Unable to clone display on Intel 855GM

Michael Mestre michael.mestre at free.fr
Fri Jan 25 09:09:50 PST 2008


Summary : X boots in 1024x768, ignoring my 800x600 request, on my
Intel855GM laptop. Also, it will not  let me have my way with the
"clone" option.
---
Hi,

I would like to ask about a display layout problem on an Intel 855GM (in
an asus laptop with a native screen res of 1024x768)
I have a videoprojector with a 800x600 resolution that I want to connect
to the VGA port of my laptop. My goal for now is to have both the laptop
LCD and the VGA port running at 800x600 resolution, in clone mode.
I have Xorg-X11 version 7.2, and I use the i915 driver.

So far, I have been unable to do that : X starts at 1024x768, regardless
of the resolution specified in xorg.conf
If I connect the projector to the VGA port, it is indeed cloned, but
only in 640x480.
(Strangely enough, it seems that X also ignores my Option "Xinerama"
"off", and installs the VGA port as a second display ; I haven't checked
this in detail, but KDE sees two display - one in 1024x768, the other
one in 640x480 ; the second one being a cropped version of the first).

It is particularly infuriating because I had succeeded in setting this
up with a previous version of X, maybe a year ago. Since then, I lost
the xorg config file..

I hope that someone can help me with this.. Thanks a lot in advance..
Michael

Here's my xorg.conf file (with some unrelevant lines deleted) :
------------------------------------------------------------------------------------
# $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.44
2001/12/17 20:52:29 dawes Exp $
#

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"
    [...]
EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************

Section "Module"

    Load "dbe"   
    Load "v4l"
    Load "glx"
    Load "dri"
    Load "synaptics"

    SubSection    "extmod"
    EndSubSection

    Load    "type1"
    Load    "freetype"

EndSection

# **********************************************************************
# Server flags section.  This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"
    Option    "blank time"    "20"    # 20 minutes
    Option    "off time"    "30"
EndSection

# **********************************************************************
# Input devices
# **********************************************************************

Section "InputDevice"
    Identifier    "Keyboard1"
    Driver    "kbd"
    Option    "AutoRepeat"    "250 30"
    Option    "XkbModel"    "pc105"
    Option    "XkbLayout"    "fr"
EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option    "Device"    "/dev/input/mice"
    Option      "Protocol"     "ExplorerPS/2"
    Option      "ZAxisMapping" "4 5"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"
    Identifier    "LVDS"
    Option "DPMS"
    Option "PreferredMode"  "800x600"
EndSection

Section "Monitor"
    Identifier     "VGA"
      DisplaySize    800 600
      VendorName     "InFocus"
      ModelName      "beamer"
      Option         "DPMS"
      Option "Enable"  "true"        
    VertRefresh    60
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier    "Intel GPU"
    Driver    "i810"
    Option "Clone" "true"
        Option "MonitorLayout" "VGA,LVDS"
    Option          "monitor-LVDS" "LVDS"
    Option          "monitor-VGA" "VGA"
    Option "FixedPipe"    "LVDS"
EndSection

# **********************************************************************
# Screen sections.
# **********************************************************************

Section "Screen"
    Identifier "Screen0"
    Device     "Intel GPU"
    Monitor    "LVDS"
    DefaultDepth 24
   
    SubSection "Display"
        Depth 24        
        Modes "800x600"
     EndSubSection
 EndSection

Section "Screen"
    Identifier "Screen1"
    Device     "Intel GPU"
    Monitor    "VGA"
    DefaultDepth 24

    SubSection "Display"
        Depth 24            
        Modes "800x600"
     EndSubSection
 EndSection

# user have RW right to /dev/dri/card0
Section "DRI"
       Group        0
       Mode         0666
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"
    Identifier    "simple layout"
    Screen    "Screen 0"
    Screen    "Screen 1"
    InputDevice    "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    Option "Xinerama" "off"
    Option "Clone" "on"
EndSection


(end of xorg.conf)
-------------------

Here's the output from /var/log/Xorg.0.log (with some unrelevant lines
deleted) :
---------------------------------------------------------------------------------------------------

