Driver problem: Chips and Technologies F65555 HiQVPro

[Gustavo G. Moyano]

Hi guys,

It worked!!!  Below are the steps I followed:

1) Download the code from git:

   # git clone git://anongit.freedesktop.org/xorg/driver/xf86-video-chips

2) Fetch the driver code for the 7.2 release:

   # cd /usr/ports/x11-drivers/xf86-video-chips
   # make fetch

3) Then, I compared the fetched version against the one downloaded from git.  There were updated three files: ct_driver.c, ct_shadow.c and ct_video.c  

4) Copy those three files into the fetched src directory

5) make install

After all these, the driver was created and installed.

Thank you guys for helping me with this issue.  I REALLY appreciate your help!!!

Regards,

ggmoy

> From: Matthieu Herrb <matthieu.herrb at laas.fr>
> Subject: Re: Driver problem: Chips and Technologies F65555 HiQVPro
> To: ggmoy at yahoo.com
> Cc: xorg at lists.freedesktop.org
> Date: Tuesday, 28 July, 2009, 3:26 AM
> Moyano, Gustavo wrote:
> > Hi all,
> > 
> > I'm having problems setting up Xorg on my
> laptop.  I'm migrating from FreeBSD 4.11 to FreeBSD 7.2
> but seems that the "chips" driver does not recognize the
> hardware.  I had no problems with FreeBSD 4.11 but 7.2
> is not working.  My laptop is a Toshiba Satellite
> 330CDS:
> > 
> >     * Processor
> >           o Intel
> Pentium (1.8 volt) with MMX technology, running at 266MHz
> >           o 512KB
> pipelined burst SRAM level 2 cache
> >           o 66MHz
> bus clock speed
> >     * Memory
> >           o 32MB
> EDO DRAM standard
> >     * Disk Drives
> >           o 4.1
> gigabyte hard disk drive
> >           o 1.44MB,
> 3.5" diskette drive (integrated)
> >     * CD-ROM
> >           o 20X
> (max) CD-ROM module (integrated)
> >     * Display System
> >           o 12.1"
> diagonal, 800 x 600 resolution color display
> >           o Color
> bright dual scan
> >           o C &
> T HiQVideo PCI (65555) video controller
> >           o 2MB
> Video memory (EDO DRAM)
> >           o 64-bit
> BitBLT graphics acceleration
> >           o 66MHz
> local bus clock speed
> >           o Super
> Video Graphics Array (SVGA) compatible display
> > 
> > I'm attaching the xorg.conf file created when I ran "X
> -configure" and the log file created when I ran "X -config
> ..."
> > 
> > I don't know if something changed inside the driver
> since it was working fine on FreeBSD 4.11, which used
> XFree86.
> > 
> > Could someone give me a little help, please?
> > 
> 
> that sounds like bugzilla #18122.
> <https://bugs.freedesktop.org/show_bug.cgi?id=18122>
> The xf86-video-chips 1.2.1 driver was not correctly
> converted to
> libpciaccess.
> 
> Can you try the -current version from git, or apply the the
> patch from
> <https://bugs.freedesktop.org/attachment.cgi?id=27396>
> ?
> 
> -- 
> Matthieu Herrb
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>