> # The chipset line is optional in most cases. It can be used to
>> override
>> # the driver's chipset detection, and should not normally be specified.
>>
>> # Chipset "generic"
>>
>> # The Driver line must be present. When using run-time loadable driver
>> # modules, this line instructs the server to load the specified driver
>> # module. Even when not using loadable driver modules, this line
>> # indicates which driver should interpret the information in this
>> section.
>>
>> Driver "vesa"
>> # The BusID line is used to specify which of possibly multiple devices
>> # this section is intended for. When this line isn't present, a device
>> # section can only match up with the primary video device. For PCI
>> # devices a line like the following could be used. This line should not
>> # normally be included unless there is more than one video device
>> # intalled.
>>
>> # BusID "PCI:0:10:0"
>>
>> # VideoRam 256
>>
>> # Clocks 25.2 28.3
>>
>> EndSection
>>
>> # Device configured by xorgconfig:
>>
>> Section "Device"
>> Identifier "* Generic VESA compatible"
>> Driver "vesa"
>> #VideoRam 65536
>> # Insert Clocks lines here if appropriate
>> EndSection
>>
>>
>> # **********************************************************************
>> # Screen sections
>> # **********************************************************************
>>
>> # Any number of screen sections may be present. Each describes
>> # the configuration of a single screen. A single specific screen
>> section
>> # may be specified from the X server command line with the "-screen"
>> # option.
>> Section "Screen"
>> Identifier "Screen 1"
>> Device "* Generic VESA compatible"
>> Monitor "My Monitor"
>> DefaultDepth 16
>>
>> Subsection "Display"
>> Depth 8
>> Modes "1280x1024" "1024x768" "800x600" "640x480"
>> ViewPort 0 0
>> EndSubsection
>> Subsection "Display"
>> Depth 16
>> Modes "1024x768" "800x600" "640x480"
>> ViewPort 0 0
>> EndSubsection
>> Subsection "Display"
>> Depth 24
>> Modes "1280x1024" "1024x768" "800x600" "640x480"
>> ViewPort 0 0
>> EndSubsection
>> EndSection
>>
>> # **********************************************************************
>> # ServerLayout sections.
>> # **********************************************************************
>>
>> # Any number of ServerLayout sections may be present. Each describes
>> # the way multiple screens are organised. A specific ServerLayout
>> # section may be specified from the X server command line with the
>> # "-layout" option. In the absence of this, the first section is used.
>> # When now ServerLayout section is present, the first Screen section
>> # is used alone.
>>
>> Section "ServerLayout"
>>
>> # The Identifier line must be present
>> Identifier "Simple Layout"
>>
>> # Each Screen line specifies a Screen section name, and optionally
>> # the relative position of other screens. The four names after
>> # primary screen name are the screens to the top, bottom, left and right
>> # of the primary screen. In this example, screen 2 is located to the
>> # right of screen 1.
>>
>> Screen "Screen 1"
>>
>> # Each InputDevice line specifies an InputDevice section name and
>> # optionally some options to specify the way the device is to be
>> # used. Those options include "CorePointer", "CoreKeyboard" and
>> # "SendCoreEvents".
>>
>> InputDevice "Mouse1" "CorePointer"
>> InputDevice "Keyboard1" "CoreKeyboard"
>>
>> EndSection
>>
>> # Section "DRI"
>> # Mode 0666
>> # EndSection
>>
>>
>
More information about the xorg
mailing list