FW: Dual Head

[Alan Hourihane]

That's not enough information.

The complete log file would be needed, but you can also try upgrading to
1.7.4 which is compatible with X11R7.1.

Alan.

On Tue, 2008-06-03 at 13:19 +0530, Rudradev AC wrote:
> Dear Alan,
> 
> We are getting few warnings listed below:
> 
> I810(0): Extended BIOS function 0x5f05 failed. 
> I810(0): Extended BIOS function 0x5f64 failed.
> 
> Thanks,
> Rudradev AC
> 
> 
> -----Original Message-----
> From: Alan Hourihane [mailto:alanh at fairlite.demon.co.uk] 
> Sent: Tuesday, June 03, 2008 1:05 PM
> To: Deepak Bhatia
> Cc: xorg list; Ashish Jain; Rudradev AC
> Subject: RE: FW: Dual Head
> 
> Well, it could be a problem with the VideoBIOS as that's what the driver
> has to use to setup dual head. Have you looked at the logfile to see if
> there's any  problems ?
> 
> The later X11R7.3 doesn't use the BIOS anymore and is much more flexible
> in it's mode setup. And you really should upgrade.
> 
> Alan.
> 
> On Tue, 2008-06-03 at 12:24 +0530, Deepak Bhatia wrote:
> > Dear Alan,
> > 
> > We tried the settings given below but the dual display is not coming.
> > 
> > We are currently using the HP Laptops nx6120.
> > 
> > Best Regards
> > 
> > Deepak Bhatia
> > 
> > -----Original Message-----
> > From: Alan Hourihane [mailto:alanh at fairlite.demon.co.uk] 
> > Sent: Monday, June 02, 2008 6:38 PM
> > To: Deepak Bhatia
> > Cc: xorg list; Ashish Jain; Rudradev AC
> > Subject: Re: FW: Dual Head
> > 
> > Your MonitorLayout should probably be
> > 
> > 	Option "MonitorLayout" "CRT,LFP"
> > 
> > or possibly,
> > 
> > 	Option "MonitorLayout" "DFP,LFP"
> > 
> > Alan.
> > 
> > On Mon, 2008-06-02 at 17:29 +0530, Deepak Bhatia wrote:
> > > 
> > > Dear Alan,
> > > 
> > > We have tried the same with X11R7.1 but dual head display is not
> > > possible. Also expansion is not possible when turn on the xinerama
> > > option.
> > > 
> > > But when I change the "MonitorLayout" following effect we saw. The
> > > xorg.conf file is attached above.
> > > 
> > > 1. If following settings were changed then display was showing on
> > > laptop.
> > > 
> > > Section "Device"
> > > 	Identifier  "Videocard0"
> > > 	.
> > > 	.
> > > 	Option "MonitorLayout" "LFP,LFP"
> > > 	.
> > > EndSection
> > > 
> > > Section "Device"
> > > 	Identifier  "Videocard1"
> > > 	.
> > > 	.
> > > 	Option "MonitorLayout" "LFP,LFP"
> > > 	.
> > > EndSection
> > > 
> > > 2. If following settings were changed then display was showing on
> > > Monitor.
> > > 
> > > Section "Device"
> > > 	Identifier  "Videocard0"
> > > 	.
> > > 	.
> > > 	Option "MonitorLayout" "CRT, DFP"
> > > 	.
> > > EndSection
> > > 
> > > Section "Device"
> > > 	Identifier  "Videocard1"
> > > 	.
> > > 	.
> > > 	Option "MonitorLayout" "CRT,DFP"
> > > 	.
> > > EndSection
> > > 
> > > 3. If following settings were changed then display was not showing.
> > > 
> > > Section "Device"
> > > 	Identifier  "Videocard0"
> > > 	.
> > > 	.
> > > 	Option "MonitorLayout" "LFP, DFP"
> > > 	.
> > > EndSection
> > > 
> > > Section "Device"
> > > 	Identifier  "Videocard1"
> > > 	.
> > > 	.
> > > 	Option "MonitorLayout" "CRT,DFP"
> > > 	.
> > > EndSection
> > > 
> > > 
> > > Thanks & Regards
> > > 
> > > Deepak Bhatia
> > > 
> > > 
> > > Disclaimer:
> > > 
> > > This message and any attachment(s) contained here are information
> that
> > is confidential, proprietary to NEC HCL System Technologies and its
> > customers. Contents may be privileged or otherwise protected by law.
> The
> > information is solely intended for the individual or the entity it is
> > addressed to. If you are not the intended recipient of this message,
> you
> > are not authorized to read, forward, print, retain, copy or
> disseminate
> > this message or any part of it. If you have received this e-mail in
> > error, please notify the sender immediately by return e-mail and
> delete
> > it from your computer.
> > 
> > 
> > Disclaimer:
> > 
> > This message and any attachment(s) contained here are information that
> is confidential, proprietary to NEC HCL System Technologies and its
> customers. Contents may be privileged or otherwise protected by law. The
> information is solely intended for the individual or the entity it is
> addressed to. If you are not the intended recipient of this message, you
> are not authorized to read, forward, print, retain, copy or disseminate
> this message or any part of it. If you have received this e-mail in
> error, please notify the sender immediately by return e-mail and delete
> it from your computer.
> > 
> 
> 
> Disclaimer:
> 
> This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer.
>