[ANNOUNCE] xf86-video-ati 6.8.0

Alex Deucher alexdeucher at gmail.com
Mon Feb 18 22:05:46 PST 2008


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


ATI 6.8.0 release

Major changes:

- - mach64, r128, radeon ported to libpciaccess
- - massive restructuring of ati wrapper
- - radeon support for r5xx, rs6xx, and r6xx chips using ATOMBIOS
- - return of zaphod mode support
- - radeon support for centered modes using scalers (selectable via
output attributes)
- - PAL tv-out fixed on supported chips
- - initial support for render accel on r3xx/r4xx chips (rotation)
- - fix TV option handling
- - Xv RGB fixes
- - XPRESS Xv fixes
- - improve bios/driver interaction on radeon
- - revert back to previous AGP mode behavior
- - lots of bug fixes

Alex Deucher (134):
      Initial integration of Atom code and some of Dave's code.
      More of Dave's ATOM init code.
      Initial support for r4xx
      WIP: get ATOM crtc stuff working on r4xx
      for r4xx ATOM cards, just use ATOM for PLL
      Add atombios files
      First round of avivo support
      add additional connector types
      more avivo updates
      add avivo output stuff
      add support for initing external tmds via ATOM
      fix and move crtc source set up atombios_output.c
      pull in another of Dave's fixes
      make sure to assign gpio
      add pci ids for X1550PRO
      turn off vga control when using ext modes
      use atom to program plls on r4xx
      combine outputs based on id
      make sure i2c bus exists before using it
      rework crtc output source setup
      Add full parsing support for atom bios connector table
      fix from last commit
      atombios_dac_detect() takes care of primary vs tv dac itself
      fix INMC() and OUTMC() on !AVIVO chips
      WIP: sync up with the latest ATOM bios code in rhd
      WIP: more new ATOM integration work
      WIP: new atom code comples.
      Few fixes from the last commit.
      RADEON: step one in output rework
      RADEON: unify DDC line handling
      RADEON: unify connectortype handling
      fix typo in loop
      CRTs/DFPs may share a DVI port, but TV and CV don't
      Don't detect TV out for now
      Don't assign a gpio for TV
      fix logic in connector table check for TVs and switch counter to
symbolic names
      RADEON: switch to using ATOM defines for bios device table
      RADEON: fixup for bios tables with wrong connector types
      RADEON: enable/disable the right TMDS controller
      RADEON: add LVDS atom support
      RADEON: store devices ids from bios for each driver output
      RADEON: make naming consistent and remove some cruft
      RADEON: major re-org and clean up of atom output control
      RADEON: provide clearer debugging info
      RADEON: attempt to fix crtc to output routing
      RADEON: fix crtc to output routing
      RADEON: reorder crtc/pll setup
      RADEON: add default connector table for avivo chips
      RADEON: move crtc output source selection into atombios_output.c
      RADEON: first pass at TV/Component video
      RADEON: re-org load detection for legacy chips
      RADEON: switch r4xx to atombios load detection
      RADEON: fix cursor offset on avivo chips
      RADEON: implement CLUT adjust support
      RADEON: small cleanup of pll code
      RADEON: disable atom pll set for r4xx cards
      RADEON: save/restore avivo crtc cursor control
      RADEON: remove unused cruft from last atom import
      RADEON: convert atombios connector table parsing to use ATOM structs
      RADEON: fix typo in previous commit
      RADEON: move GPIO lookup to a separate function
      RADEON: handle HMDI properly (untested) and fix some merge leftovers
      RADEON: fix rotation on avivo chips
      RADEON: rework PLL calculation
      RADEON: fix typo in previous cursor fix
      RADEON: clean up units in PLL calculation
      RADEON: fix sclock printout
      RADEON: fix typo from merge
      RADEON: post div tweaks for legacy radeon
      RADEON: more PLL tweaks
      RADEON: fix another merge error
      RADEON: re-org legacy crtc/output code into separate files
      RADEON: remove no longer used radeon_display.c
      RADEON: fix rn50 reversion from last merge
      RADEON: more re-org.  move XAA Mem init to radeon_accel.c
      RADEON: more re-org
      RADEON: clean up prototypes
      RADEON: fix pll input setup on mac cards
      RADEON: Add "IgnoreLidStatus" option
      RADEON: restore crtc regs before VGA regs.
      RADEON: default "IgnoreLidStatus" to TRUE
      RADEON: fix PAL tv-out
      RADEON: fix typo that broke tv load detection
      RADEON: Make sure all old IGP chips have HasSingleDac set
      RADEON: add support for ATOM component video table
      RADEON: preliminary support for ATOM RMX
      RADEON: various avivo tv-out related clean-ups
      RADEON: fix crash when setting rotation in the config file
      RADEON: fix compile
      RADEON: improve ntsc image centering
      RADEON: further fixup for pScrn->pScreen issue
      RADEON: fix tvdac load detection at server start up
      R128: Like powerpc, don't use VGA by default on sparc
      RADEON: Fix TVStandard option
      RADEON: add default outputs if no connected devices
      RADEON: Make default output actually work...
      RADEON: restore FP2 regs before external encoders
      RADEON: clean up output handling
      ATOMBIOS: disable the scaler by default on avivo cards
      R300: First pass at render accel
      R300: only enable render accel on non-IGP r3xx/r4xx chips for now
      R300: only init3d on r3xx
      RADEON: add a message about render accel on newer cards
      AVIVO: Add support for RMX
      RADEON: use radeon_output->Flags for tracking RMX rather than mode->Flags
      RADEON: make sure EXA Composite is actually disabled on XPRESS chips.
      ATOM: Use LVDS edid from bios if available
      RADEON: grab pll_in_min/pll_in_max from bios tables if available
      RADEON: get dac2 adj values from the bios tables
      RADEON: re-work i2c for DDC
      RADEON: adjust PAL mode hstart
      Revert "RADEON: adjust PAL mode hstart"
      RADEON: Add new RV380 pci id
      Seems the default is more reliable... we can't win.
      RADEON: update man page to reflect AGP 1x default revert
      RADEON: Implement "center" mode for RMX on legacy radeons
      RADEON: remove unused "aspect" scaler option
      RADEON: remove redundant RADEONDisableDisplays()
      RADEON: don't restore LVDS_PLL_CNTL for now
      RADEON: rework i2c handling
      RADEON: sync up with latest upstream versions
      R6xx: fix ddc after my i2c rework
      RADEON: Implement proper (hopefully) BIOS/DRIVER interaction for COM bios
      RADEON: Implement proper (hopefully) BIOS/DRIVER interaction for ATOM bios
      RADEON: always restore crtc1 before crtc0 when using both crtcs
      R6xx: make sure we set up the HDP base properly
      R6xx: add missing objects
      RADEON: make sure we always set up the FP crtc shadow registers for crtc0
      R6xx: bios scratch regs moved.
      R6xx: fix up use of bios scratch regs to reflect the new offsets
      R6xx: when both crtcs are in use make sure they are both enabled
      RADEON: disable LVDS if panel size is 0x0
      ATOM: fix RS6xx connector table parsing and fix some warnings
      Bump for 6.8 release

