Very odd problem: Only getting an output to my screen, when running xine

[Hendrik Friedel]

Hello,

You are my last Hope. Doesn't really nonone have an Idea?

Greetings, Hendrik

Am 30.11.2010 um 20:25 schrieb Hendrik Friedel <hendrik at friedels.name>:

> Hello,
> 
> I have a very odd problem with my new TV.
> I only get an output to it, when runnig xine or vdr-sxfe, which is a xine based frontend to VDR.
> As soon, as I stop xine, the TV shows "LG, No Signal".
> I can start nvidia-settings then, but it does not show up. Still I get "LG, No Signal". Only, when I don't stop xine, and start nvidia-settings (or any other X application) on top of xine, I see the application.
> 
> This is odd already. But it get's better. The output of xrandr does not change between the two (working/not working) states:
> xrandr --verbose
> Screen 0: minimum 800 x 600, current 1920 x 1080, maximum 1920 x 1080
> default connected 1920x1080+0+0 (0x12a) normal (normal) 0mm x 0mm
>        Identifier: 0x129
>        Timestamp:  22991
>        Subpixel:   unknown
>        Clones:
>        CRTC:       0
>        CRTCs:      0
>        Transform:  1.000000 0.000000 0.000000
>                    0.000000 1.000000 0.000000
>                    0.000000 0.000000 1.000000
>                   filter:
>  1920x1080 (0x12a)  103.7MHz *current
>        h: width  1920 start    0 end    0 total 1920 skew    0 clock  54.0KHz
>        v: height 1080 start    0 end    0 total 1080           clock  50.0Hz
>  1920x1080 (0x12b)  105.8MHz
>        h: width  1920 start    0 end    0 total 1920 skew    0 clock  55.1KHz
>        v: height 1080 start    0 end    0 total 1080           clock  51.0Hz
>  800x600 (0x12c)   25.0MHz
>        h: width   800 start    0 end    0 total  800 skew    0 clock  31.2KHz
>        v: height  600 start    0 end    0 total  600           clock  52.0Hz
> 
> 
> The problem does not occur, when I use VGA instead of HDMI. The xrandr output:
> xrandr --verbose
> Screen 0: minimum 320 x 240, current 1920 x 1080, maximum 1920 x 1080
> default connected 1920x1080+0+0 (0x12a) normal (normal) 0mm x 0mm
>        Identifier: 0x129
>        Timestamp:  1630366
>        Subpixel:   unknown
>        Clones:
>        CRTC:       0
>        CRTCs:      0
>        Transform:  1.000000 0.000000 0.000000
>                    0.000000 1.000000 0.000000
>                    0.000000 0.000000 1.000000
>                   filter:
>  1920x1080 (0x12a)  124.4MHz *current
>        h: width  1920 start    0 end    0 total 1920 skew    0 clock  64.8KHz
>        v: height 1080 start    0 end    0 total 1080           clock  60.0Hz
> 
> My setup:
> The Mainboard is a Asus M3n78-EM. The GPU is a Nvidia 8300.
> It does not matter, whether I use vdpau or not for the xine output.
> The xorg.conf, that I use can be found here: http://wbreu.htpc-forum.de/downloads/xorg.confsinglescreen
> 
> Attached a log with logverbose 6.
> 
> I would greatly appreciate any help.
> 
> Greetings,
> Hendrik
> <Xorg.0.log.gz>
> _______________________________________________
> xorg at lists.freedesktop.org: X.Org support
> Archives: http://lists.freedesktop.org/archives/xorg
> Info: http://lists.freedesktop.org/mailman/listinfo/xorg
> Your subscription address: hen_mail at web.de