[xf86-video-intel] Need help solving issue with intel driver & DDC monitor detection
Jerone Young
jerone at gmail.com
Sun Jan 13 23:20:52 PST 2008
See below...
On Jan 14, 2008 12:59 AM, Hong Liu <hong.liu at intel.com> wrote:
>
> On Mon, 2008-01-14 at 00:06 -0600, Jerone Young wrote:
> > When it works correctly xrandr reports (using VGA connected on startup):
> > ===========================================================
> > jerone at laptop:~$ xrandr --prop
> > Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 1920 x 1920
> > VGA connected 1920x1200+0+0 (normal left inverted right x axis y axis)
> > 518mm x 324mm
> > EDID_DATA:
> > 00ffffffffffff004c2dd9003432424e
> > 110f01036c3420a02aee95a3544c9926
> > 0f5054bfef80a9408180714f01010101
> > 010101010101283c80a070b023403020
> > 360006442100001a000000fd00374b1e
> > 5011000a202020202020000000fc0053
> > 796e634d61737465720a2020000000ff
> > 0048344b593430303634390a2020002d
> > 1920x1200 60.0*+
> > 1600x1200 59.9
> > 1280x1024 75.0 59.9
> > 1152x864 75.0 74.8
> > 1024x768 75.1 70.1 60.0
> > 832x624 74.6
> > 800x600 72.2 75.0 60.3 56.2
> > 640x480 75.0 72.8 66.7 60.0
> > 720x400 70.1
> > LVDS connected 1440x900+0+0 (normal left inverted right x axis y axis)
> > 303mm x 190mm
> > EDID_DATA:
> > 00ffffffffffff0030ae334000000000
> > 00110103801e1378eaae109658538c28
> > 24505421080001010101010101010101
> > 0101010101013226a04051841a303020
> > 36002fbe10000019d51fa04051841a30
> > 302036002fbe100000190000000f0090
> > 0a32900a28140100320cf800000000fe
> > 004c503134315750312d544c42370021
> > BACKLIGHT_CONTROL: kernel
> > supported: native legacy combination kernel
> > BACKLIGHT: 80 (0x00000050) range: (0,100)
> > 1440x900 60.0*+ 50.0
> > 1280x800 60.0
> > 1280x768 60.0
> > 1024x768 60.0
> > 800x600 60.3
> > 640x480 60.0 59.9
> > TMDS-1 disconnected (normal left inverted right x axis y axis)
> >
> >
> >
> > When is NOT working correctly xrandr reports (using VGA hotplugged):
> > =========================================================
> > jerone at laptop:~$ xrandr --prop
> > Screen 0: minimum 320 x 200, current 1440 x 900, maximum 1440 x 1440
> > VGA connected (normal left inverted right x axis y axis)
> > EDID_DATA:
> > 00ffffffffffff004c2dd9003432424e
> > 110f01036c3420a02aee95a3544c9926
> > 0f5054bfef80a9408180714f01010101
> > 010101010101283c80a070b023403020
> > 360006442100001a000000fd00374b1e
> > 5011000a202020202020000000fc0053
> > 796e634d61737465720a2020000000ff
> > 0048344b593430303634390a2020002d
> > 1280x1024 75.0 59.9
> > 1152x864 75.0 74.8
> > 1024x768 75.1 70.1 60.0
> > 832x624 74.6
> > 800x600 72.2 75.0 60.3 56.2
> > 640x480 75.0 72.8 66.7 60.0
> > 720x400 70.1
> > LVDS connected 1440x900+0+0 (normal left inverted right x axis y axis)
> > 303mm x 190mm
> > EDID_DATA:
> > 00ffffffffffff0030ae334000000000
> > 00110103801e1378eaae109658538c28
> > 24505421080001010101010101010101
> > 0101010101013226a04051841a303020
> > 36002fbe10000019d51fa04051841a30
> > 302036002fbe100000190000000f0090
> > 0a32900a28140100320cf800000000fe
> > 004c503134315750312d544c42370021
> > BACKLIGHT_CONTROL: kernel
> > supported: native legacy combination kernel
> > BACKLIGHT: 80 (0x00000050) range: (0,100)
> > 1440x900 60.0*+ 50.0
> > 1280x800 60.0
> > 1280x768 60.0
> > 1024x768 60.0
> > 800x600 60.3
> > 640x480 60.0 59.9
> > TMDS-1 disconnected (normal left inverted right x axis y axis)
>
> For your VGA hotplug not working issue, it's actually not problem of the
> driver.
> You need to enlarge your virtual size in your xorg.conf. The default
> virtual size is the biggest resolution of your all outputs (picked at X
> server startup).
> So when hotplugging VGA monitor, the virtual size is 1440x1440, any
> resolutions bigger than this were filtered out by X server.
Ok that actually worked! Very odd behavior though. Shouldn't xrandr be
showing all the modes of the monitor regardless.. not just what fits
in the available virtual size (this causes confusion). But I just
upped the virtual size to "3360 1200" and when I hot plug via VGA it
now works.
>
> The DVI output issue seems like a bug, would you please open a bug in
> xorg bugzilla, attaching your xorg.conf and xorg log with modedebug
> turned on?
Yes I'll file a bug and get back to the list with more info in the
morning (my time) ;-)
>
> Thanks,
> Hong
>
>
More information about the xorg
mailing list