radeon: different colors on different heads?

[Christopher Lightfoot]

Ah ah, just realised you said it only has one DMS-59; a little harder to
test without another splitter. My NVS440 has two DMS-95 and I tried a bunch
of different adapters before I found one that had the correct pins - the
ones I eventually got were from ebay too and have been fine.

Chris

On Fri, Nov 13, 2009 at 12:24 PM, Christopher Lightfoot <
lightfoot256 at googlemail.com> wrote:

> Lol, Hopefully you tried stuff like swapping the monitors around and cables
> etc to prove it's nothing to do with the splitter? :-p
>
> The fact you mention certain "bits" are missing definately correlates quite
> highly with bent/broken pins on the splitter.
>
> Chris
>
>
> On Fri, Nov 13, 2009 at 12:13 AM, Alex Deucher <alexdeucher at gmail.com>wrote:
>
>> 2009/11/12 Csillag Kristof <csillag.kristof at united-consult.hu>:
>> > Alex Deucher wrote:
>> >
>> >> Is the problematic screen the one driven by DVO or internal tmds?
>> >> Post your Xorg log and specify which output is the problematic one
>> >> (DVI-0 or DVI-1).
>> >
>> > I have attached the log.
>> > The problematic head is DVI-1, which is driven by DVO.
>> >
>> >   * * *
>> >
>> > One naive question: the FireMV 2200 card in question has one DMS-59
>> > slot, which is then divided to two DVI-U ports with a special Y cable.
>> > I have purchased this Y cable separately, from ebay.
>> >
>> > Could it be that the problem is with this Y card?
>>
>> Could definitely be a problem with the cable, or a problem with the
>> external tmds transmitter setup.
>>
>> Alex
>> _______________________________________________
>> xorg mailing list
>> xorg at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/xorg
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.x.org/archives/xorg/attachments/20091113/5662947d/attachment.html>