xorg 7.2, No devices detected.

Wed Jan 30 23:56:59 PST 2008

Hi,

as I did not approach, I would like to ask, if there would be someone,
who could tell me, where the problem could be or what diagnostic tools
should be used. I really do not know, who to specify BusID in xorg.conf,
if lspci gives me 

0001:02:00.0  VGA compatible controller: 3DLabs Unknown device 0032

thanks again

jachym

Jachym Cepicky píše v So 26. 01. 2008 v 16:42 +0100:
> Hi,
> I just try to setup Xorg 7.2 on Sparc Ultra 45 Workstation. I use Linux,
> Ubuntu 7.10 for sparc. The system works, except for X.
> 
> When I run startx command, I get
> 
> $ startx
> 
> xauth:  creating new authority file /home/chmu/.serverauth.12973
> 
> X Window System Version 1.3.0
> Release Date: 19 April 2007
> X Protocol Version 11, Revision 0, Release 1.3
> Build Operating System: Linux Ubuntu (xorg-server
> 2:1.3.0.0.dfsg-12ubuntu8.3)
> Current Operating System: Linux graham-chapman 2.6.22-14-sparc64-smp #1
> SMP Sun Oct 14 22:55:24 GMT 2007 sparc64
> Build Date: 18 January 2008
>         Before reporting problems, check http://wiki.x.org
>         to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 26 16:34:00 2008
> (==) Using config file: "/etc/X11/xorg.conf"
> (EE) No devices detected.
> 
> Fatal server error:
> no screens found
> XIO:  fatal IO error 54 (Connection reset by peer) on X server ":0.0"
>       after 0 requests (0 known processed) with 0 events remaining.
> 
> $
> 
> I configured the xorg.conf file like this:
> [...]
> Section "Device"
>         Identifier      "Generic Video Card"
>         Driver          "vga"
>         BusID           "PCI:02:00:0"
>         Option          "UseFBDev"      "false"
> EndSection
> [...]
> 
> lspci -v says:
> [..]
> 0001:00:00.0 Host bridge: 3DLabs Unknown device 0032 (rev 01)
>         Subsystem: 3DLabs Unknown device 0178
>         Flags: fast devsel, IRQ 2147483647
>         Memory at <ignored> (32-bit, non-prefetchable)
>         Memory at <ignored> (32-bit, prefetchable)
>         Expansion ROM at <ignored> [disabled]
>         Capabilities: <access denied>
> 
> 0001:02:00.0 VGA compatible controller: 3DLabs Unknown device 0032 (rev
> 01) (prog-if 00 [VGA controller])
>         Subsystem: 3DLabs Unknown device 0178
>         Flags: fast devsel, IRQ 14
>         Memory at 7f700100000 (32-bit, non-prefetchable) [size=512K]
>         Memory at 7f710000000 (32-bit, prefetchable) [size=256M]
>         Expansion ROM at 7f700180000 [disabled] [size=64K]
>         Capabilities: <access denied>
> 
> and lspci -n says:
> [..]
> 0001:00:00.0 0600: 3d3d:0032 (rev 01)
> 0001:02:00.0 0300: 3d3d:0032 (rev 01)
> 
> cat /var/log/Xorg.0.log |grep PCI
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 02:00:0: chip 10b5,8532 card 0000,0000 rev aa class 06,04,00
> hdr 01
> (II) PCI: 03:01:0: chip 10b5,8532 card 0000,0000 rev aa class 06,04,00
> hdr 01
> (II) PCI: 03:02:0: chip 10b5,8532 card 0000,0000 rev aa class 06,04,00
> hdr 01
> (II) PCI: 03:03:0: chip 10b5,8532 card 0000,0000 rev aa class 06,04,00
> hdr 01
> (II) PCI: 03:08:0: chip 10b5,8532 card 0000,0000 rev aa class 06,04,00
> hdr 01
> (II) PCI: 03:09:0: chip 10b5,8532 card 0000,0000 rev aa class 06,04,00
> hdr 01
> (II) PCI: 04:00:0: chip 10b9,5249 card 0000,0000 rev 00 class 06,04,00
> hdr 01
> (II) PCI: 05:1c:0: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10
> hdr 80
> (II) PCI: 05:1c:1: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10
> hdr 80
> (II) PCI: 05:1c:2: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10
> hdr 80
> (II) PCI: 05:1c:3: chip 10b9,5239 card 10b9,5238 rev 01 class 0c,03,20
> hdr 80
> (II) PCI: 05:1d:0: chip 10b9,5455 card 10b9,5455 rev 21 class 04,01,00
> hdr 80
> (II) PCI: 05:1f:0: chip 10b9,5229 card 10b9,5229 rev c8 class 01,01,8f
> hdr 00
> (II) PCI: 06:00:0: chip 1166,0103 card 0000,0000 rev b3 class 06,04,00
> hdr 01
> (II) PCI: 07:04:0: chip 14e4,1678 card 108e,1678 rev a2 class 02,00,00
> hdr 80
> (II) PCI: 07:04:1: chip 14e4,1678 card 108e,1678 rev a2 class 02,00,00
> hdr 80
> (II) PCI: 0a:00:0: chip 8086,0340 card 0000,0000 rev 09 class 06,04,00
> hdr 81
> (II) PCI: 0a:00:2: chip 8086,0341 card 0000,0000 rev 09 class 06,04,00
> hdr 81
> (II) PCI: 0b:01:0: chip 1000,0050 card 1000,3020 rev 02 class 01,00,00
> hdr 00
> (II) PCI: End of PCI scan
> 
> The graphic card should be
> 
> 3DLabs Wildcat Realizm
> 
> So, what to do? I would say, that the graphic card can not be detected
> properly. What should I do to get Xorg running on the system? How to
> interpret the lspci output in order to be able setup xorg.conf properly?
> 
> Thanks for any help
> 
> Jachym
> 
> P.S. 
> http://les-ejk.cz/tmp/Xorg.0.log
> http://les-ejk.cz/tmp/lspci.txt
> http://les-ejk.cz/tmp/xorg.scanpci.txt
> http://les-ejk.cz/tmp/xorg.conf
> 
> 
> _______________________________________________
> xorg mailing list
> xorg at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/xorg
-- 
Jachym Cepicky
e-mail: jachym.cepicky at gmail.com
URL: http://les-ejk.cz
GPG: http://www.les-ejk.cz/pgp/jachym_cepicky-gpg.pub

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Toto je digit?ln? podepsan? ??st zpr?vy
URL: <http://lists.x.org/archives/xorg/attachments/20080131/f8f6de13/attachment.pgp>