Arkadiusz Miskiewicz (2):
      RADEON: various cleanups
      configure.ac fixes

Brice Goglin (1):
      RADEON: print the name of the output when printing the EDID

Dave Airlie (76):
      r5xx: fix typo for crtc offset
      r5xx: fix typo for crtc offset
      Add copyright headers
      radeon: rename a large section of avivo regs to documented names
      remove avivo_reg.h
      atombios: fixup warnings in atombios files
      avivo i2c: consolidate the avivo i2c code
      make i2c unlock/lock registers for gpios
      add missing hpd register
      avivo: fixup some i2c stuff
      add x1900xt support
      fix type for r520 agp code
      restore avivo memory map registers at correct places
      i2c: fix bus enable stuff
      r520: nail i2c enable/disable issue
      add firegl card on ajaxs machine
      add z3ro's pciids
      makes 2-headed cursor work
      r5xx: cleanups after last merge
      r5xx: add 71c5 for macbook pro
      atombios: add all r5xx and r6xx pci ids
      atombios: add warnings for r500 and r600
      r600: block r600 startup due to lack of memory controller info
      r600: get r600 to work non-accelerated.
      r600: use standard memory controller setup paths
      rs690 is !> r600
      r600: add memory controller regs from AMD
      LVDS on r500/r600 needs some work disable mobile chips for now
      add missing files for make dist
      re-enable mobility chips
      avivo: fix typo in register saving
      r500: make vt switch work again for me
      atombios: add initial object header parsing for r600 cards
      atombios: use values from object header
      r600: add hi agp address for mc
      fix silly spaces
      radeon: fix up memory mapping issues for vt switch
      r5xx: cleanup pll code..
      r500: set default minimum pll freq
      legacy: fix fb/agp read/writes
      radeon: add in pll spread spectrum workaround
      powerpc: build fixes from last merge
      radeon: move savedreg/modereg into entity instead of info
      radeon: bring back zaphod all is forgiven.
      don't add fboffset to info->FB it already is mapped at the offset
      disable tiling for zaphod heads
      add support for building against legacy servers similiar to
Intel codepaths
      add more to configure.ac for using out-of-tree mode src
      fixup some warnings
      more zaphod fixes - some other work maybe needed
      radeon: cleanup pitch calculation and make r600 work again
      r600: add shadow support to r600 driver to at least make 2d useable
      fixup shadow setup on !r600
      fix big endian build since zaphod fixups
      more endian related fixage
      set ddc line correctly post-merge
      fixup clip test include handling
      fix mode bandwidth configure check
      atombios: add support for reading tv standard from atombios
      atombios: enable support for using tv timings
      atombios: enable TV-out detection code - tv out works for me with this
      r600: fix tv-out output naming
      PLL/r600: tweak pll to pick first one found instead of keeping going
      r600: fixup crash on unknown output type
      r600: change devices list depending on connector
      r500: tvout avoid doing dpms here it makes my tv mode go all crappy
      atombios: i2c lines are all done with sw so we can accept any of them.
      i2c: a line mux of 0 is valid
      fixup register 6594 save/restore
      r300: remove r300 specific vertex emission
      r300: move fragprog setup code to prepare composite for now
      add rv670 pciids
      make distcheck pass
      mach64: fix non pciaccess build
      r128/radeon: fix build without pciaccess
      r128/radeon: hopeful fix for non pci access code

