Need help with setting up Infocus Screenplay 5000 projector

[john smith]

I have had an Infocus Screenplay 5000 for a few weeks now, and its a
great projector. After first getting it and the 30 ft DVI cable I
bought for it, I hooked it straight up to my graphics card and after a
few hours of tweaking xorg.conf I got it working nicely. However,I
ended up migrating to Sabayon (a Gentoo based distro). I saved my
orignal xorg.conf file from ubuntu. After installing, I switched out
the xorg.conf, but still the projector displays the default image. I'v
been at it for days and still can't get it working. Here is my
xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister at builder57)  Sat Jan 24
20:04:42 PST 2009

# commented out by update-manager, HAL is now used
#Section "InputDevice"
#    Identifier  "Keyboard0"
#    Driver      "kbd"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
#    Identifier  "Mouse0"
#    Driver      "mouse"
#    Option        "Protocol" "auto"
#    Option        "Device" "/dev/input/mice"
#    Option        "ZAxisMapping" "4 5 6 7"
#EndSection
#Section “ServerFlags”
#    Option “DontZap” “false”
#EndSection

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" LeftOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "AIGLX" "true"
EndSection

Section "Files"
    ModulePath      "/usr/lib/xorg/modules"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/X11/100dpi"
    FontPath        "/usr/share/fonts/X11/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "extmod"
    Load           "dbe"
    Load           "glx"
    Load           "record"
    Load           "xtrap"
    Load           "type1"
    Load           "nvidia"
EndSection

Section "ServerFlags"
    Option         "DontZap" "False"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "PTS"
    ModelName      "770"
    HorizSync       30.0 - 80.0
    VertRefresh     60.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    ModeLine       "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806
    VertRefresh    60.0
EndSection

Section "Device"
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "nVidia Corporation"
    BoardName      "NV28GL [Quadro4 980 XGL]"
    BusID          "AGP:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Card1"
    Driver         "nvidia"
    BusID          "AGP:1:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    Option         "FlatPanel" "True"
    Option         "XAANoOffscreenPixmaps" "true"
    Option         "AllowGLXWithComposite" "true"
    Option         "TripleBuffer" "true"
    Option         "NvAGP" "1"
    Option         "NoLogo" "True"
    SubSection     "Display"
        Viewport    0 0
        Depth       24
        Modes      "1440x900"
    EndSubSection
EndSection

Section "Screen"

    #Option         "AddARGBGLXVisuals" "True"
    #Option         "NvAGP" "1"
    #Option         "NoLogo" "True"
    Option "HorizSync"
    Option "VertRefresh" "60"
    Identifier     "Screen1"
    Device         "Card1"
    Monitor        "Monitor1"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 1
        Depth       24
        Modes      "1024x768"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "enable"


EndSection


The only thing I have added is the VertRefresh 60.0 option, as I read
alot of projectors are touchy about refresh rates. Obviously, it
didn't help. Graphics card is a Quadro4 980 XGL. 30ft DVI from
computer to a DVI to M1 adaptor on the projector. Projector EDID
appears in logs, so cable must be good.

(Also, even though the modlines & mode says 1024x768, when I orginally
set it up, the computer automaticly uped the output resolution to
1280x720. I never bothered to change it. Strangly enough, removing the
modlines would NOT allow the projector to display at all. Never got
around to trying 1280 modelines.)

Like I have said, I'v been at it for days, and its KILLING me not
having my 720p projector. PLEASE HELP!