dga does't work correctly

[Clemens Eisserer]

Which video driver are you using?
You could try to switch to XAA, if you're using an open-source driver.

- Clemens

2009/1/8 Pawel K <pawlaczus at yahoo.com>:
> Hello
>
> It looks like DGA is not fully operational on my system:
> I have the following in
>
> /etc/X11/xorg.conf:
> SubSection  "extmod"
> #      Option    "omit xfree86-dga"   # don't initialise the DGA extension
> EndSubSection
>
> Xorg.0.log:
> (II) Loading extension XFree86-DGA
>
> xdpyinfo:
> number of extensions:    31
> ...
> XFree86-DGA
> ...
>
> I'm using the following versions:
> xorg-server-1.3.0.0-r6
> xorg-x11-7.2
> mplayer-1.0_rc2_p27725-r1
> xmame-0.106
> linux kernel 2.6.25.14
>
> When I launch xmame (as root) I get the following info message:
> XDGAOpenFramebuffer failed
> Use of DGA-modes is disabled
>
> When I launch:
> mplayer -vo dga
>
> I get the follwing info:
> [swscaler @ 0x8a49f40]using unscaled yuv420p -> rgb32 special
> converter
> vo_dga: Mode: depth=15, bpp=16, r=007c00, g=0003e0, b=00001f, not
> supported (-bpp 15)
> vo_dga: Mode: depth=16, bpp=16, r=00f800, g=0007e0, b=00001f, not
> supported (-bpp 16)
> vo_dga: Mode: depth=24, bpp=24, r=ff0000, g=00ff00, b=0000ff, native (-
> bpp 24)
> vo_dga: Framebuffer mapping failed!!!
> FATAL: Cannot initialize video driver.
> vo_dga: Mode: depth=24, bpp=32, r=ff0000, g=00ff00, b=0000ff, native (-
> bpp 32)
> VO: [dga] 400x300 => 400x300 BGRA
> vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!
> vo_dga: Selected hardware mode  640 x  480 @  60 Hz @ depth 24, bitspp
> 32.
> vo_dga: Video parameters by codec: 400 x 300, depth 24, bitspp 32.
> VO: [dga] 400x300 => 400x300 BGRA
> vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!
> vo_dga: Selected hardware mode  640 x  480 @  60 Hz @ depth 24, bitspp
> 32.
> vo_dga: Video parameters by codec: 400 x 300, depth 24, bitspp 32.
> vo_dga: Framebuffer mapping failed!!!
> FATAL: Cannot initialize video driver.
> VO: [dga] 400x300 => 400x300 BGRA
> vo_dga: DGA 2.0 available :-) Can switch resolution AND depth!
> vo_dga: Selected hardware mode  640 x  480 @  60 Hz @ depth 24, bitspp
> 32.
> vo_dga: Video parameters by codec: 400 x 300, depth 24, bitspp 32.
> vo_dga: Framebuffer mapping failed!!!
> FATAL: Cannot initialize video driver.
>
> FATAL: Could not initialize video filters (-vf) or video output (-vo).
>
> Do you know what can be wrong ?
>
> thanks for any help
>
>
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
>