radeon driver and DRI

Florian Echtler floe at butterbrot.org
Wed Jul 2 05:35:20 PDT 2008


Hello everybody,

I have a Radeon Mobility X1400 and just wanted to give the radeon driver
a shot to finally get rid of fglrx. It works fine, with the exception of
DRI. xorg.log shows:

(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(WW) RADEON(0): R500 support is under development. Please report any
issues to xorg-driver-ati at lists.x.org
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
        SubsystemVendorID: 0x17aa SubsystemID: 0x2006
        IOBaseAddress: 0x2000
        Filename:             
        BIOS Bootup Message: M64CSP/M62CSP/M54CSP/M52CSP
BIOS                                            
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory
instead
(II) RADEON(0): Default Engine Clock: 452000
(II) RADEON(0): Default Memory Clock: 352000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed

... and so on until card14. /dev/dri is really empty, although I have
loaded the radeon and drm kernel modules. My kernel is 2.6.22, and the
radeon driver is 6.9.0 ..

Thanks, Yours, Florian
-- 
0666 - Filemode of the Beast




More information about the xorg mailing list