David Miller (2):
      [RADEON]: Like powerpc, don't use VGA by default on sparc.
      [RADEON]: Add missing break in SCLK calculation.

George Sapountzis (31):
      [mach64] Drop symbol lists.
      Drop symbol lists from r128, radeon, theatre.
      r128: pci-rework conversion
      radeon: remove stray _X_EXPORT
      radeon: remove stray include
      ati wrapper: use pci ids
      atimisc: rename to mach64
      mach64: add version (need not match with ati)
      mach64: load for both "ati" and "mach64" as driver names
      ati wrapper: add DriverRec's and use them
      ati wrapper: xf86PciInfo.h is enough
      use stand-alone drivers for each chip family.
      mach64: workaround for corruption at upper-left
      mach64: add hint for sparc and minor cosmetic.
      mach64: BIOSBase is no longer used
      mach64: factor out BIOS clock parsing
      mach64: cosmetic
      mach64: consolidate refclk #1
      mach64: consolidate refclk #2
      mach64: complement hint for sparc
      mach64: factor out BIOS multimedia parsing
      mach64: minor cosmetic, DAC type
      mach64: minor cosmetic, LCD panel id
      mach64: factor out BIOS panel info parsing
      mach64: minor cosmetic, I2C type
      mach64: clean probe a little
      ati: drop duplicate pci-id defines
      r128: do not compile in PciChipsets twice
      ati wrapper: translate Device lines
      ati: convert to pci probe
      r128/radeon: probably correct fix for non pci access code

George Wu (3):
      Add LVTMA PWRSEQ registers to fix VT switching for LVDS
      RADEON/R600: small code cleanup
      r600: might as well fix VT for R600

Kristian Høgsberg (1):
      RADEON: fix crtc routing on r4xx cards when using atom to init DVO chip

Kusanagi Kouichi (1):
      radeon: Partial fix for XVideo RGB image distortions.

Maciej Cencora (2):
      atombios: initial rs690 patches
      RS690: Implement MC idle check

Michel Dänzer (2):
      radeon: Miscellaneous warning fixes.
      radeon: Adapt manpage to reality wrt AGP options.

Roland Scheidegger (1):
      bring back to life planar-to-packed conversion for rs4xx

git tag: xf86-video-ati-6.8.0

http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.8.0.tar.bz2
MD5: 3c97c7925ebf4162eeb3463e23adc0e3  xf86-video-ati-6.8.0.tar.bz2
SHA1: b6974237b6ae9b45b32fc37f31a3fee7358230d3  xf86-video-ati-6.8.0.tar.bz2

http://xorg.freedesktop.org/archive/individual/driver/xf86-video-ati-6.8.0.tar.gz
MD5: 3260d03f5c7eed15087bc5c4f5be2ea3  xf86-video-ati-6.8.0.tar.gz
SHA1: e18bba3752c5c19b08e7c999bb847ae56db049fe  xf86-video-ati-6.8.0.tar.gz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFHunFrm07k+YR03kARAnP9AJ0TspQTmXNpfuwsxCha2J3kMKcUMgCgwsG6
V9XcduCYZkWVLXNfkW5DWfw=
=KFbB
-----END PGP SIGNATURE-----



More information about the xorg mailing list