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux pomme 2.6.20-gentoo-r6 #7 SMP Fri Jan 25
18:41:04 CET 2008 i686
Build Date: 24 December 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 25 17:42:59 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "simple layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "LVDS"
(**) |   |-->Device "Intel GPU"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "VGA"
(**) |   |-->Device "Intel GPU"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) The directory "/usr/share/fonts/local/" does not exist.
    Entry deleted from font path.
[...]
(**) FontPath set to:
[...]
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "BlankTime" "20"
(**) Option "OffTime" "30"
(**) Option "Xinerama" "off"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d9520
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.2
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
[...]
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[...]
(--) PCI:*(0:2:0) Intel Corporation 82852/855GM Integrated Graphics
Device rev 2, Mem @ 0xf0000000/27, 0xfeb80000/19, I/O @ 0xdc00/3
(--) PCI: (0:2:1) Intel Corporation 82852/855GM Integrated Graphics
Device rev 2, Mem @ 0xe8000000/27, 0xfea80000/19
(II) Addressable bus resource ranges are
[...]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(WW) Warning, couldn't open module v4l
(II) UnloadModule: "v4l"
(EE) Failed to load module "v4l" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(WW) Warning, couldn't open module synaptics
(II) UnloadModule: "synaptics"
(EE) Failed to load module "synaptics" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.3.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 2.1.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Assigning device section with no busID to primary device
(WW) intel: More than one matching Device section found: Intel GPU
(--) Chipset 852GM/855GM found
(II) resource ranges after xf86ClaimFixedResources() call:
    [...]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.2
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB80000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using XAA for acceleration
(--) intel(0): Will try to allocate texture pool for old Mesa 3D driver.
(II) intel(0): Will try to reserve 32768 kiB of AGP aperture space
    for the DRM memory manager.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) intel(0): Output VGA using monitor section VGA
(**) intel(0): Option "Enable" "true"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS using monitor section LVDS
(**) intel(0): Option "PreferredMode" "800x600"
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 8000 kB
(II) intel(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics
Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME
Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(EE) intel(0): detecting sil164
(EE) intel(0): Unable to read from DVOI2C_E Slave 112.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(EE) intel(0): Unable to read from DVOI2C_E Slave 236.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(EE) intel(0): ivch: Unable to read register 0x00 from DVOI2C_B:04.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): detecting tfp410
(EE) intel(0): Unable to read from DVOI2C_E Slave 112.
(EE) intel(0): tfp410 not detected got VID FFFFFFFF: from DVOI2C_E Slave
112.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Output VGA enabled by config file
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): No remaining probed modes for output VGA
(II) intel(0): Output LVDS connected
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600
601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x59.3   64.23  1024 1048 1184 1344 
768 771 777 806 (47.8 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376 
768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312 
768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328 
768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344 
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624
625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600
637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600
601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600
601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600
601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481
484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489
492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481
484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490
492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401
404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401
404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382
385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA enabled by config file
(II) intel(0): Output LVDS connected
(EE) intel(0): Output VGA enabled but has no modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[...]
(II) intel(0): Kernel reported 110336 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 441340 kB available
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers and
           large DRI memory manager reservation:
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
    (Cannot allocate memory)
(II) intel(0): Allocating 5112 scanlines for pixmap cache
(II) intel(0): Success.
(II) intel(0): Memory allocation layout:
[...]
(II) intel(0): front buffer is not tiled
(II) intel(0): back buffer is tiled
(II) intel(0): depth buffer is tiled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): [drm] loaded kernel module for "i915" driver
(II) intel(0): [drm] DRM interface version 1.3
(II) intel(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) intel(0): [drm] added 8192 byte SAREA at 0xe0311000
(II) intel(0): [drm] mapped SAREA 0xe0311000 to 0xb7bd6000
(II) intel(0): [drm] framebuffer handle = 0xf07f0000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): Unable to use TTM-based memory manager with DRM version 1.6
(II) intel(0): [drm] Registers = 0xfeb80000
(II) intel(0): [drm] ring buffer = 0xf0000000
(II) intel(0): [drm] init sarea width,height = 1024 x 1024 (pitch 1024)
(II) intel(0): [drm] Mapping front buffer
(II) intel(0): [drm] Front Buffer = 0x2e0fe000
(II) intel(0): [drm] Back Buffer = 0xf2000000
(II) intel(0): [drm] Depth Buffer = 0xf2400000
(II) intel(0): [drm] textures = 0xf4800000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xf0000000,0x8000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        26 256x256 slots
        11 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
[...]
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 17
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(WW) intel(0): Option "Clone" is not used
(WW) intel(0): Option "MonitorLayout" is not used
(WW) intel(0): Option "FixedPipe" is not used
(WW) intel(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
[...]
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Mouse1: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Keyboard1: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button




More information about the xorg mailing list